VJ HVArc Guard(R) www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications FEATURES For this Worldwide Patented Technology * Specialty: high-voltage applications * MLCC that protects against surface arc-over * Excellent high-voltage performance * Higher capacitances and smaller case sizes that save board space, as compared to standard Available high-voltage MLCCs * Voltage breakdowns as much as twice that of competitors' products * Available with polymer termination for increase resistance to board flex cracking. Please contact factory for availability * Wet build process * Reliable Noble Metal Electrode (NME) system * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * * * * Power supplies DC/DC converters (buck and boost) Voltage multipliers for flyback converters For lighting and other AC applications please contact: mlcc@vishay.com ELECTRICAL SPECIFICATIONS C0G (NP0) X7R GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified Note Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Operating Temperature: -55 C to +125 C Capacitance Range: 10 pF to 8.2 nF Capacitance Range: 220 pF to 270 nF Voltage Range: 1000 VDC to 2500 VDC Voltage Range: 250 VDC to 1000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/C 30 ppm/C from -55 C to +125 C Temperature Coefficient of Capacitance (TCC): 15 % from -55 C to +125 C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 C 100 000 M min. or 1000 F whichever is less at +125 C 10 000 M min. or 100 F whichever is less Aging Rate: 0 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages 150 % of rated voltage 1000 VDC-rated: 1500 VDC, 2500 VDC-rated: 120 % of rated voltage Revision: 25-May-2018 Insulating Resistance: at +25 C 100 000 M min. or 1000 F whichever is less at +125 C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages 200 % of rated voltage 250 VDC-rated: 500 VDC-rated: min. 150 % of rated voltage 630 VDC, 1000 VDC-rated: min. 120 % of rated voltage Document Number: 45197 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HVArc Guard(R) www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CAPACITANCE CASE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 0805 1500 10 pF 390 pF 1206 1500 10 pF 1.5 nF 1210 1500 10 pF 2.7 nF 2220 1500 470 pF 5.6 nF 2225 2500 470 pF 8.2 nF 0805 1000 470 pF 3.3 nF 1206 1000 220 pF 47 nF 1210 1000 220 pF 82 nF 1808 1000 220 pF 100 nF 1812 1000 220 pF 270 nF C0G (NP0) X7R Note * Detail ratings see "Selection Chart" ORDERING INFORMATION (4) VJ0805 A 101 J X G A T 5Z (2) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE 0805 1206 1210 1808 1812 2220 2225 A = C0G (NP0) Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples 102 = 1000 pF 223 = 22 000 pF J=5% K = 10 % M = 20 % X = Ni barrier 100 % matte tin plate finish F, E = AgPd (3) B = polymer 100 % matte tin plate finish (4) P = 250 V E = 500 V L = 630 V G = 1000 V R = 1500 V O = 2500 V A= unmarked (5) 5Z = HVArc Guard(R) T = 7" reel / plastic tape R = 11 1/4" / 13" reel / plastic tape Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com (2) Process code has to be added (3) Termination code "E" is for conductive epoxy assembly, contact mlcc@vishay.com for availability (4) Please contact factory for polymer termination availability (5) Other termination options contact mlcc@vishay.com for availability ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION X Ni barrier 100 % tin plated matte finish Yes Yes E AgPd Yes Yes B Polymer layer, 100 % tin plated matte finish Yes No F AgPd Yes No Revision: 25-May-2018 RoHS COMPLIANT VISHAY GREEN Document Number: 45197 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HVArc Guard(R) www.vishay.com Vishay Vitramon DIMENSIONS in inches (millimeters) W L T MAX. P CASE CODE STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) TERMINATION PAD (P) MINIMUM MAXIMUM 0805 VJ0805 0.079 0.008 (2.00 0.20) 0.049 0.008 (1.25 0.20) 0.057 (1.45) 0.010 (0.25) 0.030 (0.76) 1206 VJ1206 0.126 0.008 (3.20 0.20) 0.063 0.008 (1.60 0.20) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1210 VJ1210 0.126 0.008 (3.20 0.20) 0.098 0.008 (2.50 0.20) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1808 VJ1808 0.180 0.012 (4.57 0.30) 0.080 0.010 (2.03 0.25) 0.067 (1.70) 0.010 (0.25) 0.035 (0.90) 1812 VJ1812 0.177 0.012 (4.50 0.30) 0.126 0.008 (3.20 0.20) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 2220 VJ2220 0.220 0.010 (5.59 0.25) 0.200 0.010 (5.08 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) 2225 VJ2225 0.220 0.010 (5.59 0.25) 0.250 0.010 (6.35 0.25) 0.090 (2.30) 0.010 (0.25) 0.037 (0.95) Note * Polymer (B-termination) have increased dimensions: part length increased by 0.006" (0.15 mm) Revision: 25-May-2018 Document Number: 45197 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HVArc Guard(R) www.vishay.com Vishay Vitramon SELECTION CHART C0G (NP0) DIELECTRIC C0G (NP0) STYLE VJ0805 CASE CODE VJ1206 0805 VOLTAGE (VDC) VOLTAGE CODE (1) VJ1210 (1) 1206 VJ2220 (1) 1210 VJ2225 (1) 2220 2225 1000 1500 1000 1500 1000 1500 1000 1500 1000 1500 2500 G R G R G R G R G R O CAP. CODE CAP. 100 10 pF * * * * * * 120 12 pF * * * * * * 150 15 pF * * * * * * 180 18 pF * * * * * * 220 22 pF * * * * * * 270 27 pF * * * * * * 330 33 pF * * * * * * 390 39 pF * * * * * * 470 47 pF * * * * * * 560 56 pF * * * * * * 680 68 pF * * * * * * 820 82 pF * * * * * * 101 100 pF * * * * * * 121 120 pF * * * * * * 151 150 pF * * * * * * 181 180 pF * * * * * * 221 220 pF * * * * * * 271 270 pF * * * * * * 331 330 pF * * * * * * 391 390 pF * * * * * * 471 470 pF * * * * * * * * * 561 560 pF * * * * * * * * * 681 680 pF * * * * * * * * * 821 820 pF * * * * * * * * * 102 1.0 nF * * * * * * * * * 122 1.2 nF * * * * * * * * * 152 1.5 nF * * * * * * * * * 182 1.8 nF * * * * * * * 222 2.2 nF * * * * * * * 272 2.7 nF * * * * * * * 332 3.3 nF * * * * * 392 3.9 nF * * * * * 472 4.7 nF * * * * * 562 5.6 nF * * * * * 682 6.8 nF * * * 822 8.2 nF * * * Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 * Available in plastic carrier tape only RoHS-compliant Revision: 25-May-2018 Document Number: 45197 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HVArc Guard(R) www.vishay.com Vishay Vitramon SELECTION CHART