25
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU System 50 Connectors
AMPMODU Interconnection System
AMPMODU System 50
3
The AMPMODU System 50
connector family includes a
wide variety of high density
board-to-board (thru-hole
and surface-mount) and
cable-to-board connectors.
AMPMODU System 50 is
composed of one- and two-
row receptacles and post
headers on .050 x .100
[1.27 x 2.54] spacing
between contacts for
extreme density and
efficient use of printed
circuit board area.
AMPMODU System 50
receptacles and header
assemblies can be
categorized in three groups:
board-mount headers,
board-mount receptacles
and cable-to-board
receptacles. Receptacle
contacts and mating .015
[0.38] square posts are
formed from high
conductivity copper alloy
and are selectively plated
with gold to promote higher
performance and reliability.
Board-mounted thru-hole
post headers and
receptacle connectors are
available for right-angle
and vertical mating
configurations. Surface-
mounted connectors are
available in vertical, double
row styles for parallel
stacking applications.
Shrouded post headers
provide polarization to
mating cable receptacles
and aid alignment of mating
connectors. Unshrouded
headers allow close
stacking of daughter cards.
Vertical stacking connectors
space parallel mated
boards as shown in the
illustration on page 63.
Housings on all board-
mount assemblies are made
of high temperature tolerant
materials and incorporate
stand-offs for free drainage
of flux cleaning solutions.
Cable-to-board connectors
have integral latches for
positive locking to shrouded
mating headers (thru-hole or
surface-mount). Ribbon
cable connectors mass
terminate 30 AWG [0.05
mm2] solid and 32 AWG
[0.03 mm2] stranded, .025
[0.64] centerline ribbon
cable with PVC or Teflon®
insulation.
Connectors for mass
termination to FFC cable or
flexible etched circuitry
have dual beam contacts;
options include shielded
cable and solder tabs. Both
types of cable connectors
are available as component
parts and as completed
assemblies.
The variety of components
and application possibilities,
combined with small size
and outstanding quality,
make AMPMODU
System 50 suitable for high
density systems.
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■ Certified by
Canadian Standards
Association*,
File No. LR 7189
*CSA certification pending on certain products,
as noted.
Dimensioning:
Dimensions are in inches and millimeters.
Values in brackets are metric equivalents. Metric
symbols used are:
mm (millimeter)
cm (centimeter)
m (meter)
mm2(square millimeter)
C (Celsius)
N (newton)
kg (kilogram)
■ Produced under a
Quality Management
System certified
to ISO 9001
A copy of the
certificate is available
upon request.
R
R
ISO
Certified
9001
Double Row, .025
Ribbon Cable
Mount Receptacle
(Page 56)
(Page 52)
(Page 38)
(Page 44)
(Page 45)
(Page 39)
(Page 31)
(Page 29)
(Page 50)
(Page 27)
(Page 28)
(Page 33)
(Page 50)
(Page 32)
(Page 37)
(Page 30)
(Page 34)
(Page 40)
Teflon®is a trademark of E.I. du Pont de
Nemours and Company.
26
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
AMPMODU Interconnection System
Board-to-Board Connectors,
Thru-Hole
3
Product Facts
■High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
■Single row; select sizes 4
thru 50 positions
■Double row; select sizes 10
thru 100 positions
■Stand-offs for ease of
cleaning
■High temperature tolerant
thermoplastic housings
■Shrouded and unshrouded
headers available in single
and double row, vertical
and right-angle
configurations
The AMPMODU System 50
interconnection system is
designed to better meet
industry’s need for a high
density interconnect
system. The Board
Mounted Thru-Hole
Headers are available in
shrouded and unshrouded
versions. They are
composed of single and
double row post headers
with .050 x .100
[1.27 x 2.54] spacing
between contacts for
extreme density and
efficient use of printed
circuit board area. The
headers are available in
4 through 50 positions, in
a single row configuration,
and 10 through 100
positions, in a double row
design.
Board mounted post
headers are available in
right-angle and vertical
configurations. Shrouded
post headers provide
polarization and alignment
features for mating printed
circuit boards and cable
connectors, while
unshrouded headers allow
close stacking of daughter
cards. Housings for the
headers are made of black
thermoplastic material with
a 94V-0 rating. The
housings have stand-offs
for free drainage of flux
cleaning solutions.
27
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Single Row, Right-Angle
with Solder Clips
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part Numbers
Pos. A
4.330 [8.38] 5-104074-7
5.380 [9.65] 5-104074-2
6.430 [10.92] 5-104074-8
8.530 [13.46] 6-104074-0
10 .630 [16.00] 5-104074-1
12 .730 [18.54] 6-104074-1
15 .880 [22.35] 5-104074-3
20 1.130 [28.70] 5-104074-4
22 1.230 [31.24] 6-104074-4
25 1.380 [35.05] 5-104074-5
28 1.530 [38.86] 7-104074-0
30 1.630 [41.40] 5-104074-6
36 1.930 [49.02] 6-104074-6
40 2.130 [54.10] 6-104074-7
45 2.380 [60.45] 6-104074-8
50 2.630 [66.80] 6-104074-9
*Circuit identification feature omitted on 4, 5 and 6 position headers.
Notes:
1. Solder Clips located as shown for 10 through 30 position headers.
2. Solder Clips located as shown for 4 through 8 and 36 through 50 position headers.
Circuit Identification
Feature*
See Note 2.
See Note 1.
Solder
Clip
.100
[2.54]
.060
[1.52]
2 Plc.
28
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .00050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
4.330 [8.38] 5-104071-7 —
5.380 [9.65] 5-104071-2 —
6.430 [10.92] 5-104071-8 —
8.530 [13.46] 6-104071-0 —
10 .630 [16.00] 5-104071-1 —
12 .730 [18.54] 6-104071-1 5-104804-3
13 .780 [19.81] 6-104071-2 —
15 .880 [22.35] 5-104071-3 5-104804-2
17 .980 [24.89] 6-104071-3 —
20 1.130 [28.70] 5-104071-4 —
22 1.230 [31.24] 6-104071-4 —
25 1.380 [35.05] 5-104071-5 —
30 1.630 [41.40] 5-104071-6 —
36 1.930 [49.02] 6-104071-6 —
40 2.130 [54.10] 6-104071-7 —
50 2.630 [66.80] 6-104071-9 —
*Circuit identification feature omitted on 4, 5, and 6 position headers.
.060 [1.52]
2 Plc.
Circuit Identification
Feature*
Post Length
(See chart
below)
29
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
with Solder Clips
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031 Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
8.330 [8.32] 5-104069-8 —
10 .380 [9.65] 5-104069-4 6-104477-2
12 .430 [10.92] — 5-104477-8
14 .480 [12.19] 6-104069-0 —
16 .530 [13.46] 6-104069-1 —
20 .630 [16.00] 5-104069-1 5-104477-2
24 .730 [18.54] 6-104069-2 6-104477-0
26 .780 [19.81] 6-104069-3 —
30 .880 [22.35] 5-104069-5 5-104477-3
34 .980 [24.89] 6-104069-4 —
40 1.130 [28.70] 5-104069-6 5-104477-4
50 1.380 [35.05] 5-104069-2 5-104477-5
60 1.630 [41.40] 5-104069-7 5-104477-9
68 1.830 [46.48] 6-104069-8 —
72 1.930 [49.02] 6-104069-6 5-104477-1
80 2.130 [54.10] 5-104069-3 5-104477-6
100 2.630 [66.80] 6-104069-7 5-104477-7
*Circuit identification feature omitted on 8, 10 and 12 position headers.
Notes:
1. Solder Clips located as shown for 16 through 100 position headers.
2. Solder Clips located as shown for 8 through 12 and 60 through 100 position headers.
.060
[1.52]
2 Plc.
Circuit Identification
Feature*
Post Length
(See chart
below)
Solder
Clip
See Note 2.
See Note 1.
30
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contact — Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127]nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
10 .380 [9.65] 5-104068-2 —
12 .430 [10.92] 5-104068-8 —
14 .480 [12.19] 5-104068-9 —
16 .530 [13.46] 6-104068-0 5-104666-9
20 .630 [16.00] 5-104068-1 5-104666-1
24 .730 [18.54] 6-104068-1 6-104666-0
26 .780 [19.81] 6-104068-2 —
30 .880 [22.35] 5-104068-3 5-104666-2
34 .980 [24.89] 6-104068-3 —
40 1.130 [28.70] 5-104068-4 5-104666-3
44 1.230 [31.24] 6-104068-4 —
50 1.380 [35.05] 5-104068-5 5-104666-4
60 1.630 [41.40] 5-104068-6 5-104666-7
68 1.830 [46.48] 6-104068-8 5-104666-8
72 1.930 [49.02] 6-104068-5 —
80 2.130 [54.10] 6-104068-6 5-104666-5
100 2.630 [66.80] 6-104068-7 5-104666-6
*Circuit identification feature omitted on 10 and 12 position headers.
.060 [1.52]
2 Plc. Circuit Identification
Feature*
Post Length
(See chart
below)
31
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
With Card Slots
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — page 39
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .394 [10.01] 5-104076-5
20 .644 [16.36] 5-104076-1
30 .894 [22.71] 5-104076-6
40 1.144 [29.06] 5-104076-3
50 1.394 [35.41] 5-104076-7
60 1.644 [41.76] 5-104076-2
80 2.144 [54.46] 5-104076-4
100 2.644 [67.16] 5-104076-8
Circuit Identification
Feature
.125
[3.18]
32
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Single Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031 No. of Dimension Part
Pos. A Numbers
4.215 [5.46] 5-104186-1
8.415 [10.54] 5-104186-5
12 .615 [15.62] 5-104186-7
15 .765 [19.43] 5-104186-9
17 .865 [21.97] 6-104186-0
20 1.015 [25.78] 6-104186-1
25 1.265 [32.13] 6-104186-3
30 1.515 [38.48] 6-104186-5
31 1.565 [39.75] 7-104186-0
40 2.015 [51.18] 6-104186-7
33
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
4.215 [5.46] 5-104178-1
6.315 [8.00] 5-104178-3
8.415 [10.54] 5-104178-5
10 .515 [13.08] 5-104178-6
20 1.015 [25.78] 6-104178-1
25 1.265 [32.13] 6-104178-3
.100
[2.54]
.125
[3.18] .015
[0.38]
.050 Typ.
[1.27]
A.100
[2.54] .048
[1.22]
.096
[2.44]
34
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers, Shrouded and
Unshrouded
3
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 39,
40, 45, 51 & 52
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .265 [6.73] 5-104118-3
20 .515 [13.08] 5-104118-7
30 .765 [19.43] 6-104118-0
40 1.015 [25.78] 6-104118-2
50 1.265 [32.13] 5-104118-1
60 1.515 [38.48] 6-104118-4
80 2.015 [51.18] 6-104118-6
100 2.515 [63.88] 6-104118-7
35
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers
Shrouded and Unshrouded
3
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 39,
40, 45, 51, & 52
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 42
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
8.215 [5.46] 5-103916-3
20 .515 [13.08] 5-103916-2
30 .765 [19.43] 5-103916-9
36 .915 [23.24] 6-103916-8
40 1.015 [25.78] 6-103916-1
50 1.265 [32.13] 6-103916-3
60 1.515 [38.48] 6-103916-4
80 2.015 [51.18] 6-103916-6
100 2.515 [63.88] 6-103916-7
.125
[3.18]
.015
[0.38]
.100
[2.54]
.100
[2.54]
.050
[1.27] Ty p . .100
[2.54]
.196
[4.98]
.048
[1.22]
36
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Receptacles
3
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Product Facts
■High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
■Right-angle and vertical
styles
■Single row; select sizes 5
thru 50 positions
■Double row; select sizes 10
thru 100 positions
■Contacts are selectively
plated with gold
■Stand-offs for removal of
solder flux
The AMPMODU System 50
thru-hole receptacles offer
a wide variety of high
density board-to-board
connectors. The .050 [1.27]
spacing between each
contact provides an
extremely dense
interconnect package and
results in a more efficient
use of the printed circuit
board space.
AMPMODU System 50
thru-hole receptacles are
available in right-angle and
vertical configurations and
are composed of single
and double row versions.
The single row versions are
available in select sizes of
5 thru 50 positions and
double row in positions
from 10 thru 100.
Receptacle contacts and
mating .015 [0.38] square
posts are formed from high
conductivity copper alloy
and are selectively plated
with gold for higher
performance and reliability.
