Loose RSB MKT Series Taped METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - HIGH TEMPERATURE D.C. AND PULSE APPLICATIONS STACKED VERSION Typical applications: blocking, coupling, decoupling for a signal from DC to high frequency; pulse, logic and timing circuit, lamp capacitor for electronic compact lamps, inverter for LCD monitors, automotive DC motor suppression. All dimensions are in mm. p = 5mm PRODUCT CODE: RSB Pitch Box thickness (B) (mm) (mm) 5.0 5.0 <4.5 4.5 Maximum dimensions (mm) B max H max L max B +0.1 B +0.1 H +0.1 H +0.1 L +0.2 L +0.3 Product code system GENERAL TECHNICAL DAta Dielectric: polyester film (polyethylene terephthalate). Plates: aluminium layer deposited by evaporation under 1 2 3 4 5 6 7 8 9 10 11 12 13 14 vacuum. Winding: non-inductive type. C R S B Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Digit 1 to 3 Series code. Box material is solvent resistant and flame Digit 4 d.c. rated voltage: retardant according to UL94. C = 50V D = 63VE= 100V I = 250V Marking: Series (RSB) capacitance, tolerance, D.C. rated M =400V W = 500V P = 630V voltage. Digit 5 Pitch: C = 5 mm Climatic category: 55/125/56 IEC 60068-1 Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Operating temperature range: -55 to +125C Capacitance value and the 6th digit indicates Related documents: IEC 60384-2 the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table1) Winding scheme Digit 12 Identifies the dimensions and electrical characteristics. Internal use Digit 13 Digit 14 Capacitance tolerance: single sided metallized J=5%; K=10%; M=20%. polyester film The part number, comprising 14 digits, is formed as follows: Table 1 (for more detailed information, please refer to page 14). Standard packaging style Lead length Ordering code (mm) (Digit 10 to 11) AMMO-PACK DQ Reel O 355 mm CK Loose, short leads 4 Loose, long leads 17+1/-2 +1.5 AA Z3 31 09/2008 RSB MKT Series METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - HIGH TEMPERATURE D.C. AND PULSE APPLICATIONS STACKED VERSION p = 5 mm PRODUCT CODE: RSB Rated Cap. 2.2F Rated Cap. 50Vdc/30Vac Std dimensions B H L p 6.0 11.0 7.2 5.0 Max dv/dt (V/ s) 200 Max K0 (V /s) 20 E3 0.10 F 63Vdc/40Vac Std dimensions B H L p 2.5 6.5 7.2 5.0 0.15 F 2.5 6.5 7.2 5.0 250 31.5 E3 0.22 F 2.5 6.5 7.2 5.0 250 31.5 E3 0.33 F 3.5 7.5 7.2 5.0 250 31.5 E3 0.47 F 3.5 7.5 7.2 5.0 250 31.5 E3 0.68 F 4.5 9.5 7.2 5.0 250 31.5 E3 1.0 F 5.0 10.0 7.2 5.0 250 31.5 E3 1.5 F 6.0 11.0 7.2 5.0 250 31.5 E3 Max dv/dt (V/ s) 300 Max K0 (V2/ s) 60 E3 Rated Cap. Max dv/dt (V/ s) 250 Max K0 (V2/s) 31.5 E3 4700 pF 100Vdc/63Vac Std dimensions B H L p 2.5 6.5 7.2 5.0 6800 pF 2.5 6.5 7.2 5.0 300 60 E3 0.010 F 2.5 6.5 7.2 5.0 300 60 E3 0.015 F 2.5 6.5 7.2 5.0 300 60 E3 0.022 F 2.5 6.5 7.2 5.0 300 60 E3 0.033 F 2.5 6.5 7.2 5.0 300 60 E3 0.047 F 2.5 6.5 7.2 5.0 300 60 E3 0.068 F 2.5 6.5 7.2 5.0 300 60 E3 0.10 F 3.5 7.5 7.2 5.0 300 60 E3 60 E3 RSBCC4220--1-Part