Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series FEATURES * LOW IMPEDANCE & ESR AT HIGH FREQUENCY RoHS * HIGH RIPPLE CURRENT Compliant * REPLACES MULTIPLE TANTALUM CHIPS IN POWER SUPPLIES includes all homogeneous materials * FITS EIA (7343) "D" LAND PATTERNS * Pb-FREE (GOLD TERMINATION PLATING) *See Part Number System for Details * COMPATIBLE WITH +260C* REFLOW SOLDERING CHARACTERISTICS Rated Working Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current (A) After 5 Minutes (+20C) 2.0 ~ 10VDC 22 ~ 470F -55 ~ +105C 20% (M) Surge Voltage (1000 cycles, 30 sec. on, 5 min. 30 sec. off, 1K) Working Voltage (Vdc) 2.0 2.5 4.0 6.3 8.0 10 Surge Voltage (Vdc) 2.6 3.2 5.2 8.2 7.8** 10.4 11.5 <0.04CV D1, D6 D5, D7, D8 Max. Tan , 120Hz, +20C High Temperature Load Life 2,000 Hours @ 105C at Rated Working Voltage after 2x recommended reflow profile Capacitance Change Moisture Resistance 500 Hours @ +60C at 90 ~ 95% RH and No Voltage Applied after 2x recommended reflow profile (JEDEC MSL-3) Capacitance Change Tan Leakage Current Tan Leakage Current STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+260C Reflow) NPC101M2D5ZATRF NPC101M2D1UATRF NPC101M2D1ZATRF NPC101M2D6XATRF NPC101M2D6ZATRF NPC121M2D6ZATRF NPC151M2D5ZATRF NPC151M2D1UATRF NPC151M2D6ZATRF NPC181M2D5ZATRF NPC181M2D6ZATRF NPC221M2D5ZATRF NPC221M2D6YATRF NPC221M2D6ZATRF NPC221M2D7XATRF NPC271M2D6ZATRF* NPC271M2D6YATRF* NPC271M2D8YATRF NPC331M2D6ZATRF* NPC331M2D6YATRF* NPC331M2D6UATRF* NPC331M2D8YATRF NPC391M2D8YATRF NPC471M2D6UATRF*** NPC471M2D8YATRF NPC820M2.5D1ZATRF NPC820M2.5D6XATRF NPC820M2.5D6ZATRF NPC101M2.5D5ZATRF NPC101M2.5D1UATRF 1 WV Cap. Max. LC (Vdc) (F) (A) 2 2.5 <0.05 <0.1 Within 20% of initial measured value **/***Within 30% of initial measured value D7, D8 Less than 150% of specified max. value D1, D5, D6 Less than 200% of specified max. value Less than specified max. value Within -20%/+40% of initial measured value D5, */**/***Within -20%/+60% of initial measured value D7, D8 Less than 150% of specified max. value D1, D5, D6 Less than 200% of specified max. value Less than 300% of specified max. value */**/***Applies to values with asterisk in column "NIC Part Number" Max. ESR Height +20C @ <45C 45C< T <85C 85C< T <105C 100KHz () H 0.1 100 8.0 0.10 6,300 4,400 2,700 0.009 1.1 100 8.0 0.05 8,100 5,600 3,000 0.005 1.4 100 8.0 0.05 6,300 4,400 3,000 0.009 1.4 100 8.0 0.05 5,400 3,700 3,000 0.013 1.9 100 8.0 0.05 6,300 4,400 3,000 0.009 1.9 120 9.6 0.05 6,300 4,400 3,000 0.009 1.9 150 12.0 0.10 6,300 4,400 2,700 0.009 1.1 150 12.0 0.05 8,100 5,600 3,000 0.005 1.4 150 12.0 0.05 6,300 4,400 3,000 0.009 1.9 180 14.4 0.10 6,300 4,400 2,700 0.009 1.1 