The receptacle housings
are made of black
thermoplastic, with a 94V-0
rating to withstand high
temperatures of reflow
soldering and incorporate
stand-offs for free drainage
of flux cleaning solutions.
37
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacles
3
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Right-Angle
With Solder Clips
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 32
& 33
PC Board Hole Layout — page 41
Technical Documents —page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .544 [13.82] 5-104196-2
15 .794 [20.17] 5-104196-4
20 1.044 [26.52] 5-104196-5
Notes:
1. Solder Clips located as shown for 10 through 25 position receptacles.
2. Solder Clips located as shown for 5 and 25 position receptacles.
Circuit Identification
Feature
See Note 2.
See Note 1.
Solder
Clip
38
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacles
3
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
No. of Dimension Part
Pos. A Numbers
10 .544 [13.82] 5-104192-2
12 .644 [16.35] 5-104192-3
15 .794 [20.17] 5-104192-4
20 1.044 [26.52] 5-104192-5
30 1.544 [39.22] 5-104192-7
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 27,
28, 32, & 33
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
39
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacles
3
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 31,
34 & 35
PC Board Hole Layout — page 41
Technical Documents —page 64
Product Specification 108-1093
Application Specification
114-25031
No. of Dimension Part
Pos. A Numbers
10 .294 [7.47] 5-103911-1
20 .544 [13.82] 5-103911-2
30 .794 [20.17] 5-103911-7
40 1.044 [26.52] 5-103911-5
50 1.294 [32.87] 5-103911-4
60 1.544 [39.22] 5-103911-3
80 2.044 [51.92] 5-103911-6
100 2.544 [64.62] 5-103911-8
Notes:
1. Solder Clips located as shown for 20 through 100 position receptacles.
2. Solder Clips located as shown for 10, 60, 80 and 100 position receptacles.
Circuit Identification
Feature
See Note 2.
See Note 1.
Solder
Clip
40
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacles
3
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
Part Numbers
No. of Dimension Post Length
Pos. A .100 [2.54] .145 [3.68]
10 .294 [7.47] 5-104078-3 —
20 .544 [13.82] 5-104078-1 —
24 .644 [16.36] 5-104078-9 —
30 .794 [20.17] 5-104078-4 —
34 .894 [22.71] 6-104078-0 —
40 1.044 [26.52] 5-104078-2 —
50 1.294 [32.87] 5-104078-5 5-104744-7
60 1.544 [39.22] 5-104078-6 —
68 1.744 [44.30] 6-104078-3 —
80 2.044 [51.92] 5-104078-7 5-104744-4
100 2.544 [64.62] 5-104078-8 5-104744-5
Circuit Identification
Feature
Post Length
(See chart
below)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
41
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Recommended PC Board Hole Layouts, Thru-Hole Board-to-Board Connectors
AMPMODU Interconnection System
PC Board Hole Layouts
3
Single Row, Right-Angle
with Solder Clips
Note: Consult Tyco Electronics for
customer drawings detailing toler-
ances.
* This dimension is for Shrouded,
Single Row Right-Angle Headers
only.
** This dimension is for Single Row
Right-Angle Receptacles only.
Double Row, Right-Angle
with Solder Clips
Note: Consult Tyco Electronics for
customer drawings detailing toler-
ances.
* This dimension is for Shrouded,
Double Row Right-Angle Headers
only.
** This dimension is for Double Row
Right-Angle Receptacles only.
No. of Dimensions
Pos. BCDE
10 .200 [5.08] — .100 [2.54] —
20 .450 [11.43] .350 [8.89] .050 [1.27] —
24 .550 [13.97] .450 [11.43] .050 [1.27] —
26 .600 [15.24] .500 [12.70] .050 [1.27] —
30 .700 [17.78] .600 [15.24] .050 [1.27] —
34 .800 [20.32] .700 [17.78] .050 [1.27] —
40 .950 [24.13] .850 [21.59] .050 [1.27] —
50 1.200 [30.48] 1.100 [27.94] .050 [1.27] —
60 1.450 [36.83] 1.350 [34.29] .050 [1.27] .675 [17.15]
68 1.650 [41.91] 1.550 [39.37] .050 [1.27] .775 [19.69]
72 1.750 [44.45] 1.650 [41.91] .050 [1.27] .825 [20.96]
80 1.950 [49.53] 1.850 [46.99] .050 [1.27] .925 [23.50]
100 2.450 [62.23] 2.350 [59.69] .050 [1.27] 1.175 [29.85]
.037 Dia.
[0.94] Typ.
(Soldered mechanical
solder clip)
Plated-Thru Hole
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
PC Board Edge
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
PC Board Edge
.335**
[8.51]
No. of Dimensions
Pos. BCDE
4.150 [3.81] — .075 [1.91] —
5.200 [5.08] — .100 [2.54] —
6.250 [6.35] — .125 [3.18] —
8.350 [8.89] — .175 [4.45] —
10 .450 [11.43] .350 [8.89] .050 [1.27] —
12 .550 [13.97] .450 [11.43] .050 [1.27] —
15 .700 [17.78] .600 [15.24] .050 [1.27] —
20 .950 [24.13] .850 [21.59] .050 [1.27] —
22 1.050 [26.67] .950 [24.13] .050 [1.27] —
25 1.200 [30.48] 1.100 [27.94] .050 [1.27] —
28 1.350 [34.29] 1.250 [31.75] .050 [1.27] .625 [15.88]
30 1.450 [36.83] 1.350 [34.29] .050 [1.27] .675 [17.15]
36 1.750 [44.45] 1.650 [41.91] .050 [1.27] .825 [20.96]
40 1.950 [49.53] 1.850 [46.99] .050 [1.27] .925 [23.50]
45 2.200 [55.88] 2.100 [53.34] .050 [1.27] 1.050 [26.67]
50 2.450 [62.23] 2.350 [59.69] .050 [1.27] 1.175 [29.85]
.037 Dia.
[0.94] Typ.
(Soldered
mechanical
solder clip)
Plated-Thru
Hole
42
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Recommended PC Board Hole Layouts, Thru-Hole
Board-to-Board Connectors (Continued)
AMPMODU Interconnection System
PC Board Hole Layouts
3
Single Row
Without Solder Clips
Note: Consult Tyco Electronics for
customer drawings detailing toler-
ances.
Double Row
Without Solder Clips
Note: Consult Tyco Electronics for
customer drawings detailing toler-
ances.
No. of Dimension
Pos. B
4.150 [3.81]
5.200 [5.08]
6.250 [6.35]
8.350 [8.89]
10 .450 [11.43]
12 .550 [13.97]
13 .600 [15.24]
15 .700 [17.78]
No. of Dimension
Pos. B
8.150 [3.81]
10 .200 [5.08]
12 .250 [6.35]
14 .300 [7.62]
16 .350 [8.89]
20 .450 [11.43]
24 .550 [13.97]
26 .600 [15.24]
30 .700 [17.78]
34 .800 [20.32]
No. of Dimension
Pos. B
36 .850 [21.59]
40 .950 [24.13]
44 1.050 [26.67]
50 1.200 [30.48]
60 1.450 [36.83]
68 1.650 [41.91]
72 1.750 [44.45]
80 1.950 [49.53]
100 2.450 [62.23]
.022 Dia.
[0.56] TYP.
Plated-Thru Hole
.022 Dia.
[0.56] TYP.
Plated-Thru
Hole
No. of Dimension
Pos. B
17 .800 [20.32]
20 .950 [24.13]
22 1.050 [26.67]
25 1.200 [30.48]
30 1.450 [36.83]
31 1.500 [38.10]
36 1.750 [44.45]
40 1.950 [49.53]
50 2.450 [62.23]
43
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Surface-Mount Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
AMPMODU Interconnection System
Board-to-Board Connectors,
Surface-Mount
3
Product Facts
■Surface-mount option for
parallel board-to-board
applications; completely
intermateable with
AMPMODU System 50
thru-hole board-to-board
and cable-to-board systems
■Double row, vertical,
shrouded header and
receptacle assemblies
■Available in select sizes
from 10 through 100
positions
■High Density; contacts
spaced on .050 x .100 [1.27
x 2.54] centers; compact
footprint
■Compatible with standard
surface-mount processes
■Stand-offs for free drainage
of flux cleaning solutions;
visible solder joints for easy
inspection
■Simple, low insertion-force
holddown for process
retention and long-term
strain relief for solder joints
■Available in tape and reel
packaging (with vacuum
covers) for automatic
placement.
The high-density surface-
mount connector is another
mounting option in the
AMPMODU System 50
connector family.
This surface-mount system
is fully intermateable with
the AMPMODU System 50
thru-hole and cable-to-
board connectors.
Additionally, the design of
the mating interface has not
been changed, maintaining
the same high reliability as
the thru-hole product.
The surface-mount system
includes double row,
vertical, shrouded header
and receptacle assemblies
in select sizes from 10
through 100 positions. It
meets the tight dimensional
requirements of surface-
mount technology. The
simple, low insertion-force
holddown provides both
processing retention and
long-term strain relief for
the solder joints in the
headers and receptacles.
44
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Surface-Mount Headers, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Headers
3
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact under-
plated .000050 [0.00127] nickel
Holddown — Copper alloy, plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
Board-to-Board Spacing — page 63
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
Recommended PC Board Layout
No. of Dimensions Part Numbers
Pos. Pkg in Pkg in
ABCDE
Tube Tape & Reel*
10 .380 [9.65] .200 [5.08] — .025 [0.64] — 5-104549-1 5-147377-1
12 .430 [10.92] .250 [6.35] — — — 6-104549-1 —
20 .630 [16.00] .450 [11.43] .150 [3.81] .150 [3.81] — 5-104549-2 5-147377-2
24 .730 [18.54] .550 [13.97] .200 [5.08] .200 [5.08] — 5-104549-3 5-147377-9
30 .880 [22.35] .700 [17.78] .275 [6.99] .275 [6.99] — 5-104549-5 5-147377-3
40 1.130 [28.70] .950 [24.13] .400 [10.16] .400 [10.16] — 5-104549-6 5-147377-4
50 1.380 [35.05] 1.200 [30.48] .525 [13.34] .525 [13.34] .025 [0.64] 5-104549-7 5-147377-5
60 1.630 [41.40] 1.450 [36.83] .650 [16.51] .650 [16.51] .000 5-104549-8 5-147377-6
80 2.130 [54.10] 1.950 [49.53] .900 [22.86] .900 [22.86] .000 5-104549-9 5-147377-7
100 2.630 [66.80] 2.450 [62.23] 1.150 [29.21] 1.150 [29.21] .000 6-104549-0 5-147377-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
.042±.003
[1.07± 0.08] Dia. Typ.
(Plated-Thru Hole)
Holes for holddowns are not
required for parts packaged
in tape and reel.
A±.003
[.08] .057±.010
[1.45±.25]
.435±.007
[11.05±.18]
.100
[2.54]
.050
[1.27] Typ.
.045
[1.14] Ref.
.031±.010
[.79±.25]
.284
[7.21]
.344 [8.74]
.053±.006
[1.35±0.15]
.125
[3.18]
Detail A
45
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Surface-Mount Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacles,
Surface Mount
3
Double Row, Vertical
Material and Finish
Housing — Glass-filled thermpolastic,
black, 94V-0 rated
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact
underplated .000050 [0.00127] nickel
Holddown — Copper alloy; duplex
plated .000150 [0.00381] tin over
.000050 [0.00127] nickel
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
Board-to-Board Spacing — page 63
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
No. of Dimensions Part Numbers
Pos. A B C Pkg in Tube Pkg in Tape & Reel*
10 .294 [7.47] .200 [5.08] .400 [10.16] 5-104550-1 5-147378-1
20 .544 [13.82] .450 [11.43] .650 [16.51] 5-104550-2 5-147378-2
24 .644 [16.36] .550 [13.97] .750 [19.05] 5-104550-3 5-147378-9
30 .794 [20.17] .700 [17.78] .900 [22.86] 5-104550-4 5-147378-3
40 1.044 [26.52] .950 [24.13] 1.150 [29.21] 5-104550-5 5-147378-4
50 1.294 [32.87] 1.200 [30.48] 1.400 [35.56] 5-104550-6 5-147378-5
60 1.544 [39.22] 1.450 [36.83] 1.650 [41.91] 5-104550-7 5-147378-6
80 2.044 [51.92] 1.950 [49.53] 2.150 [54.61] 5-104550-8 5-147378-7
100 2.544 [64.62] 2.450 [62.23] 2.650 [67.31] 5-104550-9 5-147378-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
Recommended PC Board Layout
.042±.003 Dia.Typ.
