V0.5-3(LF) - JST - Datasheet.Live

1NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

Surface Mount Solid Polymer Aluminum

Electrolytic Capacitors NPC Series

CHARACTERISTICS

STANDARD PRODUCTS AND SPECIFICATIONS

• LOW IMPEDANCE & ESR AT HIGH FREQUENCY

• HIGH RIPPLE CURRENT

• REPLACES MULTIPLE TANTALUM CHIPS IN POWER SUPPLIES

• FITS EIA (7343) “D” LAND PATTERNS

• Pb-FREE (GOLD TERMINATION PLATING)

• COMPATIBLE WITH +260°C* REFLOW SOLDERING

Rated Working Range 2.0 ~ 10VDC

Rated Capacitance Range 22 ~ 470µF

Operating Temperature Range -55 ~ +105°C

Capacitance Tolerance ± 20% (M)

Max. Leakage Current (µA)

After 5 Minutes (+20°C) <0.04CV

Surge Voltage

(1000 cycles, 30 sec. on,

5 min. 30 sec. off, 1KΩ)

Working Voltage (Vdc) 2.0 2.5 4.0 6.3 8.0 10

Surge Voltage (Vdc) 2.6 3.2 5.2 8.2

7.8** 10.4 11.5

Max. Tan δ, 120Hz, +20°C D1, D6 <0.05

D5, D7, D8 <0.1

High Temperature Load Life

2,000 Hours @ 105°C

at Rated Working Voltage

after 2x recommended reow prole

Capacitance Change Within ±20% of initial measured value

**/***Within ±30% of initial measured value

Tan δD7, D8 Less than 150% of specied max. value

D1, D5, D6 Less than 200% of specied max. value

Leakage Current Less than specied max. value

Moisture Resistance

500 Hours @ +60°C at 90 ~ 95% RH

and No Voltage Applied

after 2x recommended reow prole

(JEDEC MSL-3)

Capacitance Change Within -20%/+40% of initial measured value

D5, */**/***Within -20%/+60% of initial measured value

Tan δD7, D8 Less than 150% of specied max. value

D1, D5, D6 Less than 200% of specied max. value

Leakage Current Less than 300% of specied max. value

NIC Part Number

(+260°C Reow)

WV Cap. Max. LC

Tan δMax. Ripple Current (mArms)@ 100KHz Max. ESR

+20°C @

100KHz (Ω)

