MSM 30 Metal Line Switches https://www.schurter.com /PG70 Metal Switch Medium Stroke, Switching Voltage up to 250 VAC Approvals and Compliances Description -Momentary action switch available in version: Standard (ST), with Lettering (LE), from diameter 19 mm with Point Illumination (PI) and with Ring Illumination (RI) -Single color or multicolor illumination -Choice from 7 colors for multicolor variants -Assembly method: clip micro-switch into the saddle, secure switch using mounting nut -Equipped with flat-pin plugs to permit fast connection Unique Selling Proposition -Attractive tactile feedback -High quality materials -Long life span -Single color or homogeneous multicolor illumination Characteristics -Housing and actuator material: high-quality stainless steel -Variety of design options regarding size, colour, illumination, connection or lettering -Switching voltage from 30 VDC to 250 VAC, switching current from 0.1 A to 10 A -optional withpoint or ringillumination -IP-Protection: IP 67 from front side to contact area, Micro-Switch is available in versions IP 40 or IP 67 -for use in harsh environments (see technical data) -IEC/UL 60950 References Alternative: double-pole switch: MSM DP 19;MSM DP 22;MSM DP 30 Alternative: Other diameter Weblinks html-datasheet, General Product Information, CAD-Drawings, Product News, Detailed request for product Switches 1 MSM 30 Metal Line Switches https://www.schurter.com /PG70 Technical Data Electrical Data Switching Function Number ofPoles Supply Voltage N.O., N.C., N.O./N.C. 1-pole 24 / 12 / 5VDCRingIllumination,Point Illuminationwithout series resistor,LED operating data are listed in separate table 4kVMSM ST / MSM LE Impulse Withstand Voltage (ESD) Micro Switch5 A / 125 VAC or 3 A / 250 VAC,IP40 Contact Material Ag Switching Voltage max.125 / 250VAC Switching Current max.5 / 3A Rated Switching Capacity 750W Lifetime 0.2millionactuationsat Rated Switching Capacity Contact Resistance <30m Insulation Resistance >100M Duration of Bounce <5ms Micro Switch 0,1 A / 30 VDC,IP40 Contact Material Au Switching Voltage max.30VDC Switching Current max.0.1A Rated Switching Capacity 3W Lifetime 0.2millionactuationsat Rated Switching Capacity Contact Resistance <50m Insulation Resistance >100M Duration of Bounce <5ms Micro Switch for Electrical Rating 10 A / 250 VAC (Protection Class IP40) Contact Material Ag Switching Voltage max.250VAC Switching Current max.10A Rated Switching Capacity 2500W Lifetime 0.05millionactuationsat Rated Switching Capacity Contact Resistance <30m Insulation Resistance >100M Duration of Bounce <5ms Micro Switch 5 A /250 VAC,IP67 Switching Voltage max.250VAC Switching Current max.5 Rated Switching Capacity 1250W Lifetime 0.05millionactuationsat Rated Switching Capacity Micro Switch0,1 A / 250 VAC,IP67 - on request Switching Voltage max.250VAC Switching Current max.0.1 Rated Switching Capacity 25W Lifetime 0.05millionactuationsat Rated Switching Capacity Micro Switch10 A / 250 VAC,IP67 - on request Switching Voltage max.250VAC Switching Current max.10A Rated Switching Capacity 2500W Lifetime 0.01millionactuationsat Rated Switching Capacity Mechanical Data Actuating Force Actuating Travel Lifetime Shock Protection Tightening Torque Plastic Nut Tightening Torque Stainless Steel Nut Climatical Data Operating Temperature Storage Temperature IP-Protection Salt Spray Test (acc. to DIN 50021-SS) Material Housings Actuator Light Conductor (Point Illumination) Illuminated Ring(Ring Illumination) Seal Ring Switcher Collet 4.5N 1.0mm,for mounting diameter 16, 19, 22 mm1.2mmfor mounting diameter 30 mm 1.5millionactuations IK 07for mounting diameter 19, 22, 30 mm,,IK 06for mounting diameter 16 mm max.2 Nm for thread M16, 4.5 Nm for M19, 3.5 Nm for M22, 8 Nm for M30 max.10 Nm for thread M16, 12 Nm for M19, 16 Nm for M22, 50 Nm for M30 -25to+85C -25to+85C IP 67Front Side Contact Area,IP 40Front Side mechanical,IP40 / IP 67Rear Side Contact Area optional 24 h / 48 h / 96 h Residence Time Stainless Steel Stainless Steel PC PA for single color variants PMMA for multicolor variants NBR70 PA Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals 2 Switches MSM 30 Metal Line Switches https://www.schurter.com /PG70 Approvals Approval Reference Type: MSM 30 Approval Logo Certification Body Description