VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 1Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Multilayer Ceramic Chip Capacitors
Prohibit Surface Arc-Over in High-Voltage Applications
FEATURES
For this Worldwide Patented Technology
• Specialty: high-voltage applications
• MLCC that protects against surface arc-over
• Excellent high-voltage performance
• Higher capacitances and smaller case sizes that
save board space, as compared to standard
high-voltage MLCCs
• Voltage breakdowns as much as twice that of competitors’ products
• Available with polymer termination for increase resistance to
board flex cracking. Please contact factory for availability
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Power supplies
•DC/DC converters (buck and boost)
• Voltage multipliers for flyback converters
• For lighting and other AC applications please contact:
mlcc@vishay.com
ELECTRICAL SPECIFICATIONS
Available
C0G (NP0)
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 8.2 nF
Voltage Range: 1000 VDC to 2500 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
1000 VDC-rated: 150 % of rated voltage
1500 VDC, 2500 VDC-rated: 120 % of rated voltage
X7R
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 220 pF to 270 nF
Voltage Range: 250 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
250 VDC-rated: 200 % of rated voltage
500 VDC-rated: min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 2Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Detail ratings see “Selection Chart”
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: mlcc@vishay.com
(2) Process code has to be added
(3) Termination code “E” is for conductive epoxy assembly, contact mlcc@vishay.com for availability
(4) Please contact factory for polymer termination availability
(5) Other termination options contact mlcc@vishay.com for availability
QUICK REFERENCE DATA
DIELECTRIC CASE MAXIMUM VOLTAGE
(V)
CAPACITANCE
MINIMUM MAXIMUM
C0G (NP0)
0805 1500 10 pF 390 pF
1206 1500 10 pF 1.5 nF
1210 1500 10 pF 2.7 nF
2220 1500 470 pF 5.6 nF
2225 2500 470 pF 8.2 nF
X7R
0805 1000 470 pF 3.3 nF
1206 1000 220 pF 47 nF
1210 1000 220 pF 82 nF
1808 1000 220 pF 100 nF
1812 1000 220 pF 270 nF
ORDERING INFORMATION (4)
VJ0805 A 101 J X G A T 5Z (2)
CASE
CODE
DIELECTRIC CAPACITANCE
NOMINAL
CODE
CAPACITANCE
TOLERANCE
TERMINATION
(5)
DC
VOLTAGE
RATING (1)
MARKING PACKAGING PROCESS
CODE
0805
1206
1210
1808
1812
2220
2225
A = C0G
(NP0)
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples
102 = 1000 pF
223 = 22 000 pF
J = ± 5 %
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % matte tin
plate finish
F, E = AgPd (3)
B = polymer
100 % matte tin
plate finish (4)
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
R = 1500 V
O = 2500 V
A =
unmarked
5Z = HVArc
Guard®
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel / plastic tape
ENVIRONMENTAL STATUS
TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN
X Ni barrier 100 % tin plated matte finish Yes Yes
EAgPdYesYes
B Polymer layer, 100 % tin plated matte finish Yes No
FAgPdYesNo
VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 3Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Polymer (B-termination) have increased dimensions:
part length increased by 0.006" (0.15 mm)
DIMENSIONS in inches (millimeters)
CASE
CODE STYLE LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
TERMINATION PAD
(P)
MINIMUM MAXIMUM
0805 VJ0805 0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.030 (0.76)
1206 VJ1206 0.126 ± 0.008
(3.20 ± 0.20)
0.063 ± 0.008
(1.60 ± 0.20) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76)
1210 VJ1210 0.126 ± 0.008
(3.20 ± 0.20)
0.098 ± 0.008
(2.50 ± 0.20) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76)
1808 VJ1808 0.180 ± 0.012
(4.57 ± 0.30)
0.080 ± 0.010
(2.03 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.035 (0.90)
1812 VJ1812 0.177 ± 0.012
(4.50 ± 0.30)
0.126 ± 0.008
(3.20 ± 0.20) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90)
2220 VJ2220 0.220 ± 0.010
(5.59 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95)
2225 VJ2225 0.220 ± 0.010
(5.59 ± 0.25)
0.250 ± 0.010
(6.35 ± 0.25) 0.090 (2.30) 0.010 (0.25) 0.037 (0.95)
LW
T
MAX.
