LED HALTER LED HOLDER teilumhullter Halter fur folgende COBs : 433 Citizen CLU036 /038 /039 /03H / CLU720 /721 Edison Opto HM16 / HM24 / HM30 Everlight XUAN 1919 Lextar PB16H01 / PB19H01 / PB26H01 LG Innotek unenclosed holder for the following COBs: Bemessungsspannung rated voltage Bemessungsstrom rated current Bemessungstemperatur rated operating temperature Standard Anschluleitung standard connection lead CHM-9-XH / CHM-11-XH / CXM-11-AC / CXM-14-AC Prolight Opto COB PACK Tridonic SLE G7 LES13 /LES15 / G1 11mm / 15mm SUNSET VS Lighting LUGA DMS125 / 126 / 128***W Standard 80 V DC optional 150/450V DC Wichtige LED Abmessungen Important LED dimensions 5A T 180 SiF 0,35mm, 300V 0,35 - 1,0mm conductor size 22 - 18 AWG Befestigung min. 2 Schrauben M3 fixing min. 2 screws M3 max. torque 25W / 30W F-COB-G1 Luminus Anschlussquerschnitt max. Drehmonent 15W / 18W / 25W / 30W L-COB-G2 0,3 Nm Material des Halters Glimmer (Mikanit) material of the holder Mica Kontaktmaterial CuSn vergoldet contactmaterial CuSn gilded Zertifikate / certificates Ausweis-Nr. 40041342 File E472943 Weitere technische Daten und Montagehinweise sind im Technical Guide LED Halterserie 430 enthalten. Further technical details and mounting instructions are part of the Technical Guide LED holder series 430. Als Beispiel die Basisversion: Halter 433 Typ 2 e.g. the basic version: holder 433 type 2 Weitere Standardhalter finden Sie als Typ A1, F1, G2, K1, K2; L1, L5, Z1 ... unter LED Halter / Optik. More variants are available as Type A1, F1, G2, K1, K2, L1, L5, Z1 ... under COB holder / optics. Die Informationen in diesem Dokument sind ohne Gewahr und konnen ohne Vorankundigung geandert werden. The information in this document is provided without liability and subject to change without notice. (c) BENDER + WIRTH GMBH & CO. Rev.9 03/2019