[1.07±0.08] (Plated-Thru hole)
Holes for holddowns are not
required for parts packaged
in tape and reel.
.025
[0.64] Ref.
.125±.008
[3.18±0.20]
2 Plc.
.198±.002 [5.03±.05]
.100
[2.54]
A
.053±.006
[1.35±0.15]
.370±.003
[9.40±0.08]
.050
[1.27]
.065±.001
[1.65±0.03] Dia. Typ. (Pad)
.285
[7.24] Ref.
46
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable
AMPMODU Interconnection System
Cable-to-Board Connectors,
FFC Cable
3
The cable-to-board .050
[1.27] center FFC
receptacle connectors are
part of the AMPMODU
System 50 family for
terminating flexible flat
conductor cable and
flexible etched circuitry.
The FFC receptacle uses a
dual beam contact with 30
microinches of gold plating.
The FFC receptacle
connectors have an integral
latch for positive locking to
shrouded mating headers.
Flexible flat conductor cable
is a planar parallel
conductor cable. It can be
used as a one-to-one
connector or as a complex
harness, allowing split-outs
and special routing. The
cable is comprised of .026
[0.66] wide x .003 [0.08]
thick conductors made of
copper per QQ-C-502 and
insulated with a flame
retardant polyester film.
The FFC contacts are
available in receptacle and
Product Facts
■Signal application only,
1.5 amperes maximum
single circuit
■Single or double row
connectors
■Terminates flexible flat
conductor cable and flexible
etched circuitry
■Shielded cable provides for
customizing
■Center latch housing
providing positive latching
solder tab. Receptacle
contacts are made of
phosphor bronze with a
finish of plated gold duplex,
while the solder tab
contacts are finished in a
bright tin-lead overall.
The complete product line
provides solder tabs for
board mounting at low cost
and custom shielding of the
cable.
47
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable] (Continued)
AMPMODU Interconnection System
Flexible Flat
Conductor Cable
3
Custom Designed
Cable Assemblies
Tyco Electronics can sup-
ply customized flexible flat
conductor cable assem-
blies using the components
shown on pages 48 thru 54.
Typical examples of these
cable assemblies are
shown to the right.
And, to meet the internal
shielding requirements of
today’s complex electronic
equipment, custom
designed shielded FFC
cable assemblies can be
made to your specific
specifications.
Single Row
Receptacle
Housing
Solder Tabs Single Row
Receptacle
Housing
Double Row
Receptacle
Housing
FFC Cable,
.050 [1.27]
Centerline
FFC Cable,
.050 [1.27]
Centerline
Solder Tabs
48
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
FFC Contacts, .050 x .100 [1.27 x 2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
FCC
Contacts
3
C*
.725
[18.42]
.0085
[0.22] .016
[0.41]
B
C*
D
Accepts .015 [0.38] Sq. Post
.125-.350 [3.18-8.89] Long
Material and Finish
Phosphor bronze; plated gold
duplex or bright tin-lead overall
(See chart.)
Related Product Data
Performance Characteristics —
page 63
Housings — pages 49-52
Application Tooling — page 60-62
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Receptacle Solder Tab
Contacts Application Tooling
Dimensions Part Numbers
Type Config. Part No./
Machine Machine With
Finish BC*D Programmer
Receptacle Strip 1-487547-1
1
—.520 .725
[13.21] [18.42]
Strip 487923-4
2
.245 .480 .685
[6.22] [12.19] [17.40]
Solder Tab Strip 487923-5
3
.245 .480 .685 224910-4 318619-4
[6.22] [12.19] [17.40] (120 V) (120 V)
Strip 487940-4
2
.110 .345 .550 224910-6 318619-6
[2.79] [8.76] [13.97] (240 V) (240 V)
Contact Splice Strip 487941-4
4
——
.385
[9.78]
Receptacle Strip 1-487547-2
5
—.520 .725
[13.21] [18.42]
1Duplex plated .000030 [0.00076] gold on mating area, .000100 [0.00254] min. bright tin in crimp area, with entire con-
tact underplated .000050 [0.00127] min. nickel.
2Plated .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel.
3Duplex plated .000015 [0.00038] gold on solder tab end, .000100 [0.00254] min. bright tin in crimp area, with entire
contact underplated .000050 [0.00127] min. nickel.
4Plated .000150 [3.81µm] min. bright tin over .000050 [1.27µm] min. nickel.
5Duplex Plated .000150 [0.00038] gold on mating area, .000100 [0.00254] min bright tin in crimp area, with entire con-
tact underplated .000050 [0.00127] min. nickel.
*After cut-off from carrier strip.
Receptacle Strip
Solder Tab Strip
D
.100
[2.54] Ty p .
.211
[5.36] Max.
.0085±.0005
[0.216±0.013] Ty p .
Localized Plate Area 4
49
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
AMPMODU Interconnection System
Receptacle
Housings
3
Material and Finish
Housing — Black thermoplastic, flame
retardant, 94V-0 rated
Related Product Data
Performance Characteristics —
page 63
Receptacle Contacts — page 48
Mateable Headers — pages 27, 28,
32 & 33
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Plain Style Housings
Latch Style Housings
.585
[14.86]
B
B
.585
[14.86]
.050 Typ
[1.27] Ty p .
.047
[1.19]
(2 Pls.) .275
[6.98]
A
.294
[7.47]
.098
[2.49]
A
.047
[1.19]
(2 Pls.)
.098
[2.49]
.050 Ty p
[1.27] Ty p .
Plain Style Housings
Latch Style Housings
50
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacle
Housings
3
Latch Style Housing
AMPMODU System 50 Header, Shrouded
(Right-Angle Post shown
for ref. only.)
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
Post Removed
Plain Housings,
Stacked Side-to-Side
(See Note 1 below.)
Plain Housing,
Stacked End-to-End
(See Notes
1 & 2 below.)
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Typical Cable-to-Board Application
of Plain Receptacle Housing
Notes: 1. Plain housings are side-to-side stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the posts located between the adjoining
housings must be removed to provide housing end clearance.
No. of Dimensions Part Numbers
Pos. A B Plain Receptacle Housing Latch Style Receptacle Housing
4.150 [3.18] .244 [6.20] 487544-1 487545-1
5.200 [5.08] .294 [7.47] 487544-2 487545-2
6.250 [6.35] .344 [8.74] 487544-3 487545-3
7.300 [7.62] .394 [10.01] 487544-4 487545-4
8.350 [8.89] .444 [11.28] 487544-5 487545-5
10 .450 [11.43] .544 [13.82] 487544-7 487545-7
12 .550 [13.97] .644 [16.36] 487544-9 487545-9
13 .600 [15.24] .694 [17.63] — 1-487545-0
15 .700 [17.78] .794 [20.17] 1-487544-2 1-487545-2
16 .750 [19.05] .844 [21.44] 1-487544-3 —
17 .800 [20.32] .894 [22.71] 1-487544-4 1-487545-4
20 .950 [24.13] 1.044 [26.52] 1-487544-7 1-487545-7
22 1.050 [26.67] 1.144 [29.06] 1-487544-9 1-487545-9
25 1.200 [30.48] 1.294 [32.87] 2-487544-2 2-487545-2
26 1.250 [31.75] 1.343 [34.11] — 2-487545-3
28 1.350 [34.29] 1.443 [36.65] — 2-487545-5
30 1.450 [36.83] 1.544 [39.22] — 2-487545-7
36 1.750 [44.45] 1.844 [46.84] 3-487544-3 3-487545-3
40 1.950 [49.53] 2.044 [51.92] — 3-487545-7
45 2.200 [55.88] 2.294 [58.27] — 4-487545-2
50 2.450 [62.23] 2.544 [64.62] 4-487544-7 4-487545-7
Note: Other sizes of receptacle housings (plain and latch style) can be made available, consult Tyco Electronics.
51
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
AMPMODU Interconnection System
Receptacle
Housings
3
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 63
Receptacle Contacts — page 48
Mateable Headers — pages 29, 30,
34, 35, & 44
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Plain Style Housings
B
.050 Typ
[1.27] Ty p .
.047
[1.19]
(2 Plc.)
.100
[2.54]
.198
[5.03]
A
.585
[14.86]
Plain
.050 Typ
[1.27] Ty p .
.047
[1.19]
(2 Plc.)
.100
[2.54]
.198
[5.03]
.375
[9.53]
A
B
.585
[14.86]
Latch
Plain Style Housings
Latch Style Housings
Latch Style Housings
52
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacle
Housings
3
Latch Style Housing (Shown)
AMPMODU System 50 Header,
Shrouded (Right-Angle Post
shown for ref. only.)
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
Post Removed
Plain Housing,
Stacked End-to-End
(See Notes 1 & 2 below.)
Typical Cable-to-Board Application
of Plain Receptacle Housing
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Notes: 1. Plain housings are end-to-end stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the two posts located between the adjoining
housings must be removed to provide housing end clearance.
No. of Dimensions Plain Housing Latch Style Housing
Pos. ABPart Numbers Part Numbers
8.150 [3.81] .247 [6.27] 487938-8 487937-8
10 .200 [5.08] .297 [7.54] 1-487938-0 1-487937-0
12 .250 [6.35] .374 [8.81] 1-487938-2 1-487937-2
14 .300 [7.62] .397 [10.08] 1-487938-4 1-487937-4
16 .350 [.889] .447 [11.35] 1-487938-6 1-487937-6
20 .450 [11.43] .547 [13.89] 2-487938-0 2-487937-0
24 .550 [13.97] .647 [16.43] 2-487938-4 2-487937-4
26 .600 [15.24] .697 [17.7] 2-487938-6 2-487937-6
30 .700 [17.78] .797 [20.24] 3-487938-0 3-487937-0
34 .800 [20.32] .897 [22.78] 3-487938-4 3-487937-4
40 .950 [24.13] 1.047 [26.59] 4-487938-0 4-487937-0
44 1.050 [26.67] 1.147 [29.13] 4-487938-4 4-487937-4
50 1.200 [30.48] 1.297 [39.94] 5-487938-0 5-487937-0
60 1.450 [36.83] 1.547 [39.29] — 6-487937-0
72 1.750 [44.45] 1.847 [46.91] 7-487938-2 7-487937-2
80 1.950 [49.53] 2.047 [51.99] 8-487938-0 8-487937-0
100 2.450 [62.23] 2.547 [64.69] 487938-1 487937-1
Note: Other sizes of receptacle housings, up to 120 positions, can be made available, consult Tyco Electronics.
53
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline, Cable-to-Board
AMPMODU Interconnection System
ZIF-Line
Connectors
3
Material and Finish
Housing and Cover — Black
thermoplastic, flame retardant,
94V-0 rated
Contacts — Phosphor bronze, plated
.000150 [0.00381] min. bright tin over
.000050 [0.00127] min. nickel on entire
contact
Performance Characteristic
Contact Current Rating—
1 ampere†
†1 ampere rating is for single circuit.
Multiple circuits, ambient temperature
and conductor size affect current
carrying capacity.
Related Product Data
FFC Cable (with Tin-Plated
Prepared Ends) —
Consult Tyco Electronics.
Technical Documents — page 64
Product Specification 108-16025
Application Specification
114-16014
Pos. 1
Identification
.240
[6.10]
.240
[6.10]
.040
[1.02]
.010
[0.25] .105
[2.67]
.310
[7.87]
.100
[2.54]
.050
[1.27]
.020
[0.508]
.155
[3.94]
A
B
.050 Typ
[1.27] Ty p .
.100 Typ
[2.54] Ty p .
.210 Typ
[5.33] Min.
.004-.012
[0.102-0.305]
Thk.
Note: ZIF-Line connector illustrated above with
cover in closed position.
.050±.002*Dia. Typ
[1.27±0.05] Dia. Typ.
.031±.003 Dia. Typ
[0.79±0.08] Dia. Typ.
.100±.002
[2.54±0.05]
Pos. 1
**
Recommended Mounting Hole Pattern
**±.002 [±0.05] tolerance not to accumulate
within one mounting hole pattern.
**This mounting hole required for even-numbered
connector sizes only.
FFC Cable or
Flexible Etched Circuitry
with Prepared Ends*
ZIF-Line Connector
(Cover Open)
ZIF-Line Connector
(Termination
Completed with
Cable Inserted and
Cover Closed)
*FFC cable with tin-plated prepared ends can be made available, consult Tyco Electronics.