P
VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 4Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Available in plastic carrier tape only
RoHS-compliant
SELECTION CHART C0G (NP0)
DIELECTRIC C0G (NP0)
STYLE VJ0805 VJ1206 (1) VJ1210 (1) VJ2220 (1) VJ2225 (1)
CASE CODE 0805 1206 1210 2220 2225
VOLTAGE (VDC) 1000 1500 1000 1500 1000 1500 1000 1500 1000 1500 2500
VOLTAGE CODE G R G R G R G R G R O
CAP. CODE CAP.
100 10 pF • • • • • •
120 12 pF • • • • • •
150 15 pF • • • • • •
180 18 pF • • • • • •
220 22 pF • • • • • •
270 27 pF • • • • • •
330 33 pF • • • • • •
390 39 pF • • • • • •
470 47 pF • • • • • •
560 56 pF • • • • • •
680 68 pF • • • • • •
820 82 pF • • • • • •
101 100 pF • • • • • •
121 120 pF • • • • • •
151 150 pF • • • • • •
181 180 pF • • • • • •
221 220 pF • • • • • •
271 270 pF • • • • • •
331 330 pF • • • • • •
391 390 pF • • • • • •
471 470 pF • • • • • • • • •
561 560 pF • • • • • • • • •
681 680 pF • • • • • • • • •
821 820 pF • • • • • • • • •
102 1.0 nF • • • • • • • • •
122 1.2 nF • • • • • • • • •
152 1.5 nF • • • • • • • • •
182 1.8 nF • ••••••
222 2.2 nF • ••••••
272 2.7 nF • ••••••
332 3.3 nF •••••
392 3.9 nF •••••
472 4.7 nF •••••
562 5.6 nF •••••
682 6.8 nF •••
822 8.2 nF •••
VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 5Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Available in plastic carrier tape only
RoHS-compliant
SELECTION CHART X7R
DIELECTRIC X7R
STYLE VJ0805 VJ1206 (1) VJ1210 (1) VJ1808 (1) VJ1812 (1)
CASE CODE 0805 1206 1210 1808 1812
VOLTAGE (VDC) 630 1000 250 500 630 1000 250 500 630 1000 250 500 630 1000 250 500 630 1000
VOLTAGE CODE L G P E L G P E L G P E L G P E L G
CAP. CODE CAP.
101 100 pF
121 120 pF
151 150 pF
181 180 pF
221 220 pF • • • • • • • • • • • • • • • •
271 270 pF • • • • • • • • • • • • • • • •
331 330 pF • • • • • • • • • • • • • • • •
391 390 pF • • • • • • • • • • • • • • • •
471 470 pF • • • • • • • • • • • • • • • • • •
561 560 pF • • • • • • • • • • • • • • • • • •
681 680 pF • • • • • • • • • • • • • • • • • •
821 820 pF • • • • • • • • • • • • • • • • • •
102 1.0 nF • • • • • • • • • • • • • • • • • •
122 1.2 nF • • • • • • • • • • • • • • • • • •
152 1.5 nF • • • • • • • • • • • • • • • • • •
182 1.8 nF • • • • • • • • • • • • • • • • • •
222 2.2 nF • • • • • • • • • • • • • • • • • •
272 2.7 nF • • • • • • • • • • • • • • • • • •
332 3.3 nF • • • • • • • • • • • • • • • • • •
392 3.9 nF • • • • • • • • • • • • • • • •
472 4.7 nF • • • • • • • • • • • • • • • •
562 5.6 nF • • • • • • • • • • • • • • • •
682 6.8 nF • • • • • • • • • • • • • • • •
822 8.2 nF • • • • • • • • • • • • • • • •
103 10 nF • • • • • • • • • • • • • • • •
123 12 nF • • • • • • • • • • • • • • •
153 15 nF • • • • • • • • • • • • • • •
183 18 nF • • • • • • • • • • • • • • •
223 22 nF • • • • • • • • • • • • • • •