Height

H ± 0.1

(Vdc) (µF) (µA) <45°C 45°C< T <85°C 85°C< T <105°C

NPC101M2D5ZATRF

100 8.0 0.10 6,300 4,400 2,700 0.009 1.1

NPC101M2D1UATRF 100 8.0 0.05 8,100 5,600 3,000 0.005 1.4

NPC101M2D1ZATRF 100 8.0 0.05 6,300 4,400 3,000 0.009 1.4

NPC101M2D6XATRF 100 8.0 0.05 5,400 3,700 3,000 0.013 1.9

NPC101M2D6ZATRF 100 8.0 0.05 6,300 4,400 3,000 0.009 1.9

NPC121M2D6ZATRF 120 9.6 0.05 6,300 4,400 3,000 0.009 1.9

NPC151M2D5ZATRF 150 12.0 0.10 6,300 4,400 2,700 0.009 1.1

NPC151M2D1UATRF 150 12.0 0.05 8,100 5,600 3,000 0.005 1.4

NPC151M2D6ZATRF 150 12.0 0.05 6,300 4,400 3,000 0.009 1.9

NPC181M2D5ZATRF 180 14.4 0.10 6,300 4,400 2,700 0.009 1.1

NPC181M2D6ZATRF 180 14.4 0.05 6,300 4,400 3,000 0.009 1.9

NPC221M2D5ZATRF 220 17.6 0.10 6,300 4,400 2,700 0.009 1.1

NPC221M2D6YATRF 220 17.6 0.05 7,000 4,900 3,000 0.007 1.9

NPC221M2D6ZATRF 220 17.6 0.05 6,300 4,400 3,000 0.009 1.9

NPC221M2D7XATRF 220 17.6 0.10 6,000 4,200 3,500 0.010 2.7

NPC271M2D6ZATRF* 270 21.6 0.05 6,300 4,400 3,000 0.009 1.9****

NPC271M2D6YATRF* 270 21.6 0.05 7,500 5,200 3,500 0.006 1.9****

NPC271M2D8YATRF 270 21.6 0.10 7,000 4,900 3,500 0.007 2.9

NPC331M2D6ZATRF* 330 26.4 0.05 6,300 4,400 3,000 0.009 1.9****

NPC331M2D6YATRF* 330 26.4 0.05 7,500 5,200 3,500 0.006 1.9****

NPC331M2D6UATRF* 330 26.5 0.05 8,500 5,900 3,500 0.0045 1.9****

NPC331M2D8YATRF 330 26.4 0.10 7,000 4,900 3,500 0.007 2.9

NPC391M2D8YATRF 390 31.2 0.10 7,000 4,900 3,500 0.007 2.9

NPC471M2D6UATRF*** 470 37.6 0.05 8,500 5,900 3,500 0.0045 1.9****

NPC471M2D8YATRF 470 37.6 0.10 7,000 4,900 3,500 0.007 2.9

NPC820M2.5D1ZATRF

2.5

82 8.2 0.05 6,300 4,400 3,000 0.009 1.4

NPC820M2.5D6XATRF 82 8.2 0.05 5,400 3,700 3,000 0.013 1.9

NPC820M2.5D6ZATRF 82 8.2 0.05 6,300 4,400 3,000 0.009 1.9

NPC101M2.5D5ZATRF 100 10.0 0.10 6,300 4,400 2,700 0.009 1.1

NPC101M2.5D1UATRF 100 10.0 0.05 8,100 5,600 3,000 0.005 1.4

FEATURES

*See Part Number System for Details

RoHS

Compliant

includes all homogeneous materials

*/***See note regarding capacitance change in characteristics table (Endurance & Moisture Resistance).

****height dimension tolerance ±0.2mm

*/**/***Applies to values with asterisk in column "NIC Part Number"

2NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

NIC Part Number

(+260°C Reow)

WV Cap. Max. LC

Tan δ

Max. Ripple Current (mArms)@ 100KHz Max. ESR

+20°C @

100KHz (Ω)