Note: Special preparation of cable is required, refer to Tyco Electronics Application Specification No. 114-16014.
Typical Flexible Flat Conductor Cable-to-Board Application
Vertical Cable Entry
54
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
ZIF-Line
Connectors
3
No. of Dimensions Connector
Pos. AB
Part
Numbers
5.470 [11.94] .410 [10.41] 5-487576-0
6.520 [13.21] .460 [11.68] 5-487576-1
7.570 [14.48] .510 [12.95] 4-487576-8
8.620 [15.75] .560 [14.22] 4-487576-9
9.670 [17.02] .610 [15.49] 487576-1
10 .720 [18.29] .660 [16.76] 487576-2
11 .770 [19.56] .710 [18.03] 487576-3
12 .820 [20.83] .760 [19.30] 487576-4
13 .870 [22.10] .810 [20.57] 487576-5
14 .920 [23.37] .860 [21.84] 487576-6
15 .970 [24.64] .910 [23.11] 487576-7
16 1.020 [25.91] .960 [24.38] 487576-8
17 1.070 [27.18] 1.010 [25.65] 487576-9
18 1.120 [28.45] 1.060 [26.92] 1-487576-0
19 1.170 [29.72] 1.110 [28.19] 1-487576-1
20 1.220 [30.99] 1.160 [29.46] 1-487576-2
21 1.270 [32.26] 1.210 [30.73] 1-487576-3
22 1.320 [33.53] 1.260 [32.00] 1-487576-4
23 1.370 [34.80] 1.310 [33.27] 1-487576-5
24 1.420 [36.07] 1.360 [34.54] 1-487576-6
25 1.470 [37.34] 1.410 [35.81] 1-487576-7
26 1.520 [38.61] 1.460 [37.08] 1-487576-8
27 1.570 [39.88] 1.510 [38.35] 1-487576-9
28 1.620 [41.15] 1.560 [39.62] 2-487576-0
29 1.670 [42.42] 1.610 [40.89] 2-487576-1
30 1.720 [43.69] 1.660 [42.16] 2-487576-2
No. of Dimensions Connector
Pos. AB
Part
Numbers
31 1.770 [44.96] 1.710 [43.43] 2-487576-3
32 1.820 [46.23] 1.760 [44.70] 2-487576-4
33 1.870 [47.50] 1.810 [45.97] 2-487576-5
34 1.920 [48.77] 1.860 [47.24] 2-487576-6
35 1.970 [50.04] 1.910 [48.51] 2-487576-7
36 2.020 [51.31] 1.960 [49.78] 2-487576-8
37 2.070 [52.58] 2.010 [51.05] 2-487576-9
38 2.120 [53.85] 2.060 [52.32] 3-487576-0
39 2.170 [55.12] 2.110 [53.59] 3-487576-1
40 2.220 [56.39] 2.160 [54.86] 3-487576-2
41 2.270 [57.66] 2.210 [56.13] 3-487576-3
42 2.320 [58.93] 2.260 [57.40] 3-487576-4
43 2.370 [60.20] 2.310 [58.67] 3-487576-5
44 2.420 [61.47] 2.360 [59.94] 3-487576-6
45 2.470 [62.74] 2.410 [61.21] 3-487576-7
46 2.520 [64.01] 2.460 [62.48] 3-487576-8
47 2.570 [65.28] 2.510 [63.75] 3-487576-9
48 2.620 [66.55] 2.560 [65.02] 4-487576-0
49 2.670 [67.82] 2.610 [66.29] 4-487576-1
50 2.720 [69.09] 2.660 [67.56] 4-487576-2
51 2.770 [70.36] 2.710 [68.83] 4-487576-3
52 2.820 [71.63] 2.760 [70.10] 4-487576-4
53 2.870 [72.90] 2.810 [71.37] 4-487576-5
54 2.920 [74.17] 2.860 [72.64] 4-487576-6
55 2.970 [75.44] 2.910 [73.91] 4-487576-7
55
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Ribbon Cable, System 50
AMPMODU Interconnection System
Cable-to-Board Connectors,
Ribbon Cable
3
The AMP-LATCH System 50
Ribbon Cable connector
is a receptacle connector
that will terminate ribbon
cable on .025 [0.64]
centerlines. It is available
in select sizes from 10 to
100 positions and will
accommodate 30 AWG
[0.05 mm2] solid or stranded
and 32 AWG [0.03 mm2]
stranded conductors, with
PVC cable insulation.
The housing and cover
(black) have a 94V-0 rating.
A copper alloy single
mating beam contact
provides the interconnect
between the conductor
and the .015 [0.38] square
posts on the .050 x .100
[1.27 x 2.54] grid. The
contacts are plated with
30 gold duplex plating. The
latching feature is located
on the receptacle, not the
header, and saves board
space and eliminates future
problems of “latch height
compatibility.”
Product Facts
■Preassembled housing
and cover
■One step termination
■End and daisy chain
termination
■Positive end latching of
connector to shrouded
headers
■Terminates 30 AWG
[0.05 mm2] solid or
stranded and
32 AWG [0.03 mm2]*
stranded .025 [0.64]
centerline ribbon cable
with PVC insulation
■0.5 ampere current
rating (limited by cable)
56
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Double Row Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Ribbon Cable
Receptacles
3
.228
[5.80]
.246
[6.25]
.580
[14.73]
Before
Termination
.198
[5.03]
.100
[2.54]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Latches — Stainless steel
Contacts — Copper alloy, plated gold
over nickel with tin in termination area
Related Product Data
Performance Characteristics —
page 63
Mateable Headers — pages 29, 30,
34, 35 & 44
Application Tooling — page 60-62
Mates with Posts —
.015 [0.38] square, .125 [3.18] long,
on.050 x .100 [1.27 x 2.54] grid
Technical Documents — page 64
Product Specification 108-1109
Application Specification
114-25029
.254
[6.45]
.228
[5.79]
.054
[1.37]
.430
[10.92]
.102
[2.59]
.335
[8.51]
.100
[2.54] .050
[1.27]
F
E
D
A
Cover
Latch
Contact
Housing
Ty p .
Position #1
Indicator
C
B
No. of Dimensions Part
Pos. A B C D E F Numbers
10 .510 [12.95] .445 [11.30] .225 [5.72] .200 [5.08] .096 [2.44] .294 [7.47] 2-111196-5
14 .610 [15.49] .545 [13.84] .325 [8.26] .300 [7.62] .146 [3.71] .394 [10.01] 2-111196-6
16 .660 [16.76] .595 [15.11] .375 [9.52] .350 [8.89] .171 [4.34] .444 [11.28] 2-111196-7
20 .760 [19.30] .695 [17.65] .475 [12.07] .450 [11.43] .221 [5.61] .544 [13.82] 1-111196-8
24 .860 [20.32] .795 [20.19] .575 [14.61] .550 [13.97] .271 [6.88] .644 [16.36] 2-111196-8
26 .910 [23.11] .845 [21.46] .625 [15.88] .600 [15.24] .296 [7.52] .694 [17.63] 2-111196-9
30 1.010 [25.65] .945 [24.00] .725 [18.42] .700 [17.78] .346 [8.79] .794 [20.17] 1-111196-9
34 1.110 [28.19] 1.045 [26.54] .825 [20.96] .800 [20.32] .396 [10.06] .894 [22.71] 3-111196-0
40 1.260 [32.00] 1.195 [30.35] .975 [34.54] .950 [24.13] .471 [11.96] 1.044 [26.52] 2-111196-0
44 1.360 [34.54] 1.295 [32.89] 1.075 [27.31] 1.050 [26.67] .521 [13.23] 1.144 [29.06] 3-111196-1
50 1.510 [38.35] 1.445 [36.70] 1.225 [31.12] 1.200 [30.48] .596 [15.14] 1.294 [32.87] 2-111196-1
60 1.760 [44.70] 1.695 [43.05] 1.475 [37.47] 1.450 [36.83] .721 [18.31] 1.544 [39.22] 2-111196-2
64 1.860 [47.24] 1.795 [45.59] 1.575 [40.00] 1.550 [39.37] .771 [19.58] 1.644 [41.76] 3-111196-2
68 1.960 [49.78] 1.895 [48.13] 1.675 [42.55] 1.650 [41.91] .821 [20.85] 1.744 [44.30] 3-111196-4
72 2.060 [52.32] 1.995 [50.67] 1.775 [45.08] 1.750 [44.45] .871 [22.12] 1.844 [46.84] 2-111196-3
80 2.260 [57.40] 2.195 [55.75] 1.975 [50.17] 1.950 [49.53] .971 [24.66] 2.044 [51.92] 3-111196-3
100 2.760 [70.10] 2.695 [68.45] 2.475 [62.87] 2.450 [62.23] 1.221 [31.01] 2.544 [64.62] 2-111196-4
57
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Paddleboard Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Paddleboard
Receptacles
3
Material and Finish
Housing — Black LCP thermoplastic,
94V-0 rated
Cover — Black polyester, 94V-0 rated
Contacts — Copper alloy, plated
.000100-.000200 [0.00245-0.00508]
bright tin over .000050-.000100
[0.00127-0.00254] nickel
.024
[0.61]
.118
[3.00]
.040
[1.02] .030
[0.76] Standoffs
(Various Locations)
B
.100
[2.54]
A
.020
[0.51]
.045
[1.19]
Ref.
.050
[1.27]
No. of PCB Hole Dimensions Part Numbers
Pos. Layout AB
10 1 .436 [11.07] .200 [5.08] 5111595-1
14 1 .536 [13.61] .300 [7.62] 5111595-2
16 2 .586 [14.88] .350 [8.89] 5111595-3
20 2 .686 [17.42] .450 [11.43] 5111595-4
24 2 .786 [19.96] .550 [13.97] 5111595-5
26 1 .836 [21.23] .600 [15.24] 5111595-6
28 2 .886 [22.50] .650 [16.51] 2-5111595-0
30 1 .936 [23.77] .700 [17.78] 5111595-7
34 1 1.036 [26.31] .800 [20.32] 5111595-8
40 2 1.186 [30.12] .950 [24.13] 5111595-9
Ty p . .050
[1.27] Ty p .
.168
[4.27]
.075
[1.91] Ty p .
.304
[7.72]
.008
[0.20]
Ty p .
.340
[8.64]
(Unterminated)
Position 1
Indicator
.273
[6.93]
(Terminated)
.050
[1.27] Ty p .
.075
[1.91] Ty p .
.304
[7.72]
.031
[0.79] Ty p .
Recommended PC Board Layout 2
No. of PCB Hole Dimensions Part Numbers
Pos. Layout AB
44 2 1.286 [32.66] 1.050 [26.67] 1-5111595-0
46 1 1.336 [33.93] 1.100 [27.94] 1-5111595-7
50 1 1.436 [36.47] 1.200 [30.48] 1-5111595-1
60 2 1.686 [42.82] 1.450 [36.83] 1-5111595-2
64 2 1.786 [45.36] 1.550 [39.37] 1-5111595-3
68 2 1.886 [47.90] 1.650 [41.91] 1-5111595-9
72 2 1.986 [50.44] 1.750 [44.45] 1-5111595-4
80 2 2.186 [55.52] 1.950 [49.53] 1-5111595-5
100 2 2.686 [68.22] 2.450 [62.23] 1-5111595-6
B
Related Product Data
Performance Characteristics —
page 63
Application Tooling — pages 60-62
Technical Documents — page 64
Product Specification 108-1109
Application Specification
114-25040
.050
[1.27] Ty p .
.075
[1.91] Ty p .
.304
[7.72]
.031
[0.79] Ty p .