273 27 nF • • • • • • • • • • • • • •
333 33 nF • • • • • • • • • • • • • •
393 39 nF • • • • • • • • • • • • • •
473 47 nF • • • • • • • • • • • • • •
563 56 nF • • • • • • • •
683 68 nF • • • • • •
823 82 nF • • • • • •
104 100 nF • • • •
124 120 nF •
154 150 nF •
184 180 nF •
224 220 nF •
274 270 nF •
334 330 nF
VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 6Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVArc Guard® C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
-75 -50 -25 0 25 50 75 100 125
2.0
1.5
1.0
0.5
0.0
-0.5
-1.0
-1.5
-2.0
NP0
TEMPERATURE °C
% CAPACITANCE CHANGE
TEMPERATURE COEFFICIENT OF CAPACITANCE
TEMPERATURE °C
10 25 100 125
10 000
1000
100
10
INSULATION RESISTANCE
(ΩF)
MINIMUM INSULATION RESISTANCE VS. TEMPERATURE
AGING RATE
HOURS
101 100 1000 10 000
0.2
0.1
0.0
-0.1
- 0.2
% CAPACITANCE CHANGE
0.2
0.1
0.0
-0.1
-0.2
DC VOLTS APPLIED
VOLTAGE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
0 10 20 30 40 50 60 70 80 90 100
0.01
0.1
1
10
100
1000
1 10 100 1000
FREQUENCY (MHz)
IMPEDANCE (Ω)
IMPEDANCE VS. FREQUENCY OF 1206 NP0 HVArc Guard®
470 pF
1000 pF
VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 7Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVArc Guard® X7R DIELECTRIC - TYPICAL PARAMETERS
-20
-15
-10
-5
0
5
10
15
-100 -50 0 50 100 150
TEMPERATURE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
TEMPERATURE °C
TEMPERATURE ° C
10 25 100 125
10 000
1000
100
10
INSULATION RESISTANCE (ΩF)
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
AGING RATE
HOURS
1.0
0.0
-1.0
-2.0
% CAPACITANCE CHANGE
-3.0
-4.0
1 10 100 1000 10 000
0
0.5
1.0
1.5
2.0
2.5
3.0
-100 -50 0 50 100 150
DISSIPATION FACTOR VS. TEMPERATURE
% DISSIPATION FACTOR
TEMPERATURE °C
IMPEDANCE VS. FREQUENCY
OF 1206 HVArc Guard® CAPACITORS
0.01
0.1
1
10
100
1
10 100
FREQUENCY (MHz)
IMPEDANCE (Ω)
1000
33 nF 22 nF 15 nF
VJ HVArc Guard®
www.vishay.com Vishay Vitramon
Revision: 25-May-2018 8Document Number: 45197
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) 11 1/4" reel is standard for large quantities. 13" is maybe used for large “T” dimension parts
(3) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(4) Packaging quantity can vary with product thickness
Contact mlcc@vishay.com with respect to specific part number requirements
TYPICAL C0G (NP0) VOLTAGE BREAKDOWN TYPICAL X7R VOLTAGE BREAKDOWN
TYPICAL ARCING ON MLCCS (shown in polarized light)
Crack caused by surface arc from end termination to top electrode
layer cause component failure
Corona traces due to arc-over become conductive paths leading to
component failure
APPLICATION NOTE
• Suitable only for transient voltage and not for periodical pulse(s) chain
• 1000 V rated parts are not suitable for AC / lighting applications above 220 VAC