Number RSBDC3100--0-RSBDC3150--0-RSBDC3220--1-RSBDC3330--0-RSBDC3470--1-RSBDC3680--1-RSBDC4100--1-RSBDC4150--1-- RSBEC1470--0-RSBEC1680--0-RSBEC2100--0-RSBEC2150--0-RSBEC2220--0-RSBEC2330--0-RSBEC2470--0-RSBEC2680--1-RSBEC3150--0-- 0.15 F 4.5 9.5 7.2 5.0 0.22 F 5.0 10.0 7.2 5.0 300 60 E3 0.33 F 6.0 11.0 7.2 5.0 300 60 E3 0.47 F 6.0 11.0 7.2 5.0 300 60 E3 Max dv/dt (V/ s) 400 Max K0 Part Number (V / s) 20 E4 RSBIC1100--0-- 1000 pF 250Vdc/160Vac Std dimensions B H L p 2.5 6.5 7.2 5.0 1500 pF 2.5 6.5 7.2 5.0 400 20 E4 2200 pF 2.5 6.5 7.2 5.0 400 20 E4 3300 pF 2.5 6.5 7.2 5.0 400 20 E4 4700 pF 2.5 6.5 7.2 5.0 400 20 E4 6800 pF 2.5 6.5 7.2 5.0 400 20 E4 0.010 F 2.5 6.5 7.2 5.0 400 20 E4 0.015 F 2.5 6.5 7.2 5.0 400 20 E4 0.022 F 3.5 7.5 7.2 5.0 400 20 E4 0.033 F 3.5 7.5 7.2 5.0 400 20 E4 0.047 F 4.5 9.5 7.2 5.0 400 20 E4 0.068 F 4.5 9.5 7.2 5.0 400 20 E4 0.10 F 5.0 10.0 7.2 5.0 400 20 E4 0.15 F 6.0 11.0 7.2 5.0 400 20 E4 RSBEC3220--0-RSBEC3470--1-- 2 Max K0 Part Number (V2/ s) 48 E4 RSBMC1100--0-- 1500 pF 2.5 6.5 7.2 5.0 600 48 E4 2200 pF 2.5 6.5 7.2 5.0 600 48 E4 3300 pF 2.5 6.5 7.2 5.0 600 48 E4 4700 pF 2.5 6.5 7.2 5.0 600 48 E4 6800 pF 3.5 7.5 7.2 5.0 600 48 E4 0.010 F 3.5 7.5 7.2 5.0 600 48 E4 0.015 F 3.5 7.5 7.2 5.0 600 48 E4 0.022 F 4.5 9.5 7.2 5.0 600 48 E4 0.033 F 5.0 10.0 7.2 5.0 600 48 E4 0.047 F 6.0 11.0 7.2 5.0 600 48 E4 Max dv/dt (V/ s) 700 Max K0 (V / s) 70 E4 RSBMC1150--0-- RSBMC1220--0-RSBMC1330--0-RSBMC1470--0-RSBMC1680--0-RSBMC2100--0-RSBMC2150--0-RSBMC2220--0-RSBMC2330--0-RSBMC2470--0-- 1000 pF 500Vdc/220Vac* Std dimensions B H L p 2.5 6.5 7.2 5.0 1500 pF 2.5 6.5 7.2 5.0 700 70 E4 2200 pF 3.5 7.5 7.2 5.0 700 70 E4 3300 pF 3.5 7.5 7.2 5.0 700 70 E4 4700 pF 3.5 7.5 7.2 5.0 700 70 E4 6800 pF 4.5 9.5 7.2 5.0 700 70 E4 0.010 F 5.0 10.0 7.2 5.0 700 70 E4 0.015 F 6.0 11.0 7.2 5.0 700 70 E4 Max dv/dt (V/ s) 800 800 800 800 800 800 800 Max K0 Part Number (V / s) 100 E4 100 E4 100 E4 100 E4 100 E4 100 E4 100 E4 RSBPC1100--0-RSBPC1150--0-RSBPC1220--0-RSBPC1330--0-RSBPC1470--0-RSBPC1680--0-RSBPC2100--0-- 1000 pF 1500 pF 2200 pF 3300 pF 4700 pF 6800 pF 0.010 F RSBEC3330--0-- Max dv/dt (V/ s) 600 1000 pF Rated Cap. RSBEC3100--0-- 400Vdc/200Vac Std dimensions H L p 6.5 7.2 5.0 B 2.5 Rated Cap. Part Number 300 Rated Cap. Rated Cap. Part Number 2 630Vdc/220Vac* Std dimensions B H L p 2.5 6.5 7.2 5.0 3.5 7.5 7.2 5.0 3.5 7.5 7.2 5.0 4.5 9.5 7.2 5.0 4.5 9.5 7.2 5.0 5.0 10.0 7.2 5.0 6.0 11.0 7.2 5.0 Part Number 2 RSBWC1100--0-RSBWC1150--0-- RSBWC1220--0-- RSBWC1330--0-- RSBWC1470--0-RSBWC1680--0-- RSBWC2100--0-RSBWC2150--0-- 2 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) RSBIC1150--0-- RSBIC1220--0-RSBIC1330--0-RSBIC1470--0-RSBIC1680--0-RSBIC2100--0-RSBIC2150--0-RSBIC2220--0-RSBIC2330--0-RSBIC2470--0-RSBIC2680--0-RSBIC3100--0-RSBIC3150--0-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. Note 1: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. Note 2: The