Recommended PC Board Layout 1
B
58
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Flat Ribbon
Cable
3
No. of Dimensions Part Numbers
Conductors AB Length Per Reel*
100 ft. [30.48 m] 500 ft. [152.4 m]
16 .375 [9.52] .400 [10.16] 5-57013-1 5-57013-2
20 .475 [12.07] .500 [12.70] 1-57013-3 57013-1
24 .575 [14.61] .600 [15.24] 1-57013-4 57013-8
26 .625 [15.88] .650 [16.51] 2-57013-5 2-57013-6
28 .675 [17.14] .700 [17.78] 4-57013-6 4-57013-7
30 .725 [18.42] .750 [19.05] 1-57013-5 57013-6
34 .825 [20.95] .850 [21.59] 4-57013-9 5-57013-0
36 .875 [22.23] .900 [22.86] 1-57013-6 57013-7
40 .975 [24.77] 1.000 [25.40] 1-57013-7 57013-2
44 1.075 [27.31] 1.100 [27.94] 1-57013-8 57013-9
50 1.225 [27.94] 1.250 [31.75] 1-57013-9 1-57013-0
60 1.475 [37.47] 1.500 [38.10] 2-57013-0 57013-3
68 1.675 [42.55] 1.700 [43.18] 2-57013-1 1-57013-1
72 1.775 [45.09] 1.800 [45.72] 2-57013-2 1-57013-2
80 1.975 [50.17] 2.000 [50.80] 2-57013-3 57013-4
100 2.475 [62.87] 2.500 [63.50] 2-57013-4 57013-5
*Reel may contain separate lengths, 20 ft. [6.1 m] min. per length.
30 AWG [0.05 mm2],
Solid Bare Copper
Product Specifications
Voltage —150 Volts
Impedance — 80 Ohms Nominal
(GND,SIG, GND, applies to 30AWG
Solid Bare Copper)
Capacitance — 19.2 pf/ft at
1 MHz nom.
Propagation Delay — 1.51 ns/ft nom.
Crosstalk —
10 ft sample 5 ns rise time:
Near End — 4.0% max.
Far End — 6.0% max.
UL Listing — STYLE 2678
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E53793
Certified by Canadian
Standards Association,
(CSA File No. LL83498)
B
A
.0125
[0.318] .025
[0.635]
Ty p .
30 AWG [0.05 mm2]
Solid Bare Copper
Red Edge Mark
for orientation
.006 [0.152] Minimum
Insulation Thickness
Temperature Rating — -
20°C to +105°C
Insulation—Gray Flame
Retardant Flexible PVC
Flammability—UL: VW1
.025
[0.635]
Base Impedance Capacitance Inductance Nominal NEXT FEXT
Part No. Insulation AWG Voltage Single Ended Nominal Nominal Prop. 10 Ft 10 Ft
G-S-G G-S-G Delay 5ns Rise Time 5ns Rise Time
57013 PVC 30 Solid 150 Vac 80 Ohms Nom 19.2 pf/ft .160 mh/ft 1.51 ns/ft 4.0% Max 6.0% Max
219054, 219137 TPE 30 Solid 150 Vac 90+/- 6 Ohms 15.3 pf/ft .124 mh/ft 1.382 ns/ft 2.39% Nom 2.99% Nom
57119, 57139, 57145 FEP 30 Solid 300 Vac 93 Ohms Nom 13.6 pf/ft .120 mn/ft 1.34 ns/ft 2.6% Nom 2.8% Nom
57131 PVC 30 Stranded 150 VAC 66 Ohms Nom 23.0 pf/ft .100 mh/ft 1.55 ns/ft 2.8% Max 4.5% Max
219055 TPE 30 Stranded 150 VAC 78 Ohms Nom 19.4 pf/ft .118 mh/ft 1.510 ns/fr 1.37% Nom 2.37% Nom
57288, 57289, 57290 FEP 30 Stranded 300 Vac 85 Ohms Nom 15.4 pf/ft .110 mh/ft 1.36 ns/ft 2.5% Nom 2.8% Nom
219253 TPE 31 Stranded 150 Vac 90+/- 6 Ohms 15.4 pf/ft .125 mh/ft 1.527 ns/ft 1.97% Nom 2.51% Nom
57038 PVC 32 Stranded 150 Vac 80 Ohms Nom 19.2 pf/ft .147 mh/ft 1.51 ns/ft 4.0% Max 6.0% Max
219138 TPE 32 Stranded 150 Vac 104 Ohms Nom 12.8 pf/ft .138 mh/ft 1.664 ns/ft 2.10% Nom 2.57% Nom
57118, 57138, 57144 FEP 32 Stranded 300 Vac 105 Ohms Nom 13.0 pf/ft .120 mh/ft 1.36 ns/ft 2.6% Nom 2.8% Nom
Flat Ribbon Cable, PVC Insulation
Electrical Characteristics of .025 [0.64] Centerline IDC Ribbon Cable
R
R
59
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Centerline IDC Ribbon Cable, PVC Insulation
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Flat Ribbon
Cable
3
Part Numbers
No. of Dimensions Length Per Reel
Conductors AB
100 ft. [30.5 m] 500 ft. [152.4 m]
20 .475 [12.07] .500 [12.70] 1-57131-3 57131-1
40 .975 [24.77] 1.000 [25.40] 1-57131-7 57131-2
50 1.225 [31.12] 1.250 [31.75] 1-57131-9 1-57131-0
68 1.675 [42.55] 1.700 [43.18] 2-57131-1 1-57131-1
80 1.975 [50.17] 2.000 [50.80] 2-57131-3 57131-4
100 2.475 [62.87] 2.500 [63.50] 2-57131-4 57131-5
Edge
Mark
A
30 AWG 7/38
Stranded
Tinned Copper
.0125 [0.318]
.025 TYP
[0.635]
.006 [0.152] Minimum
Insulation Thickness PVC Insulation
.027 [0.686]
B
Product Specifications
Voltage Rating — 150 Volts
Impedance — 66 ohms (GND, SIG,
GND)
Capacitance — 23 pf/ft. at
1 KHz
Propagation Delay —
1.55 ns/ft. [5.6 ns/m]
Crosstalk —
10 Ft. sample 5 ns rise time
Near End — 2.8% max
Near End — 4.5% max
UL AWM Style 2678
Certified
For use with:
AMP-LATCH System 50,
AMPLIMITE .050 Series and
AMPMODU System 50
Connectors
Compatible with:
AMP R-CAM Ribbon Cable
Assembly Machine
30 AWG 7/38 Stranded
Tinned Copper
R
R
60
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Flexible Film Contacts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Application Tooling
3
Hand Crimping
Tool Assemblies
(for repair purposes)
The flexible film
semiautomatic bench
machine for terminating
.050 [1.27] and .100 [2.54]
centerline flexible flat
conductor cable (FFC),
flexible etched circuitry
(FEC), and flexible printed
wiring (FPW) with AMP FFC
reel-mounted contacts. For
each cable or circuitry, the
contacts are automatically
applied one-at-a-time in a
straight sequence. To skip
positions, an optional
programmer control box is
available. Crimp height is
easily adjustable in .0002
[.0051] increments.
Termination rates up to
200 contacts per minute.
Flexible Film Termination Machine
(Terminates Continuous Strip Contacts Sequentially)
Specifications
Width — 20.5 [520]
Depth — 27.5 [700]
Height — 18 [460] (with reel support)
Reel Size — 24 [610] (max.)
Weight — 100 lb. [45.4 kg]
Electrical Source —
120 VAC, 50/60 Hz, 7.0 A;
240 VAC, 50/60 Hz, 3.5 A
Technical Documents
Customer Manuals
409-5835 (Part Numbers 224910 and
318619)
409-5880 Programmer Kit (Part
Number 356484-1)
For tooling information, contact the
Technical Support Center:
1-800-522-6752.
Machine Part Numbers
Description Machine
Machine With Programmer*
.100 [2.54] C
L, Multi-Crimp, 120 V 224910-1 318619-1
.100 [2.54] C
L, Multi-Crimp, 240 V 224910-2 318619-2
.100 [2.54] C
L, ARINC, 120 V 224910-3 318619-3
.050 [1.27] C
L, Multi-Crimp, 120 V 224910-4 318619-4
.050 [1.27] C
L, Multi-Crimp, 240 V 224910-6 318619-6
*The Programmer Kit (Part No. 356484-1) may be purchased with a new
machine, or separately for adding onto an existing machine.
Part No. 90273-5—for .100 C
L
Multi-Crimp Contacts (408-9564)
Extraction Tools for .100 C
L
Contacts
Tool No. 91200-■■*— for Receptacle
Housings with Side Locking Lance
Slot (408-7916)
Tool No. 91047-■■*— for Receptacle
and Pin Housings with End Locking
Lance Slot (408-7384)
*Consult Tyco Electronics for
specific dash nos.
61
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Compliant Pin Connectors
AMPMODU Interconnection System
Application Tooling
3
Note: All part numbers are RoHS compliant.
BMEP MEP AEP 6T AEP 12T
System Type Benchtop Stand-Alone Stand-Alone Stand-Alone or
Semi-Automatic Press Semi-Automatic Press Automatic Press Inline Automatic Press
Force Capability Up to 5 Tons Up to 12 Tons Up to 6 Tons Up to 12 Tons
[44 kN] [107 kN] [53 kN] [107 kN]
Board Size Capability Up to 18" x 24" Up to 30" x 36" Up to 30" x 36" Up to 36" x 48"
[460x610 mm] [760x915 mm] [760x915 mm] [915x1220 mm]
Please contact the Tyco Tooling Assistance Center at 1-800-722-1111 for help with choosing the correct press and tooling to meet your application needs.
See Catalog 1309329 for more information on this equipment.
ASG Servo Electric Presses
for Compliant Pin
Connectors
Every Tyco Electronics ASG
servo press utilizes real-
time force and distance
monitoring and control.
This allows the press to
identify an error and react
throughout the press stroke.
Common problems such as
PCB holes above\below
specification and some-
times bent pins can be
detected by monitoring both
minimum and maximum
force parameters. Common
operator error such as
improperly placed connec-
tors, missing\incorrect con-
nector or tooling can also
be found by monitoring pre-
mature or missing force
parameters. In each case,
the system can stop during
the press cycle to avoid
costly scrap and rework.
Product Line Overview
Tyco Electronics offers the
ASG line of servo electric
presses for the application
of compliant pin products.
Systems are available in a
wide range of pressing
forces, board size capabili-
ties and automation levels
to meet almost any applica-
tions requirements. Each
system utilizes a servo elec-
tric motor with PC control.
Coupled with force and dis-
tance monitoring and con-
trol, the entire line provides
100% quality assurance in
real-time with SPC data col-
lection capabilities.
Automatic set up and a
graphical operator interface
help provide intuitive opera-
tion to help reduce common
and costly operator errors.
Press Force Monitoring for Scrap Avoidance
62
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Ribbon Cable Connectors
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Application Tooling
3
Manual Arbor Tool
Part No. 91085-2
Pneumatic Auto-Cycle
Tool Part No. 91112-3
These application tools are
designed for one-step
termination of ribbon cable
connectors to planar,
ground plane and
shielded/jacketed ribbon
cable on .025 [0.64]
centers. A complete set of
tooling consists of an Arbor
Tool (manual, Part No.
91085-2 or pneumatic,
Part No. 91112-3), a Base
Assembly, Part No.
768338-4 and a Connector
Specific Kit, Part No.
679167-1 (receptacle).
Technical Documents
Instruction Sheets
408-7777 — Manual Arbor Frame
Assembly
408-6732 — Pneumatic Auto-Cycle
Assembly
408-9827 — Universal Base Assembly,
Arbor Tool
408-9872 — Connector Specific Kit
for Receptacle Connectors (.025 [0.64]
Centerline Cable)
408-9928 — Connector Specific Kit
for Paddleboard Connectors (.025 [0.64]
Centerline Cable)
Note: Tooling is available for other
manufacturers’ manual arbor tools.
For information contact the
Tyco Electronics Technical Support
Center: 1-800-522-6752
63
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Performance Specifications
AMPMODU Interconnection System
Performance Characteristics
3
Performance Specifications
Board-to-Board, Board-to-Board, Cable-to-Board,
Description Thru-Hole Surface-Mount, Cable-to-Board, .025 [0.64] Centerline
Headers and Headers and .050 [1.27] Centerline Ribbon Cable
Receptacles Receptacles FFC Cable Receptacles Receptacles
Size Range-Single Row 4 thru 50 — 4 thru 50 —
Double Row 10 thru 100 10 thru 100 8 thru 100 10 thru 100
Current Rating (per contact) 1.0 amperes 1.0 amperes 1.5 amperes 0.5 amperes
Dielectric Withstanding Voltage 500 VAC 500 VAC 300 VAC 200 VAC
Insulation Resistance 5,000 Megohms 5,000 Megohms 5,000 Megohms 5,000 Megohms
Durability (tested to) 200 Cycles 200 Cycles 200 Cycles 150 Cycles
Mating Force (per contact) 5 oz. [1.38 N] Max. 5 oz. [1.38 N] Max. 8 oz. [2.22 N] Max. 4 oz. [1.11 N] Max.