180 14.4 0.05 6,300 4,400 3,000 0.009 1.9 220 17.6 0.10 6,300 4,400 2,700 0.009 1.1 220 17.6 0.05 7,000 4,900 3,000 0.007 1.9 220 17.6 0.05 6,300 4,400 3,000 0.009 1.9 220 17.6 0.10 6,000 4,200 3,500 0.010 2.7 270 21.6 0.05 6,300 4,400 3,000 0.009 1.9**** 270 21.6 0.05 7,500 5,200 3,500 0.006 1.9**** 270 21.6 0.10 7,000 4,900 3,500 0.007 2.9 330 26.4 0.05 6,300 4,400 3,000 0.009 1.9**** 330 26.4 0.05 7,500 5,200 3,500 0.006 1.9**** 330 26.5 0.05 8,500 5,900 3,500 0.0045 1.9**** 330 26.4 0.10 7,000 4,900 3,500 0.007 2.9 390 31.2 0.10 7,000 4,900 3,500 0.007 2.9 470 37.6 0.05 8,500 5,900 3,500 0.0045 1.9**** 470 37.6 0.10 7,000 4,900 3,500 0.007 2.9 82 8.2 0.05 6,300 4,400 3,000 0.009 1.4 82 8.2 0.05 5,400 3,700 3,000 0.013 1.9 82 8.2 0.05 6,300 4,400 3,000 0.009 1.9 100 10.0 0.10 6,300 4,400 2,700 0.009 1.1 100 10.0 0.05 8,100 5,600 3,000 0.005 1.4 */***See note regarding capacitance change in characteristics table (Endurance & Moisture Resistance). ****height dimension tolerance 0.2mm NIC COMPONENTS CORP. www.niccomp.com Tan Max. Ripple Current (mArms)@ 100KHz www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+260C Reflow) NPC101M2.5D6ZATRF NPC121M2.5D1UATRF NPC121M2.5D6ZATRF NPC151M2.5D5ZATRF NPC151M2.5D6ZATRF NPC181M2.5D5ZATRF NPC181M2.5D6ZATRF NPC181M2.5D7XATRF NPC221M2.5D6YATRF* NPC221M2.5D6ZATRF* NPC221M2.5D8YATRF NPC271M2.5D6ZATRF* NPC271M2.5D6YATRF* NPC271M2.5D8YATRF NPC331M2.5D6YATRF* NPC331M2.5D8YATRF NPC391M2.5D6YATRF* NPC391M2.5D8ZATRF NPC471M2.5D8YATRF NPC471M2.5D6UATRF*** NPC680M4D5XATRF NPC680M4D1ZATRF NPC680M4D6XATRF NPC680M4D6ZATRF NPC820M4D6XATRF NPC101M4D6XATRF NPC121M4D6XATRF NPC151M4D6XATRF NPC151M4D7XATRF NPC181M4D6ZATRF* NPC181M4D8ZATRF NPC221M4D6ZATRF* NPC221M4D8ZATRF NPC271M4D8ZATRF NPC331M4D8ZATRF NPC471M4D8ZATRF NPC330M6.3D6XATRF NPC470M6.3D5XATRF NPC470M6.3D1XATRF NPC470M6.3D6XATRF NPC470M6.3D6ZATRF NPC560M6.3D6XATRF NPC680M6.3D6XATRF NPC820M6.3D6XATRF NPC101M6.3D6XATRF NPC101M6.3D7XATRF NPC121M6.3D6ZATRF* NPC121M6.3D8ZATRF NPC151M6.3D6ZATRF* NPC151M6.3D8ZATRF NPC181M6.3D8ZATRF NPC221M6.3D8ZATRF 2 WV Cap. Max. LC (Vdc) (F) (A) 2.5 4.0 6.3 Tan Max. Ripple Current (mArms)@ 100KHz <45C 45C< T <85C Max. ESR +20C @ 85C< T <105C 100KHz () Height H 0.1 100 10.0 0.05 6,300 4,400 3,000 0.009 1.9 120 12.0 0.05 8,100 5,600 3,000 0.005 1.4 120 12.0 0.05 6,300 4,400 3,000 0.009 1.9 150 15.0 0.10 6,300 4,400 2,700 0.009 1.1 150 15.0 0.05 6,300 4,400 3,000 0.009 1.9 180 18.0 0.10 6,300 4,400 2,700 0.009 1.1 180 18.0 0.05 6,300 4,400 3,000 0.009 1.9 180 18.0 0.10 6,000 4,200 3,500 0.010 2.7 220 22.0 0.05 7,500 5,200 3,500 0.006 1.9**** 220 22.0 0.05 6,300 4,400 3,000 0.009 1.9**** 220 22.0 0.10 7,000 4,900 