X7R DIELECTRIC STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF 683 68 nF 823 82 nF 104 100 nF 124 120 nF 154 150 nF 184 180 nF 224 220 nF 274 270 nF 334 330 nF VJ0805 0805 630 1000 250 L G P * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VJ1206 (1) 1206 500 630 1000 250 E L G P * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * X7R VJ1210 (1) 1210 500 630 1000 250 E L G P * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VJ1808 (1) 1808 500 630 1000 250 E L G P * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VJ1812 (1) 1812 500 630 1000 E L G * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 * Available in plastic carrier tape only RoHS-compliant Revision: 25-May-2018 Document Number: 45197 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HVArc Guard(R) www.vishay.com Vishay Vitramon HVArc Guard(R) C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS MINIMUM INSULATION RESISTANCE VS. TEMPERATURE TEMPERATURE COEFFICIENT OF CAPACITANCE 10 000 1.5 INSULATION RESISTANCE (F) % CAPACITANCE CHANGE 2.0 1.0 1000 0.5 0.0 -0.5 NP0 -1.0 -1.5 100 10 -2.0 -75 -50 -25 0 25 50 75 100 125 25 10 100 125 TEMPERATURE C TEMPERATURE C AGING RATE VOLTAGE COEFFICIENT OF CAPACITANCE 0.2 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 0.2 0.1 0.0 -0.1 - 0.2 0.1 0.0 -0.1 -0.2 1 10 100 1000 10 000 0 10 20 HOURS 30 40 50 60 70 80 90 100 DC VOLTS APPLIED IMPEDANCE VS. FREQUENCY OF 1206 NP0 HVArc Guard(R) 1000 IMPEDANCE () 100 470 pF 10 1000 pF 1 0.1 0.01 1 10 100 1000 FREQUENCY (MHz) Revision: 25-May-2018 Document Number: 45197 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HVArc Guard(R) www.vishay.com Vishay Vitramon HVArc Guard(R) X7R DIELECTRIC - TYPICAL PARAMETERS MINIMUM INSULATION RESISTANCE VS. TEMPERATURE TEMPERATURE COEFFICIENT OF CAPACITANCE 10 000 INSULATION RESISTANCE (F) % CAPACITANCE CHANGE 15 10 5 0 -5 -10 -15 -20 1000 100 10 -100 -50 0 50 100 150 10 25 TEMPERATURE C DISSIPATION FACTOR VS. TEMPERATURE AGING RATE 3.0 % DISSIPATION FACTOR 1.0 % CAPACITANCE CHANGE 100 125 TEMPERATURE C 0.0 -1.0 -2.0 -3.0 -4.0 1 10 100 1000 10 000 2.5 2.0 1.5 1.0 0.5 0 -100 -50 HOURS 50 100 150 IMPEDANCE VS. FREQUENCY OF 1206 HVArc Guard(R) CAPACITORS 100 IMPEDANCE () 0 TEMPERATURE C 10 33 nF 22 nF 15 nF 1 0.1 0.01 1 Revision: 25-May-2018 10 100 FREQUENCY (MHz) 1000 Document Number: 45197 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HVArc Guard(R) www.vishay.com Vishay Vitramon TYPICAL C0G (NP0) VOLTAGE BREAKDOWN TYPICAL X7R VOLTAGE BREAKDOWN 1000 V AVERAGE VOLTAGE BREAKDOWN (VDC) 3000 2900 2800 2700 2600 2500 2400 2300 2200 2100 2000 TYPICAL X7R VOLTAGE BREAKDOWN (n = 50, 500 V/s applied) 1500 V 3500 3000 2500 2000 1500 1000 500 0 PART RATED VOLTAGE HVArc Guard(R) 250 VDC 500 VDC HVArc Guard(R) Competitor AVERAGE VOLTAGE BREAKDOWN (VDC) TYPICAL C0G (NP0) VOLTAGE BREAKDOWN (n = 50, 500 V/s applied) 1000 VDC PART RATED VOLTAGE TYPICAL ARCING ON MLCCS (shown in polarized light) Crack caused by surface arc from end termination to top electrode layer cause component failure Corona traces due to arc-over become conductive paths leading to component failure APPLICATION NOTE * * * * Suitable only for transient voltage and not for periodical pulse(s) chain 1000 V rated parts are not suitable for AC / lighting applications above 220 VAC 500 V and 630 V are not suitable for AC / lighting applications above 110 VAC If further questions, please contact: mlcc@vishay.com STANDARD PACKAGING QUANTITIES CASE CODE TAPE SIZE 0805 1206 (4) 1210 (4) 1808 1812 2220 2225 8 mm 8 mm 8 mm 12 mm 12 mm 12 mm 12 mm (1)(2)(3) 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES PLASTIC TAPE PACKAGING CODE "T" 3000 2500 / 3000 2500 / 3000 2000 1000 1000 500 PLASTIC TAPE PACKAGING CODE "R" 10 000 10 000 10 000 10 000 4000 n/a n/a Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) 11 1/4" reel is standard for large quantities. 13" is maybe used for large "T" dimension parts (3) Reference: EIA standard RS 481 - "Taping of Surface Mount Components for Automatic Placement" (4) Packaging quantity can vary with product thickness Contact mlcc@vishay.com with respect to specific part number requirements STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 C to 40 C ambient temperature and 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 25-May-2018 Document Number: 45197 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VJ1206A100JXGAT5Z VJ1206A101JXGAT5Z VJ1206A101KXGAT5Z VJ1206A102JXGAT5Z VJ1206A102JXRAT5Z VJ1206A152JXGAT5Z VJ1206A220JXGAT5Z VJ1206A221JXGAT5Z VJ1206A331KXGAT5Z VJ1206A470JXGAT5Z VJ1206A471JXGAT5Z VJ1206Y101KXEAT5Z VJ1206Y101KXGAT5Z VJ0805A100JXGAT5Z VJ0805A220JXGAT5Z VJ0805A470JXGAT5Z VJ0805A470JXRAT5Z VJ0805A101JXGAT5Z VJ1206Y102MXLAT5Z VJ0805A121JXRAT5Z VJ1206Y102KXEAT5Z VJ1206Y102KXGAT5Z VJ1206Y103KXEAT5Z VJ1206Y103KXGAT5Z VJ1206Y221KXEAT5Z VJ1206Y221KXGAT5Z VJ1206Y222KXEAT5Z VJ1206Y222KXGAT5Z VJ1206Y223KXEAT5Z VJ1206Y223KXGAT5Z VJ1206Y471KXEAT5Z VJ1206Y471KXGAT5Z VJ1206Y472KXEAT5Z VJ1206Y472KXGAT5Z VJ1206Y473KXEAT5Z VJ1210A100JXGAT5ZL VJ1210A101JXGAT5Z VJ1210A102JXGAT5Z VJ1210A102JXRAT5Z VJ1210A220JXGAT5Z VJ1210A221JXGAT5Z VJ1210A222JXGAT5Z VJ1210A470JXGAT5Z VJ1210A471JXGAT5Z VJ1210A471JXRAT5Z VJ1210Y101KXEAT5Z VJ1210Y101KXGAT5Z VJ1210Y102KXEAT5Z VJ1210Y102KXGAT5Z VJ1210Y103KXEAT5Z VJ1210Y103KXGAT5Z VJ1210Y221KXEAT5Z VJ1210Y221KXGAT5Z VJ1210Y222KXEAT5Z VJ1210Y222KXGAT5Z VJ1210Y223KXEAT5Z VJ1210Y223KXGAT5Z VJ1210Y471KXEAT5Z VJ1210Y471KXGAT5Z VJ1210Y472KXEAT5Z VJ1210Y472KXGAT5Z VJ1210Y473KXEAT5Z VJ1210Y473KXGAT5Z VJ1210Y682KXLAT5Z VJ1808Y101KXEAT5Z VJ1808Y102KXEAT5Z VJ1808Y103KXEAT5Z VJ1808Y104KXPAT5Z VJ1808Y221KXEAT5Z VJ1808Y222KXEAT5Z VJ1808Y222KXPAT5Z VJ1808Y223KXEAT5Z VJ1808Y471KXEAT5Z VJ1808Y472KXEAT5Z VJ1808Y473KXEAT5Z VJ1812Y101KXEAT5Z VJ1812Y101KXPAT5Z VJ1812Y102KXEAT5Z VJ1812Y103KXEAT5Z VJ1812Y104KXEAT5Z VJ1812Y152KXEAT5Z VJ1812Y153KXPAT5Z VJ1812Y221KXEAT5Z VJ1812Y222KXEAT5Z VJ1812Y224KXPAT5Z VJ1812Y331KXEAT5Z VJ1812Y471KXEAT5Z VJ1812Y472KXEAT5Z VJ1812Y473KXEAT5Z VJ0805A101JXGAC5Z VJ0805A221JXGAT5Z VJ0805A470JXRAC5Z VJ1206A470JXGAT5ZL VJ1210A220JXGAT5Z VJ1210A470JXGAT5ZL VJ1206A100JXGAT5ZL VJ1206A220JXGAT5ZL VJ2220A102KXGAT5Z VJ1210A222KBRAT5ZL