rated voltages from 250Vdc to 630Vdc are for pulse applications (i.e.: lamp capacitors). *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 09/2008 32 RSB MKT Series METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - HIGH TEMPERATURE D.C. AND PULSE APPLICATIONS STACKED VERSION p = 5 mm PRODUCT CODE: RSB electrical characteristics Rated voltage (VR): 50 Vdc 63 Vdc 100 Vdc 250 Vdc 400 Vdc 500 Vdc 630 Vdc Rated temperature (TR): +85 C Temperature derated voltage: for temperatures between +85C and +125C a decreasing factor of 1.25% per degree C on the rated voltage VR (d.c. and a.c.) has to be applied. 1000pF to 2.2F Capacitance range: E6 series (IEC 60063 Norm). Capacitance values: Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M). Total self-inductance (L): 7nH max 1 nH per 1 mm lead and capacitor length. Dissipation factor (DF): tg 10-4 at +25C 5C kHz 1 10 100 C 0.1F 80 120 250 C > 0.1F 80 120 Insulation resistance: Test conditions +25C5C Temperature: Voltage charge time: 1 min Voltage charge: 50 Vdc for VR <100 Vdc 100 Vdc for VR 100 Vdc Performance For VR 100 Vdc 15000 M for C 0.33F 5000 s for C > 0.33F and 1F 1000 s for C > 1F For VR >100 Vdc 30000 M Test voltage between terminations: 1.6xVR applied for 2 s at +25C5C. Electrical characteristics for use as lamp capacitors in lighting applications. test method and performance Damp heat, steady state: Test conditions +40C2C Temperature: Relative humidity (RH): 93% 2% Test duration: 56 days Performance Capacitance change |C/C|: 5% 50x10-4 at 1kHz DF change (tgd): Insulation resistance: 50% of initial limit. Endurance: Test conditions +125C 2C Temperature: Test duration: 2000 h Voltage applied: 1.25xVC Performance Capacitance change |C/C|: 5% DF change (tg): 30x10-4 at 10kHz for C 1F 20x10-4 at 1kHz for C> 1F Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions +260C5C Solder bath temperature: Dipping time (with heat screen):10 s 1 s Performance Capacitance change |C/C|: 2% DF change (tg): 30x10-4 at 10kHz for C 1F 20x10-4 at 1kHz for C> 1F Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |C/C|: 3%for C 0.1F 2%for C> 0.1F Reliability: Reference MIL HDB 217 Application conditions: Temperature: +40C 2C Voltage: 0.5xVR Failure rate: 1 FIT (1 FIT = 1x10-9 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |C/C|: > 10% DF change (tg): > 2 x initial limit. Insulation resistance: < 0.005 x initial limit. 33 09/2008 RSB MKT Series METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - HIGH TEMPERATURE D.C. AND PULSE APPLICATIONS STACKED VERSION p = 5 mm PRODUCT CODE: RSB MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) Note: p (pitch) in mm. 09/2008 34 RSB MKT Series METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - HIGH TEMPERATURE D.C. AND PULSE APPLICATIONS STACKED VERSION p = 5 mm PRODUCT CODE: RSB MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) Note: p (pitch) in mm. 35 09/2008