Height

H ± 0.1

(Vdc) (µF) (µA) <45°C 45°C< T <85°C 85°C< T <105°C

NPC101M2.5D6ZATRF

2.5

100 10.0 0.05 6,300 4,400 3,000 0.009 1.9

NPC121M2.5D1UATRF 120 12.0 0.05 8,100 5,600 3,000 0.005 1.4

NPC121M2.5D6ZATRF 120 12.0 0.05 6,300 4,400 3,000 0.009 1.9

NPC151M2.5D5ZATRF 150 15.0 0.10 6,300 4,400 2,700 0.009 1.1

NPC151M2.5D6ZATRF 150 15.0 0.05 6,300 4,400 3,000 0.009 1.9

NPC181M2.5D5ZATRF 180 18.0 0.10 6,300 4,400 2,700 0.009 1.1

NPC181M2.5D6ZATRF 180 18.0 0.05 6,300 4,400 3,000 0.009 1.9

NPC181M2.5D7XATRF 180 18.0 0.10 6,000 4,200 3,500 0.010 2.7

NPC221M2.5D6YATRF* 220 22.0 0.05 7,500 5,200 3,500 0.006 1.9****

NPC221M2.5D6ZATRF* 220 22.0 0.05 6,300 4,400 3,000 0.009 1.9****

NPC221M2.5D8YATRF 220 22.0 0.10 7,000 4,900 3,500 0.007 2.9

NPC271M2.5D6ZATRF* 270 27.0 0.05 6,300 4,400 3,000 0.009 1.9****

NPC271M2.5D6YATRF* 270 27.0 0.05 7,500 5,200 3,500 0.006 1.9****

NPC271M2.5D8YATRF 270 27.0 0.10 7,000 4,900 3,500 0.007 2.9

NPC331M2.5D6YATRF* 330 33.0 0.05 7,500 5,200 3,500 0.006 1.9****

NPC331M2.5D8YATRF 330 33.0 0.10 7,000 4,900 3,500 0.007 2.9

NPC391M2.5D6YATRF* 390 39.0 0.05 7,500 5,200 3,500 0.006 1.9****

NPC391M2.5D8ZATRF 390 39.0 0.10 6,300 4,400 3,500 0.009 2.9

NPC471M2.5D8YATRF 470 47.0 0.10 7,000 4,900 3,500 0.007 2.9

NPC471M2.5D6UATRF*** 470 47.0 0.10 8,500 5,900 3,500 0.0045 1.9****

NPC680M4D5XATRF

4.0

68 10.9 0.10 5,100 3,500 2,100 0.015 1.1

NPC680M4D1ZATRF 68 10.9 0.05 6,300 4,400 3,000 0.009 1.4

NPC680M4D6XATRF 68 10.9 0.05 5,400 3,700 3,000 0.013 1.9

NPC680M4D6ZATRF 68 10.9 0.05 6,300 4,400 3,000 0.009 1.9

NPC820M4D6XATRF 82 13.1 0.05 6,000 4,200 3,000 0.010 1.9

NPC101M4D6XATRF 100 16.0 0.05 6,000 4,200 3,000 0.010 1.9

NPC121M4D6XATRF 120 19.2 0.05 6,000 4,200 3,000 0.010 1.9

NPC151M4D6XATRF 150 24.0 0.05 6,000 4,200 3,000 0.010 1.9

NPC151M4D7XATRF 150 24.0 0.10 6,000 4,200 3,500 0.010 2.7

NPC181M4D6ZATRF* 180 28.8 0.05 6,300 4,400 3,000 0.009 1.9****

NPC181M4D8ZATRF 180 28.8 0.10 6,300 4,400 3,500 0.009 2.9

NPC221M4D6ZATRF* 220 35.2 0.05 6,300 4,400 3,000 0.009 1.9****

NPC221M4D8ZATRF 220 35.2 0.10 6,300 4,400 3,500 0.009 2.9

NPC271M4D8ZATRF 270 43.2 0.10 6,300 4,400 3,500 0.009 2.9

NPC331M4D8ZATRF 330 52.8 0.10 6,300 4,400 3,500 0.009 2.9

NPC471M4D8ZATRF 470 75.2 0..10 6,300 4,400 3,500 0.009 2.9

NPC330M6.3D6XATRF

6.3

33 8.3 0.05 5,100 3,500 3,000 0.015 1.9

NPC470M6.3D5XATRF 47 11.8 0.10 5,100 3,500 2,100 0.015 1.1

NPC470M6.3D1XATRF 47 11.8 0.05 6,000 4,200 3,000 0.010 1.4

NPC470M6.3D6XATRF 47 11.8 0.05 5,400 3,700 3,000 0.013 1.9

NPC470M6.3D6ZATRF 47 11.8 0.05 6,300 4,400 3,000 0.009 1.9

NPC560M6.3D6XATRF 56 14.1 0.05 6,000 4,400 3,000 0.010 1.9

NPC680M6.3D6XATRF 68 17.1 0.05 6,000 4,400 3,000 0.010 1.9

NPC820M6.3D6XATRF 82 20.7 0.05 6,000 4,200 3,000 0.010 1.9

NPC101M6.3D6XATRF 100 25.2 0.05 6,000 4,200 3,000 0.010 1.9

NPC101M6.3D7XATRF 100 25.2 0.10 6,000 4,200 3,500 0.010 2.7

NPC121M6.3D6ZATRF* 120 30.2 0.05 6,300 4,400 3,000 0.009 1.9****

NPC121M6.3D8ZATRF 120 30.2 0.10 6,300 4,400 3,500 0.009 2.9

NPC151M6.3D6ZATRF* 150 37.8 0.05 6,300 4,400 3,000 0.009 1.9****

NPC151M6.3D8ZATRF 150 37.8 0.10 6,300 4,400 3,500 0.009 2.9

NPC181M6.3D8ZATRF 180 45.4 0.10 6,300 4,400 3,500 0.009 2.9

NPC221M6.3D8ZATRF 220 55.4 0.10 6,300 4,400 3,500 0.009 2.9

Surface Mount Solid Polymer Aluminum

Electrolytic Capacitors NPC Series

STANDARD PRODUCTS AND SPECIFICATIONS

*/***See note regarding capacitance change in characteristics table (Endurance & Moisture Resistance).

****height dimension tolerance ±0.2mm

3NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

Surface Mount Solid Polymer Aluminum

Electrolytic Capacitors NPC Series

TERMINATION MATERIAL: Au: 0.003 ~ 0.014µm

Pd: 0.02 ~ 0.07µm

Ni: 0.5 ~ 2.0µm

Pd: 0.02 ~ 0.07µm

Au: 0.003 ~ 0.014µm

Cu: 100 ±8µm

DIMENSIONS (mm)

VOLTAGE CODES

Voltage Code

2.0VDC d

2.5VDC e

4.0VDC g

6.3VDC j

8.0VDC k

10VDC A

Case Code L ±0.2 W ±0.2 H ±0.1 W1 ±0.1 S ±0.2

7.3 4.3

1.4

2.4 1.2

D5 1.1

D6 1.9*

D7 2.7

D8 2.9

220

d58

Anode Polarity

Indicator

Voltage Code

Capacitance Value

Lot Number

PART NUMBERING SYSTEM

NPC 101 M 6.3 D7 X A TR 500 F

RoHS Compliant

Optional 500 piece reel qty

Tape & Reel Packaging

Denotes +260°C Peak Reow

Performance Code (see Standard Products & Specications Tables)

Case Size

Working Voltage (Vdc)

Tolerance Code M=20%, K=10%

Capacitance Code in µF, rst 2 digits are

signicant, third digits no. of zeros

Series

*D6 - See Standard Products & Specications Tables

for height tolerance.