3,500 0.007 2.9 270 27.0 0.05 6,300 4,400 3,000 0.009 1.9**** 270 27.0 0.05 7,500 5,200 3,500 0.006 1.9**** 270 27.0 0.10 7,000 4,900 3,500 0.007 2.9 330 33.0 0.05 7,500 5,200 3,500 0.006 1.9**** 330 33.0 0.10 7,000 4,900 3,500 0.007 2.9 390 39.0 0.05 7,500 5,200 3,500 0.006 1.9**** 390 39.0 0.10 6,300 4,400 3,500 0.009 2.9 470 47.0 0.10 7,000 4,900 3,500 0.007 2.9 470 47.0 0.10 8,500 5,900 3,500 0.0045 1.9**** 68 10.9 0.10 5,100 3,500 2,100 0.015 1.1 68 10.9 0.05 6,300 4,400 3,000 0.009 1.4 68 10.9 0.05 5,400 3,700 3,000 0.013 1.9 68 10.9 0.05 6,300 4,400 3,000 0.009 1.9 82 13.1 0.05 6,000 4,200 3,000 0.010 1.9 100 16.0 0.05 6,000 4,200 3,000 0.010 1.9 120 19.2 0.05 6,000 4,200 3,000 0.010 1.9 150 24.0 0.05 6,000 4,200 3,000 0.010 1.9 150 24.0 0.10 6,000 4,200 3,500 0.010 2.7 180 28.8 0.05 6,300 4,400 3,000 0.009 1.9**** 180 28.8 0.10 6,300 4,400 3,500 0.009 2.9 220 35.2 0.05 6,300 4,400 3,000 0.009 1.9**** 220 35.2 0.10 6,300 4,400 3,500 0.009 2.9 270 43.2 0.10 6,300 4,400 3,500 0.009 2.9 330 52.8 0.10 6,300 4,400 3,500 0.009 2.9 470 75.2 0..10 6,300 4,400 3,500 0.009 2.9 33 8.3 0.05 5,100 3,500 3,000 0.015 1.9 47 11.8 0.10 5,100 3,500 2,100 0.015 1.1 47 11.8 0.05 6,000 4,200 3,000 0.010 1.4 47 11.8 0.05 5,400 3,700 3,000 0.013 1.9 47 11.8 0.05 6,300 4,400 3,000 0.009 1.9 56 14.1 0.05 6,000 4,400 3,000 0.010 1.9 68 17.1 0.05 6,000 4,400 3,000 0.010 1.9 82 20.7 0.05 6,000 4,200 3,000 0.010 1.9 100 25.2 0.05 6,000 4,200 3,000 0.010 1.9 100 25.2 0.10 6,000 4,200 3,500 0.010 2.7 120 30.2 0.05 6,300 4,400 3,000 0.009 1.9**** 120 30.2 0.10 6,300 4,400 3,500 0.009 2.9 150 37.8 0.05 6,300 4,400 3,000 0.009 1.9**** 150 37.8 0.10 6,300 4,400 3,500 0.009 2.9 180 45.4 0.10 6,300 4,400 3,500 0.009 2.9 220 55.4 0.10 6,300 4,400 3,500 0.009 2.9 */***See note regarding capacitance change in characteristics table (Endurance & Moisture Resistance). ****height dimension tolerance 0.2mm NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+260C Reflow) NPC220M8D6ATRF NPC330M8D6ATRF NPC330M8D7XATRF NPC470M8D6ATRF NPC680M8D7ATRF NPC101M8D7ATRF NPC101M8D7XATRSF NPC220M10D6ATRF NPC470M10D6ATRF* WV Cap. Max. LC (Vdc) (F) (A) 22 33 33 47 68 100 100 22 47 7.0 10.6 10.6 15.1 21.8 32.0 32.0 8.8 18.8 8 10 Tan 0.05 0.05 0.10 0.05 0.10 0.10 0.10 0.10 0.10 Max. Ripple Current (mArms)@ 100KHz <45C 4,700 4,700 5,400 4,700 4,700 4,700 5,600 3,700 4,000 NPC101M8D7XATRSF 1,000 hour load life 45C< T <85C 85C< T <105C Max. ESR +20C @ 100KHz () Height H 0.1 3,200 2,500 0.018 1.9 3,200 2,500 0.018 1.9 3,700 3,000 0.013 2.7 3,200 2,500 0.018 1.9 3,200 2,500 0.018 2.7 3,200 2,500 0.018 2.7 3,900 3,300 0.012 2.7 2,500 1,600 0.030 1.9 2,800 1,800 0.025 1.9**** */***See