Unmating Force (per contact) 0.8 oz. [0.22 N] Min. 0.8 oz. [0.22 N] Min. 1.0 oz. [0.27 N] Min. *0.5 oz. [0.13 N] Min.
Operating Temperature -65°C to +105°C -65°C to +105°C -55°C to +105°C -65°C to +105°C
*With latches depressed.
Need more information?
Call the Technical Support Center: 1-800-522-6752.
The Technical Support Center is staffed with specialists
well versed in all Tyco Electronics products. The Center
can provide you with:
■ Technical Support
■ Catalogs
■ Technical Documents
■ Product Samples
■ Tyco Electronics Authorized Distributor Locations
Board-to-Board Spacing
for Thru-Hole and
Surface-Mount Connector
Combinations
Thru-Hole Receptacle–
Thru-Hole Header
(Single and Double Row,
Shrouded and Unshrouded)
Thru-Hole Receptacle–
Surface-Mount Header
(Double Row, Shrouded)
Surface-Mount Receptacle–
Thru-Hole Header
(Double Row, Shrouded and
Unshrouded)
Surface-Mount Receptacle–
Surface-Mount Header
(Double Row, Shrouded)
64
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Technical Documents
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Technical Documents
3
The following is a list of technical documents covering the application, performance and
maintenance of AMPMODU System 50 connectors.
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineer.
108-1093—AMPMODU System 50 Interconnection System, Board-to-Board
108-1109—AMPLATCH System 50 Receptacle and Paddleboard Connector
108-16022—Connector System, .050 [1.27] Centerline FFC Cable
108-16025—Connector, ZIF-Line 50
108-16029—Shielded Flexible Flat Conductor Cable
108-40002—Flexible Flat Conductor Cable
Application Specifications describe requirements for using the product in its intended appli-
cation and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-16008—Multiple Crimp Contact for .050 [1.27] Centerline FFC and FEC Cable
114-16014—AMP ZIF-Line 50 & 100 PCB Connectors
114-25029—AMPMODU System 50 Ribbon Cable Connectors
114-25031—AMPMODU System 50 Thru-Hole Connectors
114-25035—AMPMODU Surface-Mount Connectors
114-25040—AMPMODU System 50 Paddleboard Connectors
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-6732—Pneumatic Arbor Tool, Part Number 91112-3 (Auto-Cycle)
408-7384—Extraction Tool, Part Number 91047
408-7763—Pneumatic Arbor Tool, Part Number 91112-2
408-7777—Manual Arbor Tool, Part Number 91085-2
408-7916—Extraction Tool, Part Number 91200
408-9827—Universal Base Assembly, Arbor Tool, Part Number 768338-1
408-9872—Connector Specific Kit, Part Number 679167-1, AMPMODU System 50
Receptacle Connectors (.025 [0.64] Centerline Cable)
408-9928—Connector Specific Kit, Part Number 679176-1, AMPMODU System 50
Paddleboard Connectors (.025 [0.64] Centerline Cable)
408-9564—Hand Crimping Tool Assembly, Part Number 90273-5
408-9719—FFC Contact Positioning Hand Tool Kit, Part Number 91292-1
65
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU 2mm Connectors (Board to Board)
AMPMODU Interconnection System
AMPMODU 2mm Connectors
(Board-to-Board)
4
METRIC
Dimensions are
millimeters over inches
AMPMODU 2mm connectors
reliably and economically
meet the packaging and
inter-connection
requirements of today’s
miniature sophisticated
electronics. They are ideal
for mobile and portable
personal computers and disk
drive applications. In today’s
marketplace, 2mm is
expanding over many other
industry segments due to
space constraints.
This versatile double-
row connector system is
comprised of various
straight and right-angle
posted headers for
thru-hole and surface
mounting and several
closed top-entry
receptacle assemblies
for vertical and horizontal
mounting. Headers and
receptacle assemblies are
available in selected sizes
ranging from 4 through
80 positions.
Thru-hole breakaway
headers feature brass
straight or right-angle
posts with a post length of
4.0 [.16] and a lead length
of 2.6 [.10].
The receptacle assemblies
employ phosphor bronze
contacts with dual canti-
lever beams and built-in
anti-overstress. This feature,
coupled with duplex
(gold/tin-lead) plating of
the header posts and
receptacle contacts,
provide superior electrical
performance as well as
excellent solderability.
Product Facts
■2.0 x 2.0 [.08 x .08]
centerline spacing
■Two-piece, double-row
connector system
■Unshrouded header styles
include; breakaway and
surface-mount
■All headers with 0.5 [.02]
square posted contacts
■Surface-mount connectors
compatible with standard
surface-mount processing
(VPR, IR)
■Closed top-entry
receptacle assemblies
include; vertical
mount and right-angle
■Receptacle contacts
employ dual cantilever
beams for two-point
electrical stability
■Duplex (gold/tin-lead)
plated posted contacts
and receptacle contacts
■Thermoplastic housing
material, UL 94V-0 rated
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
■Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
R
R
ISO
Certified
9001
66
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Headers, Unshrouded, Double Row, Thru-Hole, Vertical Mount
AMPMODU Interconnection System
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square
Straight Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57197
Packaging Method — Loose piece,
bag Dimensions Part Numbers
Position AB Reflow
240°C 265°C
44.0 [.16] 2.0 [.08] 1470213-4 1734508-4
66.0 [.24] 4.0 [.16] 1470213-6 1734508-6
88.0 [.32] 6.0 [.24] 1470213-8 1734508-8
10 10.0 [.39] 8.0 [.32] 1-1470213-0 1-1734508-0
12 12.0 [.47] 10.0 [.39] 1-1470213-2 1-1734508-2
14 14.0 [.55] 12.0 [.47] 1-1470213-4 1-1734508-4
16 16.0 [.63] 14.0 [.55] 1-1470213-6 1-1734508-6
18 18.0 [.71] 16.0 [.63] 1-1470213-8 1-1734508-8
20 20.0 [.79] 18.0 [.71] 2-1470213-0 2-1734508-0
22 22.0 [.87] 20.0 [.79] 2-1470213-2 2-1734508-2
24 24.0 [.94] 22.0 [.87] 2-1470213-4 2-1734508-4
26 26.0 [1.02] 24.0 [.94] 2-1470213-6 2-1734508-6
28 28.0 [1.10] 26.0 [1.02] 2-1470213-8 2-1734508-8
30 30.0 [1.18] 28.0 [1.10] 3-1470213-0 3-1734508-0
32 32.0 [1.26] 30.0 [1.18] 3-1470213-2 3-1734508-2
34 34.0 [1.34] 32.0 [1.26] 3-1470213-4 3-1734508-4
36 36.0 [1.42] 34.0 [1.34] 3-1470213-6 3-1734508-6
38 38.0 [1.50] 36.0 [1.42] 3-1470213-8 3-1734508-8
40 40.0 [1.57] 38.0 [1.50] 4-1470213-0 4-1734508-0
42 42.0 [1.65] 40.0 [1.57] 4-1470213-2 4-1734508-2
44 44.0 [1.73] 42.0 [1.65] 4-1470213-4 4-1734508-4
46 46.0 [1.81] 44.0 [1.73] 4-1470213-6 4-1734508-6
48 48.0 [1.89] 46.0 [1.81] 4-1470213-8 4-1734508-8
50 50.0 [1.97] 48.0 [1.89] 5-1470213-0 5-1734508-0
52 52.0 [2.05] 50.0 [1.97] 5-1470213-2 5-1734508-2
54 54.0 [2.13] 52.0 [2.05] 5-1470213-4 5-1734508-4
56 56.0 [2.20] 54.0 [2.13] 5-1470213-6 5-1734508-6
58 58.0 [2.28] 56.0 [2.20] 5-1470213-8 5-1734508-8
60 60.0 [2.36] 58.0 [2.28] 6-1470213-0 6-1734508-0
62 62.0 [2.44] 60.0 [2.36] 6-1470213-2 6-1734508-2
64 64.0 [2.52] 62.0 [2.44] 6-1470213-4 6-1734508-4
66 66.0 [2.60] 64.0 [2.52] 6-1470213-6 6-1734508-6
68 68.0 [2.68] 66.0 [2.60] 6-1470213-8 6-1734508-8
70 70.0 [2.76] 68.0 [2.68] 7-1470213-0 7-1734508-0
72 72.0 [2.83] 70.0 [2.76] 7-1470213-2 7-1734508-2
74 74.0 [2.91] 72.0 [2.83] 7-1470213-4 7-1734508-4
76 76.0 [2.99] 74.0 [2.91] 7-1470213-6 7-1734508-6
78 78.0 [3.07] 76.0 [2.99] 7-1470213-8 7-1734508-8
80 80.0 [3.15] 78.0 [3.07] 8-1470213-0 8-1734508-0
A±0.50
[±0.02]
B±0.10
[±.004]
0.50±0.02
[.02±.001] DIA TYP
4.00±0.15
[.157±.006]
4.00±0.15
[.157±.006]
2.00±0.15
[.079±.006]
2.00±0.15
[.079±.006]
2.60±0.02
[.102±.001]
1.50±0.15
[.059±.006]
B2.00±0.15
[.079±.006] TYP
2.00
[.079] TYP
0.80
[.031] DIA TYP
Recommended Solder Pad Layout
Note: All part numbers are RoHS
compliant.
67
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Headers, Unshrouded, Double Row, Thru-Hole, Right-Angle Mount
AMPMODU Interconnection System
AMPMODU .025 Square
Interconnection System
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square
Straight Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-O Rated, 265°C Process Capable
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57197
Packaging Method — Loose piece,
bag Position Dimensions Part Numbers
AB
44.0 [0.16] 2.0 [0.08] 1734507-4
66.0 [0.24] 4.0 [0.16] 1734507-6
88.0 [0.31] 6.0 [0.24] 1734507-8
10 10.0 [0.39] 8.0 [0.31] 1-1734507-0
12 12.0 [0.47] 10.0 [0.39] 1-1734507-2
14 14.0 [0.55] 12.0 [0.47] 1-1734507-4
16 16.0 [0.63] 14.0 [0.55] 1-1734507-6
18 18.0 [0.71] 16.0 [0.63] 1-1734507-8
20 20.0 [0.79] 18.0 [0.71] 2-1734507-0
22 22.0 [0.87] 20.0 [0.79] 2-1734507-2
24 24.0 [0.94] 22.0 [0.87] 2-1734507-4
26 26.0 [1.02] 24.0 [0.94] 2-1734507-6
28 28.0 [1.10] 26.0 [1.02] 2-1734507-8
30 30.0 [1.18] 28.0 [1.10] 3-1734507-0
32 32.0 [1.26] 30.0 [1.18] 3-1734507-2
34 34.0 [1.34] 32.0 [1.26] 3-1734507-4
36 36.0 [1.42] 34.0 [1.34] 3-1734507-6
38 38.0 [1.50] 36.0 [1.42] 3-1734507-8
40 40.0 [1.57] 38.0 [1.50] 4-1734507-0
42 42.0 [1.65] 40.0 [1.57] 4-1734507-2
44 44.0 [1.73] 42.0 [1.65] 4-1734507-4
46 46.0 [1.81] 44.0 [1.73] 4-1734507-6
48 48.0 [1.89] 46.0 [1.81] 4-1734507-8
50 50.0 [1.97] 48.0 [1.89] 5-1734507-0
52 52.0 [2.05] 50.0 [1.97] 5-1734507-2
54 54.0 [2.13] 52.0 [2.05] 5-1734507-4
56 56.0 [2.20] 54.0 [2.13] 5-1734507-6
58 58.0 [2.28] 56.0 [2.20] 5-1734507-8
60 60.0 [2.36] 58.0 [2.28] 6-1734507-0
62 62.0 [2.44] 60.0 [2.36] 6-1734507-2
64 64.0 [2.52] 62.0 [2.44] 6-1734507-4
66 66.0 [2.60] 64.0 [2.52] 6-1734507-6
68 68.0 [2.68] 66.0 [2.60] 6-1734507-8
70 70.0 [2.76] 68.0 [2.68] 7-1734507-0
72 72.0 [2.83] 70.0 [2.76] 7-1734507-2
74 74.0 [2.91] 72.0 [2.83] 7-1734507-4
76 76.0 [2.99] 74.0 [2.91] 7-1734507-6
78 78.0 [3.07] 76.0 [2.99] 7-1734507-8
80 80.0 [3.15] 78.0 [3.07] 8-1734507-0
A±0.50
[±0.02]
B±0.10
[±.004]
4.00±0.15
[.157±.006]
0.50±0.02
[.02±.001] DIA TYP
4.00±0.20
[.157±.008]
2.00±0.15
[.079±.006]
TYP
2.00
[.079]
TYP
2.00±0.15
[.079±.006]
2.00±0.15
[.079±.006]
2.00±0.20
[.079±.008]
B
0.80
[.031] DIA TYP
1.50±0.15
[.059±.006]
1.75±0.15
[.069±.006]
2.60±0.02
[.102±.001]
Recommended Solder Pad Layout
Note: All part numbers are RoHS
compliant.