NIC Part Number

(+260°C Reow)

WV Cap. Max. LC

Tan δ

Max. Ripple Current (mArms)@ 100KHz Max. ESR

+20°C @

100KHz (Ω)

Height

H ± 0.1

(Vdc) (µF) (µA) <45°C 45°C< T <85°C 85°C< T <105°C

NPC220M8D6ATRF

22 7.0 0.05 4,700 3,200 2,500 0.018 1.9

NPC330M8D6ATRF 33 10.6 0.05 4,700 3,200 2,500 0.018 1.9

NPC330M8D7XATRF 33 10.6 0.10 5,400 3,700 3,000 0.013 2.7

NPC470M8D6ATRF 47 15.1 0.05 4,700 3,200 2,500 0.018 1.9

NPC680M8D7ATRF 68 21.8 0.10 4,700 3,200 2,500 0.018 2.7

NPC101M8D7ATRF 100 32.0 0.10 4,700 3,200 2,500 0.018 2.7

NPC101M8D7XATRSF 100 32.0 0.10 5,600 3,900 3,300 0.012 2.7

NPC220M10D6ATRF 10 22 8.8 0.10 3,700 2,500 1,600 0.030 1.9

NPC470M10D6ATRF* 47 18.8 0.10 4,000 2,800 1,800 0.025 1.9****

STANDARD PRODUCTS AND SPECIFICATIONS

NPC101M8D7XATRSF 1,000 hour load life */***See note regarding capacitance change in characteristics table

(Endurance & Moisture Resistance).

****height dimension tolerance ±0.2mm

4NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

TAPE DIMENSIONS (mm)

REEL TAPE DIMENSIONS (mm)

Case

Code A ±0.1 B ±0.2 C ±0.3 D ±0.05 E ±0.1 F ±0.1 G ±0.05 H ±0.1 J -0/+0.1 K ±0.1 t ±0.05

4.50 7.70 12.0 5.5 1.75 8.0 2.0 4.0 1.5

1.6

0.3

D5 1.5

D6 2.3

D7 2.9

D8 3.1

Case

Code A ±2.0 B ±1.0 C ±0.2 W ±1.0 t ±0.5 Reel

Quantity

D1, D5, D6 330 80 13 13.5 2.0 3,500 500*

D7, D8 2,000

*See part number system for details on designating reel quantity

Surface Mount Solid Polymer Aluminum

Electrolytic Capacitors NPC Series

PRECAUTIONS

Please review the notes on correct use, safety and precautions found at

www.niccomp.com/precautions

If in doubt or uncertainty, please review your specic application - process

details with NIC’s technical support personnel: tpmg@niccomp.com

220

d58

220

d58

220

d58

Anode

RECOMMENDED LAND PATTERNS (mm)

Case Code a b c

D1, D5, D6, D7, D8 2.4 2.9 3.7

NOTES ON REFLOW SOLDERING:

1. SAC alloy (+217°C) reow soldering compatible

2. Soldering heat limits apply to the top surface of component

3. If you have concerns about your reow soldering prole

review them with NIC to insure compatible [tpmg@niccomp.com]

APPLICATION NOTES:

1. NPC Series cannot be used in coupling, time-constant or other

circuits that are greatly affected by leakage current.

2. NPC parts are polarized so be sure to verify component orientation

when mounting components.

3. Do not apply over voltage exceeding the rated voltage.

4. Do not apply ripple current over the specied maximum ripple current

rating.

TIME (SECONDS)

COMPONENT SURFACE TEMP. (oC)

RECOMMENDED REFLOW SOLDERING PROFILE

Pre-Heat

160oC ~ 180°C

NATURAL COOLING

Peak Temperature

260°C Max. for 10 sec.

120 Sec. Max.

217

160

100

200

Time Above 217°C

90 sec. max.

260

Reflow Times: 2 times max.