note regarding capacitance change in characteristics table (Endurance & Moisture Resistance). ****height dimension tolerance 0.2mm PART NUMBERING SYSTEM NPC 101 M 6.3 D7 X A TR 500 F Series RoHS Compliant Optional 500 piece reel qty Tape & Reel Packaging Denotes +260C Peak Reflow Performance Code (see Standard Products & Specifications Tables) Case Size Working Voltage (Vdc) Tolerance Code M=20%, K=10% Capacitance Code in F, first 2 digits are significant, third digits no. of zeros DIMENSIONS (mm) Case Code D1 D5 D6 D7 D8 L 0.2 W 0.2 7.3 4.3 H 0.1 1.4 1.1 1.9* 2.7 2.9 W1 0.1 S 0.2 2.4 1.2 TERMINATION MATERIAL: Cu: 100 8m *D6 - See Standard Products & Specifications Tables for height tolerance. Ni: 0.5 ~ 2.0m Pd: 0.02 ~ 0.07m Au: 0.003 ~ 0.014m H S W1 L W Anode Polarity Indicator Capacitance Value Lot Number 220 d58 + W1 Voltage Code 3 Au: 0.003 ~ 0.014m Pd: 0.02 ~ 0.07m Ni: 0.5 ~ 2.0m NIC COMPONENTS CORP. www.niccomp.com VOLTAGE CODES Voltage 2.0VDC 2.5VDC 4.0VDC 6.3VDC 8.0VDC 10VDC www.lowESR.com Code d e g j k A www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Solid Polymer Aluminum Electrolytic Capacitors RECOMMENDED LAND PATTERNS (mm) a 2.4 b 2.9 RECOMMENDED REFLOW SOLDERING PROFILE c 3.7 COMPONENT SURFACE TEMP. (oC) Case Code D1, D5, D6, D7, D8 B C A NPC Series A Peak Temperature 260C Max. for 10 sec. 260 217 NATURAL COOLING 200 Time Above 217C 90 sec. max. 160 Pre-Heat 160oC ~ 180C 100 120 Sec. Max. Reflow Times: 2 times max. 50 TIME (SECONDS) APPLICATION NOTES: 1. NPC Series cannot be used in coupling, time-constant or other circuits that are greatly affected by leakage current. 2. NPC parts are polarized so be sure to verify component orientation when mounting components. 3. Do not apply over voltage exceeding the rated voltage. 4. Do not apply ripple current over the specified maximum ripple current rating. NOTES ON REFLOW SOLDERING: 1. SAC alloy (+217C) reflow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your reflow soldering profile review them with NIC to insure compatible [tpmg@niccomp.com] REEL TAPE DIMENSIONS (mm) Case Reel A 2.0 B 1.0 C 0.2 W 1.0 t 0.5 Code Quantity D1, D5, D6 3,500 330 80 13 13.5 2.0 500* D7, D8 2,000 *See part number system for details on designating reel quantity TAPE DIMENSIONS (mm) Case A 0.1 B 0.2 Code D1 D5 D6 4.50 7.70 D7 D8 D 0.05 12.0 E 0.1 5.5 J F 0.1 1.75 G 0.05 8.0 2.0 H 0.1 4.0 J -0/+0.1 K 0.1 t 0.05 1.5 1.6 1.5 2.3 2.9 3.1 0.3 G H E t C 0.3 + + 220 d58 + 220 d58 A B 220 d58 K B C D C F W Anode A t PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC's technical support personnel: tpmg@niccomp.com 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com