• 500 V and 630 V are not suitable for AC / lighting applications above 110 VAC
• If further questions, please contact: mlcc@vishay.com
STANDARD PACKAGING QUANTITIES (1)(2)(3)
CASE CODE TAPE SIZE
7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES
PLASTIC TAPE PACKAGING CODE
“T”
PLASTIC TAPE PACKAGING CODE
“R”
0805 8 mm 3000 10 000
1206 (4) 8 mm 2500 / 3000 10 000
1210 (4) 8 mm 2500 / 3000 10 000
1808 12 mm 2000 10 000
1812 12 mm 1000 4000
2220 12 mm 1000 n/a
2225 12 mm 500 n/a
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and 70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
TYPICAL C0G (NP0) VOLTAGE BREAKDOWN
(n = 50, 500 V/s applied)
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
1000 V 1500 V
PART RATED VOLTAGE
AVERAGE VOLTAGE
BREAKDOWN (V
DC
)
TYPICAL X7R VOLTAGE BREAKDOWN
(n = 50, 500 V/s applied)
0
500
1000
1500
2000
2500
3000
3500
250 V
DC
500 V
DC
1000 V
DC
PART RATED VOLTAGE
AVERAGE VOLTAGE
BREAKDOWN (VDC)
HVArc Guard
®
HVArc Guard
®
Competitor
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
VJ1206A100JXGAT5Z VJ1206A101JXGAT5Z VJ1206A101KXGAT5Z VJ1206A102JXGAT5Z
VJ1206A102JXRAT5Z VJ1206A152JXGAT5Z VJ1206A220JXGAT5Z VJ1206A221JXGAT5Z VJ1206A331KXGAT5Z
VJ1206A470JXGAT5Z VJ1206A471JXGAT5Z VJ1206Y101KXEAT5Z VJ1206Y101KXGAT5Z
VJ0805A100JXGAT5Z VJ0805A220JXGAT5Z VJ0805A470JXGAT5Z VJ0805A470JXRAT5Z VJ0805A101JXGAT5Z
VJ1206Y102MXLAT5Z VJ0805A121JXRAT5Z VJ1206Y102KXEAT5Z VJ1206Y102KXGAT5Z VJ1206Y103KXEAT5Z
VJ1206Y103KXGAT5Z VJ1206Y221KXEAT5Z VJ1206Y221KXGAT5Z VJ1206Y222KXEAT5Z
VJ1206Y222KXGAT5Z VJ1206Y223KXEAT5Z VJ1206Y223KXGAT5Z VJ1206Y471KXEAT5Z VJ1206Y471KXGAT5Z
VJ1206Y472KXEAT5Z VJ1206Y472KXGAT5Z VJ1206Y473KXEAT5Z VJ1210A100JXGAT5ZL
VJ1210A101JXGAT5Z VJ1210A102JXGAT5Z VJ1210A102JXRAT5Z VJ1210A220JXGAT5Z VJ1210A221JXGAT5Z
VJ1210A222JXGAT5Z VJ1210A470JXGAT5Z VJ1210A471JXGAT5Z VJ1210A471JXRAT5Z VJ1210Y101KXEAT5Z
VJ1210Y101KXGAT5Z VJ1210Y102KXEAT5Z VJ1210Y102KXGAT5Z VJ1210Y103KXEAT5Z VJ1210Y103KXGAT5Z
VJ1210Y221KXEAT5Z VJ1210Y221KXGAT5Z VJ1210Y222KXEAT5Z VJ1210Y222KXGAT5Z
VJ1210Y223KXEAT5Z VJ1210Y223KXGAT5Z VJ1210Y471KXEAT5Z VJ1210Y471KXGAT5Z VJ1210Y472KXEAT5Z
VJ1210Y472KXGAT5Z VJ1210Y473KXEAT5Z VJ1210Y473KXGAT5Z VJ1210Y682KXLAT5Z
VJ1808Y101KXEAT5Z VJ1808Y102KXEAT5Z VJ1808Y103KXEAT5Z VJ1808Y104KXPAT5Z VJ1808Y221KXEAT5Z
VJ1808Y222KXEAT5Z VJ1808Y222KXPAT5Z VJ1808Y223KXEAT5Z VJ1808Y471KXEAT5Z
VJ1808Y472KXEAT5Z VJ1808Y473KXEAT5Z VJ1812Y101KXEAT5Z VJ1812Y101KXPAT5Z VJ1812Y102KXEAT5Z
VJ1812Y103KXEAT5Z VJ1812Y104KXEAT5Z VJ1812Y152KXEAT5Z VJ1812Y153KXPAT5Z
VJ1812Y221KXEAT5Z VJ1812Y222KXEAT5Z VJ1812Y224KXPAT5Z VJ1812Y331KXEAT5Z VJ1812Y471KXEAT5Z
VJ1812Y472KXEAT5Z VJ1812Y473KXEAT5Z VJ0805A101JXGAC5Z VJ0805A221JXGAT5Z
VJ0805A470JXRAC5Z VJ1206A470JXGAT5ZL VJ1210A220JXGAT5Z VJ1210A470JXGAT5ZL
VJ1206A100JXGAT5ZL VJ1206A220JXGAT5ZL VJ2220A102KXGAT5Z VJ1210A222KBRAT5ZL