Low Voltage Directive 2014/35/EU compliant; following certificate numbers apply to micro switch VDE / ENEC Certificate Number (Omron): 40008425, 129246, 125256 UL UL / CSA File Number (Omron): E41515 VDE / ENECCertificate Number (Marquardt): 097550 UL UL / CSA File Number (Marquardt): E41791 KEMA KEMA / ENECFile Number (Cherry): 2089323.01 UL UL / CSA File Number (Cherry): E23301 CQC CQC File Number (Marquardt): CQC13005090991 Product standards Product standards that are referenced Organization Design Standard Description Designed according to DIN EN 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 1054 UL standard for safety special-use switches Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Details Initiator Description RoHS SCHURTER AG EU Directive RoHS 2011/65/EU REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] MSM 30 ST MSM 30 LE C B 0,50 20 NC NO COM 25 max. 5mm 10,20 33,10 2,80 28,80-0,05 0,50 20 NC NO COM 34 M30x1,5 36 max. 5mm 10,20 33,10 36 2,05 34 M30x1,5 2,05 C 2,80 B 25 Switches 3 MSM 30 Metal Line Switches https://www.schurter.com /PG70 MSM 30 RI Single color MSM 30 PI C C NC NO COM A 2,80 A NC NO COM B B 2 15,86 25 25 Verdrehsicherung anti-rotation protection 34 M30x1 2.05 MSM 30 RI Multicolor 33.1 Mutter nut 10.5 max. 5 O-Ring 0.5 2.8 20 2.8 0.5 36 NO COM Legend A = Illumination Area B = Actuating Area C = Width Across Flats D = Nut 0.20 0.20 Tolerance Range Actuator Tolerance Range The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. 4 Switches 25 Betatigungsflache actuator area Leuchtring illuminated Ring NC 2,05 max. 5mm 10,20 33,10 0,50 20 2,80 28,80-0,05 28,80-0,05 0,50 20 34 M30x1,5 36 max. 5mm 10,20 33,10 36 2,05 34 M30x1,5 MSM 30 Metal Line Switches https://www.schurter.com /PG70 Dimension MSM 30 LE / MSM 30 PI / MSM 30 RI optional MSM 30 ST / MSM 30 RI Drilling diagram Drilling diagram Assembly Instructions During assembly, the protruding bars of the holder should not be pressed together. I Housing II Flat Pin Terminal (Illumination) III Gasket IV Nut (Nut type see Dimensions) V Module Switching Contact Installation Instruction: 1.) Place the gasket accurately on the actuator housing. Then mount the actuator housing assembly into the panel. 2.) Tighten the screw nut according to the torque instructions. 3.) Clasp the module switching contact into the micro switch holder of the actuator housing. Installation information: 1.) The power supply and the configuration of the flat pin terminals have to be installed correctly for the illumination and micro switch function. 2.) Insulate the terminals as required. Fully insulated plug-in sleeves are recommended. 3.) Installation instructions according to VDE-standard DIN VDE 0100-100 or alternatively IEC 60354 standard. Switches 5 MSM 30 Metal Line Switches https://www.schurter.com /PG70 Diagrams MSM ST / MSM LE MSM PI COM NO NC MSM RI / 5 V COM NO NC D5 D6 D3 D4 D1 D2 MSM RI / 12 V D6 D5 D4 D3 D2 D1 Rv Rv COM COM NO NC MSM RI / 24 V Single color D4 D2 D5 D1 D6 Rv Rv COM Multicolor Singlecolor Active terminal R) Active terminal B) Multicolor Singlecolor Multicolor RGB Additive 2 x Multicolor RGB Additive 2 x x Blue Yellow x Magenta x x Cyan x x White Multicolor lighting options 6 Green x x Resulting Color Red x Multicolor RGB Additive 2 terminal R LED +pole red LED terminal G LED +pole green LED Switches R G B NO NC Active terminal G) terminal assignment with resistors for 24 VDC terminal B LED +pole blue LED x Multicolor Singlecolor Multicolor RGB Additive 3 NO NC MSM RI / 24 V Multicolor D3 Lighting type Rv Rv terminalLED -pole ground (GND) COM NO NC MSM 30 Metal Line Switches https://www.schurter.com /PG70 Point Illumination Operating Data Forward Current max. Forward Voltage at 10 mA Forward Voltage at 8 mA Forward Voltage at 20 mA Forward Voltage max. LED red 30 mA 1.9 VDC 3.0 VDC LED green 30 mA 2.1 VDC 3.0 VDC LED yellow 30 mA 2.1 VDC LED blue 20 mA 3.0 VDC 3.7 VDC 4.5 VDC LED white 30 mA 3.6 VDC LED red / green 25 mA 2.0 VDC / 2.2 VDC 4.0 VDC Attention: Switches are delivered without series resistor. Lettering The last three digits in the order number define the lettering: 000 No Lettering 001-074 Standard Lettering 101- Customized Lettering Lettering Colourof Laser Lettering Material Lettering Colour Stainless Steel black Filled