Customer Specification
PART NO. 74002
Construction
Applicable Specifications
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com
Diameters (In)
1) Component 1 2 X 1 PAIR
a) Conductor 26 (7/34) AWG Bare Copper 0.019
b) Insulation 0.010" Wall, Nom. Polypropylene(PP) 0.039
(1) Color(s)
Pair Color Pair Color Pair Color
1WHITE/BLUE -
BLUE 2WHITE/ORANGE
- ORANGE
c) Pair 2/Cond Cabled Together
(1) Twists: Staggered Lays
2) Cable Assembly 2 Components Cabled
a) Twists: 6.9 Twists/foot (min)
c) Core Wrap Clear Mylar Tape, 25% Overlap, Min.
3) Shield: Alum/Mylar Tape, 25% Overlap, Min.
a) Foil Direction Foil Facing Out
b) Braid Tinned Copper,80% Coverage, Min.
4) Jacket 0.031" Wall, Nom., TPU (ZH) 0.236 (0.249 Max.)
a) Color(s) BLACK
b) Ripcord 1 End 810 Denier Nylon
c) Print
ALPHA WIRE-* P/N 74002 2PR 26 AWG
INDUSTRIAL ETHERNET SHIELDED
ANSI/TIA-568-C.2 CAT5E VERIFIED
CE ROHS (SEQ FOOTAGE)
* = Factory Code
Environmental
Properties
1) UL AWM/STYLE 20549 80°C / 300 VRMS
2) CSA International FT2
3) IEC EN 60811-2-1 Oil Resistance
EN 60754-2 Acid Gas Generation
4) Other ISO/IEC 11801 Category 5e Patch
Cable
ISO/IEC 24702
EN 50173-1
ANSI/TIA-568-C.2 Category 5e
5) CE: EU Low Voltage Directive 2014/35/EC
1) CE: EU Directive 2011/65/EU(RoHS2):
This product complies with European Directive 2011/65/EU (RoHS Directive)
of the European Parliament and of the Council of 8 June 2011and the
amending Directive 2015/863/EU of 4 June 2015 . No Exemptions are
required for RoHS Compliance on this item. Consult Alpha Wire's web site for
RoHS C of C.
2) REACH Regulation (EC 1907/2006):
This product does not contain Substances of Very High Concern (SVHC)
listed on the European Union's REACH candidate list in excess of 0.1%
mass of the item. For up-to-date information, please see Alpha's REACH
SVHC Declaration.
Physical & Mechanical Properties
1) Temperature Range -40 to 80°C
2) Bend Radius 5X Cable Diameter(static), 10X Cable Diameter(dynamic)
3) Pull Tension 9 Lbs, Maximum
Electrical Properties (For Engineering purposes only)
1) Max. operating voltage UL 300 VRMS
2) Dielectric strength cond. – cond. (2 sec.) 2.5kVdc
3) D.C. resistance conductor < 140 Ω/km
Other
4)Resistance unbalance < 2%
5) D.C. insulation resistance > 5000 MΩ.km
6)Mutual capacitance < 56 nF/km
7) Capacitance unbalance < 1600 pF/km
8) Velocity of propagation @ 4 – 100 MHz ≥ 60%
9) Skew @ 1 – 100 MHz ≤ 40 ns/100m
10) Propagation delay @ 1 – 100 MHz ≤ 534 + 36/√f ns/100m
11)Mean characteristic impedance (Zcm) @ 100 MHz 100 ± 15 Ω
Frequenc
y(MHz)
Max.
Attenuatio
n(dB/100
m)
Min.
NEXT(dB)
Min.
ELFEXT(d
B/100m)
Min.
RL(dB)
0.772 - 67 - 19.4
1 3.2 65.3 63.8 20
4 6.0 56.3 51.8 23
10 9.5 50.3 43.8 25
16 12.1 47.2 39.7 25
20 13.6 45.8 37.8 25
25 15.3 44.3 35.8 24.3
31.25 17.1 42.9 33.9 23.6
62.5 24.8 38.3 27.9 21.5
100 32 35.3 23.8 20.1
Packaging Flange x Traverse x Barrel (inches)
a) 500 FT 12 x 6 x 3.5 Continuous length
[Spool dimensions may vary slightly]
www.alphawire.com
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742)
Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication,
information and specifications described herein are subject to errors or omissions and to changes without notice, and
the listing of such information and specifications does not ensure product availability.
Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties,
whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential,
indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of
such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection
with the use, or inability to use, the information or specifications described herein.
ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical
information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and
subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges
and agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no
portion of this document may be copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In
the case of conflicting contractual provisions, this notice shall govern the status of this document. <br /><br />©2019
ALPHA WIRE - all rights reserved.
EU/China ROHS CERTIFICATE OF COMPLIANCE
To Whom It May Concern:
Alpha Wire Part Number: 74002
74002, RoHS-Compliant Commencing With 9/30/2013 Production
Note: all colors and put-ups
This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the
European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use
of certain hazardous substances used in the manufacture of electrical and electronic equipment. This certification extends to
amending Directive 2015/863/EU which expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The
reader is referred to these Directives for the specific definitions and extents of the Directives. No Exemptions are required for
RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS
“Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014.
Substance Maximum Control Value
Lead 0.1% by weight (1000 ppm)
Mercury 0.1% by weight (1000 ppm)
Cadmium 0.01% by weight (100 ppm)
Hexavalent Chromium 0.1% by weight (1000 ppm )
Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)
Polybrominated Diphenyl Ethers (PBDE) ,
Including Deca-BDE 0.1% by weight (1000 ppm)
Bis(2-ethylhexyl) phthalate (DEHP) 0.1% by weight (1000 ppm)
Butyl benzyl phthalate (BBP) 0.1% by weight (1000 ppm)
Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)
Diisobutyl phthalate (DIBP) 0.1% by weight (1000 ppm)
The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief
at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any
other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a
warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for
determining the applicability of legislation and regulations based on their individual usage of the product.
Authorized Signatory for the Alpha Wire:
Dave Watson, Director of Engineering & QA 3/4/2021
Alpha Wire
711 Lidgerwood Ave.
Elizabeth, NJ 07207
Tel: 1-908-925-8000