68
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Right-Angle Mount
AMPMODU Interconnection System
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square
Right-Angle Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
A — 0.00020 [.000008] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
Packaging Method — Loose piece,
bag
0.5
[.02]DIA TYP
0.5
[.02]TYP
L
Tin-Lead
Plated
Area
2.0±0.08*
[.08±.003]
Typ.
Recommended PC Board Hole Layout
* Hole centerline to be 2.0±0.08 [.08±.003]; tolerances
not to accumulate within one connector pattern.
TYP TYP
TYP
TYP
DIA TYP
DIA TYP
DIA TYP
No. Dimensions Contact Plating
of Lead Length L = 2.6[.10]**
Positions AB AB
44.0 [0.16] 2.0 [0.08] 5176837-1 2-5176837-5
66.0 [0.24] 4.0 [0.16] 5176837-2 2-5176837-6
88.0 [0.31] 6.0 [0.24] 5176837-3 —
10 10.0 [0.39] 8.0 [0.31] 5176837-4 —
12 12.0 [0.47] 10.0 [0.39] 5176837-5 —
14 14.0 [0.55] 12.0 [0.47] 5176837-6 3-5176837-0
16 16.0 [0.63] 14.0 [0.55] 5176837-7 —
18 18.0 [0.71] 16.0 [0.63] — 3-5176837-2
20 20.0 [0.79] 18.0 [0.71] — 3-5176837-3
22 22.0 [0.87] 20.0 [0.79] — 3-5176837-4
26 26.0 [1.02] 24.0 [0.94] 1-5176837-2 —
30 30.0 [1.18] 28.0 [1.10] 1-5176837-4 —
32 32.0 [1.26] 30.0 [1.18] 1-5176837-5 3-5176837-9
34 34.0 [1.34] 32.0 [1.26] — 4-5176837-0
36 36.0 [1.42] 34.0 [1.34] — 4-5176837-1
38 38.0 [1.50] 36.0 [1.42] 1-5176837-8 4-5176837-2
40 40.0 [1.57] 38.0 [1.50] 1-5176837-9 5-5176837-2
42 42.0 [1.65] 40.0 [1.57] 2-5176837-0 4-5176837-4
44 44.0 [1.73] 42.0 [1.65] 2-5176837-1 —
46 46.0 [1.81] 44.0 [1.73] 2-5176837-2 4-5176837-6
48 48.0 [1.89] 46.0 [1.81] 2-5176837-3 4-5176837-7
50 50.0 [1.97] 48.0 [1.89] 2-5176837-4 4-5176837-8
69
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
AMPMODU Interconnection System
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square
Straight Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
Plating A — 0.00020 [.000008] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
Plating B — 0.00076 [.000030] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
Packaging Method — Loose piece,
bag
Dia. Typ.
L
Tin Plated
Area
2.0 ± 0.08*
[.08 ± .003]
Typ.
0.5
[.02] Typ.
0.5
[.02]
Recommended PC Board Hole Layout
* Hole centerline to be 2.0±0.08 [.08±.003]; tolerances
not to accumulate within one connector pattern.
4.0
[.16]
Dia. Typ.
Note: All part numbers are RoHS compliant.
70
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount (Continued)
AMPMODU Interconnection System
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square
Straight Posts
No. Dimensions Contact Plating
of
AB
Lead Length L = 1.5 [.06] Lead Length L = 2.6 [.10]
Positions Plating A Plating B Plating A Plating B
44.0 [0.16] 2.0 [0.08] 5178751-1 2-5178751-5 5176264-1 1-5176264-6
66.0 [0.24] 4.0 [0.16] — 2-5178751-6 5176264-2 1-5176264-7
88.0 [0.31] 6.0 [0.24] — 2-5178751-7 5176264-3 1-5176264-8
10 10.0 [0.39] 8.0 [0.31] 5178751-4 2-5178751-8 5176264-4 1-5176264-9
12 12.0 [0.47] 10.0 [0.39] — 2-5178751-9 5176264-5 2-5176264-0
14 14.0 [0.55] 12.0 [0.47] 5178751-6 3-5178751-0 5176264-6 2-5176264-1
16 16.0 [0.63] 14.0 [0.55] — 3-5178751-1 5176264-7 2-5176264-2
18 18.0 [0.71] 16.0 [0.63] 5178751-8 3-5178751-2 5176264-8 2-5176264-3
20 20.0 [0.79] 18.0 [0.71] 5178751-9 3-5178751-3 5176264-9 2-5176264-4
22 22.0 [0.87] 20.0 [0.79] 1-5178751-0 3-5178751-4 1-5176264-0 2-5176264-5
24 24.0 [0.94] 22.0 [0.87] 1-5178751-1 3-5178751-5 1-5176264-1 2-5176264-6
26 26.0 [1.02] 24.0 [0.94] 1-5178751-2 3-5178751-6 — —
28 28.0 [1.10] 26.0 [1.02] — 3-5178751-7 1-5176264-3 —
30 30.0 [1.18] 28.0 [1.10] 1-5178751-4 3-5178751-8 1-5176264-4 2-5176264-9
32 32.0 [1.26] 30.0 [1.18] 1-5178751-5 3-5178751-9 1-5176264-5 —
34 34.0 [1.34] 32.0 [1.26] 1-5178751-6 4-5178751-0 — 4-5176264-0
36 36.0 [1.42] 34.0 [1.34] 1-5178751-7 4-5178751-1 3-5176264-2 4-5176264-1
38 38.0 [1.50] 36.0 [1.42] 1-5178751-8 4-5178751-2 3-5176264-3 —
40 40.0 [1.57] 38.0 [1.50] 1-5178751-9 4-5178751-3 3-5176264-4 —
42 42.0 [1.65] 40.0 [1.57] 2-5178751-0 4-5178751-4 — —
44 44.0 [1.73] 42.0 [1.65] 2-5178751-1 4-5178751-5 3-5176264-6 4-5176264-5
46 46.0 [1.81] 44.0 [1.73] 2-5178751-2 4-5178751-6 — 4-5176264-6
48 48.0 [1.89] 46.0 [1.81] 2-5178751-3 4-5178751-7 — 4-5176264-7
50 50.0 [1.97] 48.0 [1.89] 2-5178751-4 4-5178751-8 3-5176264-9 4-5176264-8
71
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Header Assembly, AMPMODU
2mm SMT Vertical
4
METRIC
Dimensions are
millimeters over inches
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount
Note: All part numbers are RoHS compliant.
0.5 [.02] Square Straight
Posts
Material and Finish
Housing — Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.00020
[.000008] min. gold on contact area,
0.00200 [.000079] min. tin on solder
area, with entire contact underplated
0.00130 [.000051] min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-51001
Packaging Method — Tape & Reel
No. of Dimensions Part
Positions ABC
Numbers
44.0 [0.16] 2.0 [0.08] 4.0 [0.16] 5084476-1
66.0 [0.24] 4.0 [0.16] 6.0 [0.24] 5084476-2
12 12.0 [0.47] 10.0 [0.39] 5.0 [0.20] 5084476-7
16 16.0 [0.63] 14.0 [0.55] 8.0 [0.31] 5084476-3
A0.50±0.03
[.02±.002] TYP
B
1.00 [.04]
0.00
1.00 [.04]
4.20
[.17]
±0.05
[.003]
-0.00
2.00
[.08] TYP
0.50±0.02
[.02±.001] TYP
0.50±0.02
[.02±.001] TYP
1.40 MAX
[.06] TYP
C
4.20±0.05
[.17±.003]
0.50±0.02
[.02±.001]
TYP
D±0.25
[.01]
RO.50
REF
Tin-Lead
Plating Area
Vacuum Cap
1.50 [.06]
1.00 [.04]
2.00
[.08]
7.00±0.02
[.28±.001]
1.00±0.08
[.04±.003] TYP
1.50
[.06] TYP
2.60
[.10]
TYP
2.00
[.08] TYP
Recommended Solder Pad Layout
0.10
[.004]
B±0.08 [.003]
Tolerances Non-Cumulative
72
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
AMPMODU .025 Square
Interconnection System
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Straight
Posts
Material and Finish
Housing — Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.0076
[.000030] min. gold on contact area,
0.00254-0.00406 [.000100-.000160]
min. tin on solder area, with entire
contact underplated 0.00127 [.000050]
min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-18544
Packaging Method — Tape & Reel
No. of Dimensions Part
Positions ABC
Numbers
44.0 [0.16] 2.0 [0.08] 7.60 [0.30] 966926-2
66.0 [0.24] 4.0 [0.16] 9.60 [0.38] 966926-3
88.0 [0.31] 6.0 [0.24] 11.60 [0.46] 966926-4
10 10.0 [0.39] 8.0 [0.31] 13.60 [0.53] 966926-5
12 12.0 [0.47] 10.0 [0.39] 15.60 [0.61] 966926-6
14 14.0 [0.55] 12.0 [0.47] 17.60 [0.69] 966926-7
16 16.0 [0.63] 14.0 [0.55] 19.60 [0.77] 966926-8
18 18.0 [0.71] 16.0 [0.63] 21.60 [0.85] 966926-9
20 20.0 [0.79] 18.0 [0.71] 23.60 [0.93] 1-966926-0
22 22.0 [0.87] 20.0 [0.79] 25.60 [1.01] 1-966926-1
24 24.0 [0.94] 22.0 [0.87] 27.60 [1.09] 1-966926-2
A
6.5±0.25
[.256±.010]
B
3.8
[.150]
2.00
[.079] TYP
3.45
[.136]
0.9
[.035]
4.5
[.177]
0.50
[.02]
TYP
1.00±0.08
[.04±.003] TYP
0.50
[.020] TYP
3.75
[.148]
TYP
2.00
[.08] TYP
Recommended Solder Pad Layout
B±0.08 [.003]
Tolerances Non-Cumulative
C
73
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Stacking Header, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2.0 Pitch Vertical
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Straight
Posts
12 Position
Part Number 1734770-1
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
Gold flash all over contact underplated
0.00127 [.000050] min. nickel
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57331
Packaging Method — Loose piece,
bag
12.0
[.047]
10.0
[.039]
10.0
[.394]
9.75
[.384]
0.5±0.03
[0.02±.001]
0.8±0.05
[0.31±.002] DIA
12 Places
2.0
[.079] TYP
2.0
[.079] TYP
2.0
[.079]
2.0
[.079]
TYP
2.0
[.079]
4.0
[.157]
2.54
[.100]
2.54
[.100]
74
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2.0 Pitch Right-Angle
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Right-Angle
Posts
26 Position
Part Number 5084780-1
Material and Finish
Housing — High temperature, black
thermoplastic, UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00038 [.000015] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80 and 84
Product Specification
108-5296
Packaging Method — Tube
4.10
[.161]
6.30
[.248]
2.00
[.079]
2.00
[.079]
0.75
[.03]
2.54
[.100]
2.00
[.079]
2.325
[.092] 2 Places 2.00 24.00
12 Spaces x [.079] = [.945]
1.40
[.055]
+0.01
-0.05
+.000
-.002
4.80 +0.01/-0.22
[.189 +.004/-.009]
2.99
[.118]
+0.51
-0.25
+.02
-.01
Soldertail
27.15
[1.069]
+0.10
-0.05
+.004
-.002
6.65
[.262]
3.60
[.142]
28.65
[1.128]
0.50±0.03
[0.02±.001]
0.50±0.03
[0.02±.001]
6.40±0.20
[.252±.008]
2.00±0.05
[.079±.002] TYP
0.50 TYP at
[.079] Post Tips
0.50 TYP at
[.079] Post Tips
TYP at
Post Tips
2.00±0.05
[.079±.002] TYP
0.90±0.05
[.035±.002] TYP
3.60
[.142] TYP
Tolerance
Non-Cumulative
0.75
[.03] Ref.
