Power Transistors 2SA0794, 2SA0794A (2SA794, 2SA794A) Silicon PNP epitaxial planar type Unit: mm For low-frequency output driver Complementary to 2SC1567 and 2SC1567A 8.0+0.5 -0.1 3.20.2 1.90.1 0.750.1 Absolute Maximum Ratings TC = 25C 0.50.1 0.50.1 4.60.2 Parameter Collector to base voltage 2SA0794 Collector to emitter voltage 2SA0794 Symbol Rating Unit VCBO -100 V 1 2 -100 VCEO 1.760.1 2.30.2 1: Emitter 2: Collector 3: Base TO-126B Package 3 -120 2SA0794A 3.050.1 * High collector to emitter voltage VCEO * Optimum for the driver stage of low-frequency and 40 W to 100 W output amplifier * TO-126B package which requires no insulation plate for installation to the heat sink 11.00.5 Features 16.01.0 3.80.3 3.160.1 V -120 2SA0794A -5 Emitter to base voltage VEBO V Peak collector current ICP -1 A Collector current IC - 0.5 A Collector power dissipation PC 1.2 W Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C Electrical Characteristics TC = 25C Parameter Symbol Conditions Min Typ Max VCEO IC = -100 A, IB = 0 Emitter to base voltage VEBO IE = -1 A, IC = 0 -5 Forward current transfer ratio hFE1 * VCE = -10 V, IC = -150 mA 90 hFE2 VCE = -5 V, IC = -500 mA 50 Collector to emitter saturation voltage VCE(sat) IC = -500 mA, IB = -50 mA - 0.2 - 0.4 V Base to emitter saturation voltage VBE(sat) IC = -500 mA, IB = -50 mA - 0.85 -1.2 V Collector to emitter voltage 2SA0794 fT Collector output capacitance V -120 2SA0794A Transition frequency -100 Unit Cob V 160 220 100 VCB = -10 V, IE = 50 mA, f = 200 MHz 120 VCB = -10 V, IE = 0, f = 1 MHz 20 MHz 30 pF Note) *: Rank classification Rank Q R hFE1 90 to 155 130 to 220 Note.) The Part numbers in the Parenthesis show conventional part number. 1 2SA0794, 2SA0794A Power Transistors PC T a IC VCE (1)With a 100x100x2mm Al heat sink (2)Without heat sink TC=25C -18mA IB=-20mA -16mA -12mA -14mA -10mA -8mA -6mA -1.0 4 3 -1.2 (1) 2 (2) 1 -0.8 -0.6 -4mA -0.4 -2mA -1.0 -0.2 0 0 Ambient temperature Ta (C) -2 -4 Collector to emitter saturation voltage VCE(sat) (V) VCE=-10V -0.5 Ta=125C -0.4 -25C 75C -0.3 -0.2 -6 -8 -10 -12 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 0 -3 IC/IB=10 -1 -0.3 TC=100C 25C -25C -0.1 -0.01 -0.01 -0.03 -0.1 -0.3 -1 100 -25C 25C 30 100C -0.3 25C -0.1 -0.03 -1 -0.1 -0.3 -1 Cob VCB 50 VCB=-10V 180 f=200MHz TC=25C 160 140 120 100 80 60 40 0 -0.3 Collector current IC (A) 2 TC=-25C Collector current IC (A) 20 -0.1 -1 -0.01 -0.01 Collector output capacitance Cob (pF) Transition frequency fT (MHz) Forward current transfer ratio hFE TC=100C -0.03 IC/IB=10 fT IE 300 -10 -12 -14 -0.03 200 1000 -8 -3 Collector current IC (A) VCE=-10V -6 VBE(sat) IC hFE IC 10 -0.01 -4 VCE(sat) IC Base to emitter voltage VBE (V) 3000 -2 Base current IB (mA) -0.03 -0.1 -0.4 Collector to emitter voltage VCE (V) IC VBE -0.6 -0.6 0 0 20 40 60 80 100 120 140 160 180 -0.8 -0.2 Base to emitter saturation voltage VBE(sat) (V) 0 Collector current IC (A) VCE=-10V TC=25C Collector current IC (A) 5 IC I B -1.2 Collector current IC (A) Collector power dissipation PC (W) 6 1 3 10 30 Emitter current IE (mA) 100 IE=0 f=1MHz TC=25C 40 30 20 10 0 -1 -3 -10 -30 -100 Collector to base voltage VCB (V) Power Transistors 2SA0794, 2SA0794A ICEO Ta 105 ICBO Ta 104 VCE=-20V Area of safe operation (ASO) -10 VCB=-20V Single pulse TC=25C -3 Collector current IC (A) 104 ICBO (Ta) ICBO (Ta=25C) ICEO (Ta) ICEO (Ta=25C) 103 103 102 102 -1 -0.3 ICP IC t=1s t=10ms -0.1 -0.03 -0.01 10 10 -0.003 1 1 0 20 40 60 80 100 120 140 160 180 200 Ambient temperature Ta (C) 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (C) -0.001 -1 -3 -10 -30 -100 -300 -1000 Collector to emitter voltage VCE (V) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR