(R) (R) Cree XLamp XB-D LEDs PRODUCT DESCRIPTION FEATURES Table of Contents The * Cree's smallest lighting class Flux Characteristics.................... 2 LED: 2.45 X 2.45 mm Characteristics.......................... 4 XB-D white binned @ 85 C; Relative Spectral Power XB-D color binned @ 25 C Distribution.............................. 5 Up to 136 lm/W in cool white Relative Flux vs. Junction (@ 85 C, 350 mA) Temperature............................. 6 Available in white, 80-minimum Electrical Characteristics............. 7 CRI white, and 70-minimum Thermal Design......................... 8 Using Cree's newest generation of CRI cool white, royal blue, Relative Flux vs. Current............ 9 silicon carbide-based LED chips, blue, green, red-orange & red Relative Chromaticity vs. XLamp XB-D LED brings next generation performance and price to LED lighting applications. * The XLamp XB-D delivers similar performance to XLamp XP LEDs in * a package that is 48% smaller than the XP footprint. * XB-D is optimized to dramatically * 1 A maximum drive current Current.................................. 10 lower system cost in any illumination * Wide viewing angle: from 115 Relative Chromaticity vs. (white) to 140 (red) Temperature........................... 11 Reflow solderable - JEDEC Typical Spatial Distribution........ 11 J-STD-020C compatible Reflow Soldering Characteristics.12 Unlimited floor life at Notes..................................... 13 application. * * 30 C/85% RH Mechanical Dimensions............ 14 * Electrically neutral thermal path Tape and Reel......................... 15 * RoHS- and REACh-compliant Packaging............................... 16 * UL-recognized component www. cree.com/Xlamp (E349212) Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 CLD-DS45 Rev 7 Product family data sheet xlamp xB-D leds Flux Characteristics (TJ = 85 C) - White The following table provides several base order codes for XLamp XB-D LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XB-D Binning and Labeling document. Base Order Codes Min. Luminous Flux @ 350 mA CCT Range Color Min. Cool White 70 CRI Minimum Cool White Neutral White 80 CRI Minimum White Warm White 5000 K 5000 K 3700 K 2600 K 2600 K Max. 8300 K 8300 K 5000 K 6200 K 3700 K Calculated Minimum Luminous Flux (lm)** Order Code Group Flux (lm) @ 85 C Flux (lm) @ 25 C* 700 mA 1000 mA R2 114 130 196 253 XBDAWT-00-0000-000000E51 R3 122 139 210 271 XBDAWT-00-0000-000000F51 R4 130 148 224 289 XBDAWT-00-0000-000000G51 R2 114 130 196 253 XBDAWT-00-0000-00000BE51 R3 122 139 210 271 XBDAWT-00-0000-00000BF51 R4 130 148 229 289 XBDAWT-00-0000-00000BG51 Q4 100 114 172 222 XBDAWT-00-0000-00000LCE4 Q5 107 122 184 237 XBDAWT-00-0000-00000LDE4 R2 114 130 196 253 XBDAWT-00-0000-00000LEE4 Q2 87.4 100 150 194 XBDAWT-00-0000-00000HAE7 Q3 93.9 107 162 208 XBDAWT-00-0000-00000HBE7 Q4 100 114 172 222 XBDAWT-00-0000-00000HCE7 Q2 87.4 100 150 194 XBDAWT-00-0000-00000LAE7 Q3 93.9 107 162 208 XBDAWT-00-0000-00000LBE7 Q4 100 114 172 222 XBDAWT-00-0000-00000LCE7 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Neutral White, 3700 K - 5000K CCT is 75. * Typical CRI for Warm White, 2600 K - 3700 K CCT is 80. * Minimum CRI for 70 CRI Minimum Cool White is 70. * Minimum CRI for 80 CRI Minimum White is 80. * Flux values @ 25 C are calculated and are for reference only. ** Calculated flux values at 700 mA and 1000 mA are for 85 C and are for reference only. Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 2 xlamp xB-D leds Flux Characteristics (TJ = 25 C) - Color The following table provides several base order codes for XLamp XB-D LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XB-D Binning and Labeling document. Dominant Wavelength Range Min. Color Group Royal Blue Max. DWL (nm) D36 450 Group DWL (nm) D57 465 Dominant Wavelength Range Min. Color Group Blue Max. DWL (nm) B3 465 Group DWL (nm) B6 485 Dominant Wavelength Range Min. Color Group Green G2 Max. DWL (nm) 520 Group G4 DWL (nm) 535 Base Order Codes Min. Radiant Flux (mW) @ 350 mA Order Code Group Flux (mW) 30 (J) 450 XBDROY-00-0000-000000J01 31 (K) 475 XBDROY-00-0000-000000K01 32 (L) 500 XBDROY-00-0000-000000L01 33 (M) 525 XBDROY-00-0000-000000M01 34 (N) 550 XBDROY-00-0000-000000N01 35 (P) 575 XBDROY-00-0000-000000P01 Base Order Codes Min. Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) J0 23.5 XBDBLU-00-0000-000000X01 K2 30.6 XBDBLU-00-0000-000000Y01 K3 35.2 XBDBLU-00-0000-000000Z01 M2 39.8 XBDBLU-00-0000-000000201 Base Order Codes Min. Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) P4 80.6 XBDGRN-00-0000-000000901 Q2 87.4 XBDGRN-00-0000-000000A01 Q3 93.9 XBDGRN-00-0000-000000B01 Q4 100 XBDGRN-00-0000-000000C01 Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 3 xlamp xB-D leds Dominant Wavelength Range Min. Color Group RedOrange Max. DWL (nm) O3 Group 610 DWL (nm) O4 620 Dominant Wavelength Range Min. Color Group Red Max. DWL (nm) R2 Group 620 R3 DWL (nm) 630 Base Order Codes Min. Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) P2 67.2 XBDRDO-00-0000-000000701 P3 73.9 XBDRDO-00-0000-000000801 P4 80.6 XBDRDO-00-0000-000000901 Q2 87.4 XBDRDO-00-0000-000000A01 Q3 93.9 XBDRDO-00-0000-000000B01 Base Order Codes Min. Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) N3 56.8 XBDRED-00-0000-000000501 N4 62.0 XBDRED-00-0000-000000601 P2 67.2 XBDRED-00-0000-000000701 P3 73.9 XBDRED-00-0000-000000801 Note: Cree maintains a tolerance of +/- 7% on flux and power measurements. Characteristics Characteristics Unit Thermal resistance, junction to solder point - white, royal blue, blue C/W 6.5 Thermal resistance, junction to solder point - green C/W 11 Thermal resistance, junction to solder point - red-orange, red C/W 5 Viewing angle (FWHM) - white degrees 115 Viewing angle (FWHM) - royal blue, blue, green degrees 135 Viewing angle (FWHM) - red-orange, red degrees 140 Temperature coefficient of voltage - white mV/C -2.5 Temperature coefficient of voltage - royal blue, blue, green mV/C -3.3 Temperature coefficient of voltage - red-orange, red mV/C -2 ESD classification (HBM per Mil-Std-883D) DC forward current Minimum Typical Maximum Class 2 mA 1000 Reverse voltage V -5 Forward voltage (@ 350 mA, 85 C) - white V 2.9 3.5 Forward voltage (@ 350 mA, 25 C) - royal blue, blue V 3.1 3.7 Forward voltage (@ 350 mA, 25 C) - green V 3.3 3.9 Forward voltage (@ 350 mA, 25 C) - red-orange, red V 2.25 2.6 LED junction temperature C 150 Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 4 xlamp xB-D leds Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 5000K - 10000K CCT 60 3700K - 5000K CCT 2600K - 3700K CCT 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Radiant Power (%) 100% 80% Royal Blue 60% Blue Green 40% Red-Orange Red 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 5 xlamp xB-D leds Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350 mA) Relative Luminous Flux 120% 100% White 80% Blue 60% Green 40% Red-Orange, Red 20% Relative Flux Output vs. Junction Temperature 0% 25 royal blue 50 75 100 125 150 Junction Temperature (C) Relative Radiant Flux 120% 100% 80% 60% Royal Blue 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 6 xlamp xB-D leds Electrical Characteristics (TJ = 85 C) 1000 900 Forward Current (mA) 800 700 600 500 White 400 300 200 100 0 2.0 2.5 Electrical Characteristics (Tj = 25C) 3.0 3.5 4.0 Forward Voltage (V) Electrical Characteristics (TJ = 25 C) 1000 900 Forward Current (mA) 800 700 600 Royal Blue, Blue 500 Green 400 Red-Orange, Red 300 200 100 0 2.0 2.5 3.0 3.5 4.0 Forward Voltage (V) Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 7 xlamp xB-D leds Thermal Design Thermal white blue, blue The maximum forward current is determined by theroyal thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 1000 1000 Maximum Current (mA) 1200 Maximum Current (mA) 1200 800 600 Rj-a Rj-a Rj-a Rj-a 400 = = = = 10C/W 15C/W 20C/W 25C/W 200 800 600 Rj-a Rj-a Rj-a Rj-a 400 = = = = 10C/W 15C/W 20C/W 25C/W 200 0 0 0 20 40 60 80 100 120 0 140 20 40 Ambient Temperature (C) 60 80 100 120 140 120 140 Ambient Temperature (C) green 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) red-orange, red WhiteRoyal Blue, Blue 800 600 Rj-a = 15C/W Rj-a = 20C/W Rj-a = 25C/W 400 200 0 Rj-a Rj-a Rj-a Rj-a = = = = 10C/W 15C/W 20C/W 25C/W 800 600 Rj-a Rj-a Rj-a Rj-a 400 = = = = 10C/W 15C/W 20C/W 25C/W 200 0 0 20 40 60 80 100 Ambient Temperature (C) 120 140 0 20 40 60 80 100 Ambient Temperature (C) GreenRed-Orange, Red Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 8 xlamp xB-D leds Relative Flux vs. Current (TJ = 85 C) Relative Luminous Flux 300% 250% 200% 150% White 100% 50% Relative Intensity vs. Current (Tj = 0 100 200 300 400 500 600 25C) 700 800 0% 900 1000 Forward Current (mA) Relative Flux vs. Current (TJ = 25 C) Relative Luminous Flux 300% 250% 200% Blue 150% Green 100% Red-Orange, Red 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 9 Relative Intensity vs. Current (Tj = 25C) xlamp xB-D leds royal blue Relative Flux vs. Current (TJ = 25 C) - Continued Relative Radiant Flux 300% 250% 200% 150% Royal Blue 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Chromaticity Vs. Current, Relative Chromaticity vs. Current (WarmWW White) 0.020 T = 85 C J 0.015 0.010 0.005 0.000 CCx CCy -0.005 -0.010 -0.015 -0.020 0 100 200 300 400 500 600 700 800 900 1000 Current (mA) Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 10 xlamp xB-D leds Relative Chromaticity Vs. Temperature WW Relative Chromaticity vs. Temperature (Warm White) 0.020 0.015 I = 350 mA F 0.010 0.005 0.000 CCx CCy -0.005 -0.010 -0.015 -0.020 0 25 50 75 100 125 150 Tsp (C) Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity 100% 80% 60% White Royal Blue, Blue, Green 40% Red-Orange, Red 20% 0% -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle () Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 11 xlamp xB-D leds Reflow Soldering Characteristics In testing, Cree has found XLamp XB-D LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 Profile Feature t 25C to Peak Time Lead-Based Solder Lead-Free Solder 3 C/second max. 3 C/second max. Preheat: Temperature Min (Tsmin) 100 C 150 C Preheat: Temperature Max (Tsmax) 150 C 200 C 60-120 seconds 60-180 seconds Average Ramp-Up Rate (Tsmax to Tp) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5 C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 C to Peak Temperature 183 C 217 C 60-150 seconds 60-150 seconds 215 C 260 C 10-30 seconds 20-40 seconds 6 C/second max. 6 C/second max. 6 minutes max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 12 xlamp xB-D leds Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on Cree's lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity In testing, Cree has found XLamp XB-D LEDs to have unlimited floor life in conditions 30 C/85% relative humidity (RH). Moisture testing included a 168-hour soak at 85 C/85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDs to the resealable moisture-barrier bag and closing the bag immediately after use. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as amended through June 8, 2011. RoHS Declarations for this product can be obtain from your Cree representative or obtained from the Product Ecology section of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notices of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. Historical REACh banned substance information (substances restricted or banned in the EU prior to 2010) is also available upon request. UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory Claim WARNING: Do not look at exposed lamp in operation. Eye injury can result. See the LED Eye Safety application note at www.cree.com/xlamp_app_notes/led_eye_safety. Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 13 xlamp xB-D leds 6 5 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. 3 2 Mechanical Dimensions REV All measurements are .13 mm unless otherwise indicated. D 1.84 2.45 6 5 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. 0.76 1.633 0.355 3 0.817 REV D 1.84 2.45 2.45 1.633 2.285 0.355 0.76 ANODE 0.817 ANODE C R1.086 0.462 2.45 0.65 Top View 2.285 0.923 Bottom View* Side View C R1.086 * 0.462 Note: In December, 2012, Cree changed the thermal pad of the XB-D package to include the anode notch illustrated 0.923 0.65 have a different visual appearance. above. XB-D LEDs produced prior to implementation of this change may 0.36 0.426 0.46 B 0.852 0.426 0.82 0.36 0.426 0.82 0.46 B 0.36 2.34 0.852 0.426 0.284 2.272 1.136 0.36 A 2.34 0.284 2.272 0.284 0.28 0.36 1.136 0.284 0.92 2.34 0.284 0.28 RECOMMENDED PCB 0.36 SOLDER PAD 0.92 A RECOMMENDED STENCIL PATTERN (HATCHED 0.284 AREA IS OPENING) 2.272 2.34 RECOMMENDEDPCB PCB SOLDER PAD Pad Recommended Solder THIRD ANGLE PROJECTION RECOMMENDED STENCIL PATTERN UNLESS OTHERWISE SPECIFIED D. CRONIN 09/ DIMENSIONS ARE IN CHECK DAT MILLIMETERS AND AFTER FINISH. -TOLERANCE UNLESS SPECIFIED: .XX .25 APPROVED DAT .XXX .125 DRAWN BY SPECIFIED X UNLESS .5OTHERWISE DIMENSIONS ARE IN 5 -- Recommended Stencil Pattern (HATCHED AREA IS OPENING) 4 .X .XX .XXX X 3 1.5 .75 .25 .5 SURFACE FINISH: 1.6 6 5 4 D. CRONIN MATERIAL FOR SHEET METAL PARTSAND ONLY MILLIMETERS AFTER FINISH. CHECK .X TOLERANCE 1.5 UNLESS SPECIFIED: -.XX .75.XX .25 APPROVED .XXX .25.XXX .125 FINAL PROTECTIVE FINISH .5 X .5 X THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY SURFACE FINISH: 1.6 6 DAT DRAWN BY 2.272 3 Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 14 -- MATERIAL 2 FINAL PROTECTIVE 6 DETAIL B SCALE 2 : 1 5 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. 3 2 1 REVISONS REV DESCRIPTION BY A Released DC B ADDED CATHODE AND ANODE NOTE C CHANGED POCKET DIMS AND TOLERANCES DATE APP'D 10/23/11 JL xlamp xB-D leds DC DC 2/26/12 8/3/12 D D Tape and Reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm Tolerance unless specified: .XX .25, .XXX .125, X .5 C 1.50 +.10/-.00 C 1.75 .10 4.00 .10 CATHODE SIDE 2.00 .10 B B 2.60+/-0.1mm 4 1.5.1 4.0.1 10.25 .10 8.0.1 1.75.10 12.00 Nominal 12.30 Max .30 .10 8.00 .10 B 2.5.1 Cathode Side ANODE SIDE B 5.50 .10 1.00 .10 +.3 12.0 .0 2.05 +/-0.1 AnodeB-BSide SECTION (denoted by + and circle) 2.60 +/-0.1 A REFERENCE VENDOR PART NUMBER 020246 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 DATE DRAWN BY D. CRONIN 4600 Silicon Drive Durham, N.C 27703 10/23/11 User Feed Direction END THIRD ANGLE PROJECTION Notes: 1. 10 sprocket hole pitch cumulative tolerance 0.2mm FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 CHECK DATE APPROVED DATE MATERIAL SIZE FINAL PROTECTIVE FINISH SCALE SURFACE FINISH: 1.6 6 5 Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) 4 3 Loaded Pockets (1,000 Lamps) Phone (919) 313-5300 Fax (919) 313-5558 A START Carrier Tape, 2525 HEW TITLE C REV. DRAWING NO. 2402-00020 4.000 2 SHEET C OF 1 /1 1 Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 15 xlamp xB-D leds Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Qty, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Patent Label (on bottom of box) Copyright (c) 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 16