letters 021 = U 041 = / Order Index Lettering Laser Marking 001 = A 061 = EIN 002 = B 022 = V 042 = 062 = AUS 003 = C 023 = W 043 = = 063 = AUF 004 = D 024 = X 044 = # 064 = AB 005 = E 025 = Y 045 = 065 = ON 006 = F 026 = Z 046 = 066 = OFF 007 = G 027 = 0 047 = 067 = UP 008 = H 028 = 1 048 = 068 = DOWN 009 = I 029 = 2 049 = 069 = HIGH 010 = J 030 = 3 050 = 070 = LOW 011 = K 031 = 4 051 = % 071 = ON/OFF 012 = L 032 = 5 052 = 072 = START 013 = M 033 = 6 053 = CTRL 073 = RESET 014 = N 034 = 7 054 = RETURN 074 = 015 = O 035 = 8 055 = SHIFT 075 = 016 = P 036 = 9 056 = LOCK 076 = 017 = Q 037 = + 057 = STOP 077 = 018 = R 038 = - 058 = ENTER 019 = S 039 = . 059 = BACK 020 = T 040 = x 060 = LINE Switches 7 MSM 30 Metal Line Switches https://www.schurter.com /PG70 All Variants Diameter Switching Current Switching Voltage Illumination, LED Housing Material, Torsion Protection Actuator Material Config. Code Order Number [mm] [A] [VAC/ VDC] 30 100mA 30VDC non-illuminated Stainless Steel,no Stainless Steel MSM30ST 1241.6661.1110000 30 30 5 / 3A 125 / 250VAC non-illuminated Stainless Steel,no Stainless Steel MSM30ST 1241.6661.1120000 10A 250VAC non-illuminated Stainless Steel,no Stainless Steel MSM30ST 1241.6661.1130000 Stainless Steel 30 0.1A 250VAC non-illuminated Stainless Steel,no MSM30ST 1241.6661.1170000 30 100mA 30VDC Point Illumination, red Stainless Steel,yes Stainless Steel MSM30PIred 1241.6663.1111000 30 100mA 30VDC Point Illumination, blue Stainless Steel,yes Stainless Steel MSM30PIblue 1241.6663.1114000 30 5 / 3A 125 / 250VAC Point Illumination, red Stainless Steel,yes Stainless Steel MSM30PIred 1241.6663.1121000 30 5 / 3A 125 / 250VAC Point Illumination, green Stainless Steel,yes Stainless Steel MSM30PIgreen 1241.6663.1122000 30 5 / 3A 125 / 250VAC Point Illumination, blue Stainless Steel,yes Stainless Steel MSM30PIblue 1241.6663.1124000 30 5 / 3A 125 / 250VAC Point Illumination, white Stainless Steel,yes Stainless Steel MSM30PIwhite 1241.6663.1125000 30 10A 250VAC Point Illumination, green Stainless Steel,yes Stainless Steel MSM30PIgreen 1241.6663.1132000 30 5 / 3A 125 / 250VAC Point Illumination, red Alu red,yes MSM30PIred 1241.6663.3121 30 100mA 30VDC Ring Illumination, red, 24 VDC Stainless Steel,yes Stainless Steel Alu red MSM30RIred 1241.6664.1111000 30 100mA 30VDC Ring Illumination, green, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIgreen 1241.6664.1112000 30 100mA 30VDC Ring Illumination, yellow, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIyellow 1241.6664.1113000 30 100mA 30VDC Ring Illumination, blue, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIblue 1241.6664.1114000 30 5 / 3A 125 / 250VAC Ring Illumination, red, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIred 1241.6664.1121000 30 5 / 3A 125 / 250VAC Ring Illumination, green, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIgreen 1241.6664.1122000 30 5 / 3A 125 / 250VAC Ring Illumination, yellow, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIyellow 1241.6664.1123000 30 5 / 3A 125 / 250VAC Ring Illumination, blue, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIblue 1241.6664.1124000 30 5 / 3A 125 / 250VAC Ring Illumination, white, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIwhite 1241.6664.1125000 30 10A 250VAC Ring Illumination, green, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIgreen 1241.6664.1132000 30 10A 250VAC Ring Illumination, blue, 24 VDC Stainless Steel,yes Stainless Steel MSM30RIblue 1241.6664.1134000 30 100mA 30VDC Ring Illumination, multicolor, 24 VDC Stainless Steel,yes Stainless Steel MSM30RImulticolor 3-102-785 30 10A 250VAC Ring Illumination, multicolor, 24 VDC Stainless Steel,yes Stainless Steel MSM30RImulticolor 3-102-787 IP-Protection: IP 67 from front side to contact area, Micro-Switch is available in versions IP 40 or IP 67, see Technical Data Micro-Switch Customer-specific versions available on request. Special materials for use in salt and chlorinated environment on request. The nut with gasket and micro switch are enclosed in the box. Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 8 10in box with insertor packed in air cushion bags Switches MSM 30 Metal Line Switches 24.11.2017 https://www.schurter.com /PG70 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Switches 9