0.50
[.02] Ref.
Recommended PCB Layout
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
75
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2.0 Pitch Right-Angle
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Right-Angle
Posts
Material and Finish
Housing — Natural color thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.00020 [.000008] min. gold on contact
area, with 0.00254 [.00010] tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80 and 84
Product Specification
108-57197
Packaging Method — Tubes
No. of Dimensions Part Numbers
Positions ABC
86.0 [0.24] 8.85 [0.35] 9.95 [0.39] 1734493-8
10 8.0 [0.31] 10.85 [0.43] 11.95 [0.47] 1-1734493-0
12 10.0 [0.39] 12.85 [0.51] 13.95 [0.55] 1-1734493-2
14 12.0 [0.47] 14.85 [0.58] 15.95 [0.63] 1-1734493-4
16 14.0 [0.55] 16.85 [0.66] 17.95 [0.71] 1-1734493-6
18 16.0 [0.63] 18.85 [0.74] 19.95 [0.79] 1-1734493-8
20 18.0 [0.71] 20.85 [0.82] 21.95 [0.86] 2-1734493-0
22 20.0 [0.79] 22.85 [0.90] 23.95 [0.94] 2-1734493-2
24 22.0 [0.87] 24.85 [0.98] 25.95 [1.02] 2-1734493-4
26 24.0 [0.94] 26.85 [1.06] 27.95 [1.10] 2-1734493-6
28 26.0 [1.02] 28.85 [1.14] 29.95 [1.18] 2-1734493-8
30 28.0 [1.10] 30.85 [1.21] 31.95 [1.26] 3-1734493-0
32 30.0 [1.18] 32.85 [1.29] 33.95 [1.34] 3-1734493-2
34 32.0 [1.26] 34.85 [1.37] 35.95 [1.42] 3-1734493-4
36 34.0 [1.34] 36.85 [1.45] 37.95 [1.49] 3-1734493-6
38 36.0 [1.42] 38.85 [1.53] 39.95 [1.57] 3-1734493-8
40 38.0 [1.50] 40.85 [1.61] 41.95 [1.65] 4-1734493-0
42 40.0 [1.57] 42.85 [1.69] 43.95 [1.73] 4-1734493-2
44 42.0 [1.65] 44.85 [1.77] 45.95 [1.81] 4-1734493-4
46 44.0 [1.73] 46.85 [1.84] 47.95 [1.89] 4-1734493-6
48 46.0 [1.81] 48.85 [1.92] 49.95 [1.97] 4-1734493-8
50 48.0 [1.89] 50.85 [2.00] 51.95 [2.05] 5-1734493-0
52 50.0 [1.97] 52.85 [2.08] 53.95 [2.12] 5-1734493-2
54 52.0 [2.05] 54.85 [2.16] 55.95 [2.20] 5-1734493-4
56 54.0 [2.13] 56.85 [2.34] 57.95 [2.28] 5-1734493-6
58 56.0 [2.20] 58.85 [2.32] 59.95 [2.36] 5-1734493-8
60 58.0 [2.28] 60.85 [2.40] 61.95 [2.44] 6-1734493-0
62 60.0 [2.36] 62.85 [2.47] 63.95 [2.52] 6-1734493-2
64 62.0 [2.44] 64.85 [2.55] 65.95 [2.60] 6-1734493-4
A ± 0.10
[± .004]
B ± 0.20
[± .008]
C ± 0.20
[± .008]
2.00 ± 0.05
[.079 ± .002]
2.00
[.079]
A
4.50 ± 0.15
[.177 ± .006]
3.00 ± 0.20
[.118 ± .008]
5.50 ± 0.15
[.217 ± .006]
0.50 ± 0.02
[.020 ± .001]
Ø 0.80
[.031]
Recommended PCB Layout
2.00 ± 0.10
[.079 ± .004]
5.60 ± 0.15
[.220 ± .006]
3.60 ± 0.20
[.142 ± .008]
6.65 ± 0.20
[.262 ± .008]
2.00 ± 0.10
[.079 ± .004]
2.40
[.094]
Sq.
Ty p .
2.00
[.079] Ty p .
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
(Continued)
76
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2.0 Pitch Vertical
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Posts
Material and Finish
Housing — Black color, PA9T (Nylon
9T), UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.00076 [.000003] min. gold on contact
area, with 0.00254 [.00010] matte tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Receptacles —
pages 80, 81, and 84
No. of Dimensions Part Numbers
Positions ABC
86.0 [0.24] 8.85 [0.35] 9.95 [0.39] 2041068-8
10 8.0 [0.31] 10.85 [0.43] 11.95 [0.47] 1-2041068-0
12 10.0 [0.39] 12.85 [0.51] 13.95 [0.55] 1-2041068-2
14 12.0 [0.47] 14.85 [0.58] 15.95 [0.63] 1-2041068-4
16 14.0 [0.55] 16.85 [0.66] 17.95 [0.71] 1-2041068-6
18 16.0 [0.63] 18.85 [0.74] 19.95 [0.79] 1-2041068-8
20 18.0 [0.71] 20.85 [0.82] 21.95 [0.86] 2-2041068-0
22 20.0 [0.79] 22.85 [0.90] 23.95 [0.94] 2-2041068-2
24 22.0 [0.87] 24.85 [0.98] 25.95 [1.02] 2-2041068-4
26 24.0 [0.94] 26.85 [1.06] 27.95 [1.10] 2-2041068-6
28 26.0 [1.02] 28.85 [1.14] 29.95 [1.18] 2-2041068-8
30 28.0 [1.10] 30.85 [1.21] 31.95 [1.26] 3-2041068-0
32 30.0 [1.18] 32.85 [1.29] 33.95 [1.34] 3-2041068-2
34 32.0 [1.26] 34.85 [1.37] 35.95 [1.42] 3-2041068-4
36 34.0 [1.34] 36.85 [1.45] 37.95 [1.49] 3-2041068-6
38 36.0 [1.42] 38.85 [1.53] 39.95 [1.57] 3-2041068-8
40 38.0 [1.50] 40.85 [1.61] 41.95 [1.65] 4-2041068-0
42 40.0 [1.57] 42.85 [1.69] 43.95 [1.73] 4-2041068-2
44 42.0 [1.65] 44.85 [1.77] 45.95 [1.81] 4-2041068-4
46 44.0 [1.73] 46.85 [1.84] 47.95 [1.89] 4-2041068-6
48 46.0 [1.81] 48.85 [1.92] 49.95 [1.97] 4-2041068-8
50 48.0 [1.89] 50.85 [2.00] 51.95 [2.05] 5-2041068-0
5.20
[.205] Ref.
2.40
[.094]
C
22.00
[.866]
4.50
[.177]
5.50
[.217]
6.50
[.256]
1.20
[.047]
8.00
[.315] Ref.
1.30
[.051] Ty p .
2.00
[..079] Pitch
7.50
[1.38]
2.00 ± 0.05
[.079 ± .001]
3.60 ± 0.15
[.142 ± .005]
2.00 ± 0.10
[.079 ± .004]
B
A
Pitch
.0.50
[.020]
5.60 ± 0.15
[.220 ± .006]
Ref. Cap
2.60 ± 0.15
[.102 ± .005]6.70 ± 0.25
[.264 ± .010]
1.00
[25.4]
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
Recommended PCB Layout
77
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacle Assemblies,
Double Row, Vertical Mount with
Vacuum Adapter Cap
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Straight
Posts
Material and Finish
Housing — Black high temperature
thermoplastic, UL 94 V-O Rated
Posted Contacts — Phosphor Bronze,
duplex plated as follows:
0.00076[0.000030] min. gold on contact
area, 0.00381[.000150] min. tin on
solder area, with entire contact
underplated 0.00127[.000050] min.
nickel
Product Specification
108-57328
Packaging Method — Tape and reel
No. of Dimensions Part Numbers
Positions ABCD
20 26.2 [1.03] 20.0 [0.79] 24.3 [0.96] 16.0 [.63] 2-1734569-0
30 36.2 [1.43] 30.0 [1.18] 34.3 [1.35] 26.0 [1.02] 3-1734569-0
Recommended PCB Layout
4.0
[.157]
3.6
[.142]
2.00
[.079]
2.00
[.079] 6.2
[.244]
1.91±0.05
[0.75±.002]
1.91±0.05
[0.75±.002] 2 Plc.
3.02
[.119]
4.50
[.177]
6.35
[.250]
7.04
[.277]
Vacuum Adapter Cap
D
D
A
B
C
2.00
[.079] TYP
2.00
[.079] TYP
0.51
[.020] TYP
1.2
[.047] TYP
1.14
[.045] TYP
1.20
[.047] 2 Plc.
1.09
[.043] 2 Plc. 1.4
[.055] 2 Plc.
7.56
[.298] TYP
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
(Continued)
78
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Headers, Shrouded, Double Row, Thru-Hole, Vertical Mount
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Box Header
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Straight
Posts with Cable Shroud
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, duplex
plated as follows:
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
Related Product Data
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
Product Specification
108-57217
Packaging Method — Loose piece,
bag
No. of Dimensions Part Numbers
Position ABC
64.0 [0.16] 8.0 [0.31] 6.74 [0.26] 1470109-6
86.0 [0.24] 10.0 [0.39] 8.74 [0.34] 1470109-8
10 8.0 [0.31] 12.0 [0.47] 10.74 [0.42] 1-1470109-0
12 10.0 [0.39] 14.0 [0.55] 12.74 [0.50] 1-1470109-2
14 12.0 [0.47] 16.0 [0.63] 14.74 [0.58] 1-1470109-4
16 14.0 [0.55] 18.0 [0.71] 16.74 [0.66] 1-1470109-6
18 16.0 [0.63] 20.0 [0.79] 18.74 [0.74] 1-1470109-8
20 18.0 [0.71] 22.0 [0.87] 20.74 [0.82] 2-1470109-0
22 20.0 [0.79] 24.0 [0.94] 22.74 [0.89] 2-1470109-2
24 22.0 [0.87] 26.0 [1.02] 24.74 [0.97] 2-1470109-4
26 24.0 [0.94] 28.0 [1.10] 26.74 [1.05] 2-1470109-6
28 26.0 [1.02] 30.0 [1.18] 28.74 [1.13] 2-1470109-8
30 28.0 [1.10] 32.0 [1.26] 30.74 [1.21] 3-1470109-0
32 30.0 [1.18] 34.0 [1.34] 32.74 [1.29] 3-1470109-2
Recommended PCB Layout
2.00
[.08] TYP
0.7±0.1
[.028±.004]
A
3.0±0.2
[.118±.008]
0.5±0.05
[.02±.002]
5.00
[1.97]
1.15
[.045]
2.0
[.079]
TYP
4.3
[.169]
6.5
[.256]
1.35
[.053] TYP
2.0
[.079] TYP
0.8
[.031]
3.5
[.138]
0.95
[.037] TYP
1.60
[0.63] TYP
B±0.3
[±.012]
A±0.25
[±.010]
C +0.2/-0.05
[+.008/-.002]
79
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Pitch Right-Angle Mount
4
METRIC
Dimensions are
millimeters over inches
0.5 [.02] Square Right-Angle
Posts with Cable Shroud
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, duplex
plated as follows:
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
Related Product Data
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
Product Specification
108-57217
Packaging Method — Loose piece,
bag
No. of Dimensions Part Numbers
Position ABC
64.0 [0.16] 8.00 [0.31] 6.74 [0.26] 1470108-6
86.0 [0.24] 10.00 [0.39] 8.74 [0.34] 1470108-8
10 8.0 [0.32] 12.00 [0.47] 10.74 [0.42] 1-1470108-0
12 10.0 [0.39] 14.00 [0.55] 12.74 [0.50] 1-1470108-2
14 12.0 [0.47] 16.00 [0.63] 14.74 [0.58] 1-1470108-4
16 18.0 [0.71] 18.00 [0.71] 16.74 [0.66] 1-1470108-6
18 14.0 [0.55] 20.00 [0.79] 18.74 [0.74] 1-1470108-8
20 16.0 [0.63] 22.00 [0.87] 20.74 [0.82] 2-1470108-0
22 22.0 [0.87] 24.00 [0.94] 22.74 [0.89] 2-1470108-2
24 20.0 [0.79] 26.00 [1.02] 24.74 [0.97] 2-1470108-4
26 24.0 [0.94] 28.00 [1.10] 26.74 [1.05] 2-1470108-6
28 28.0 [1.10] 30.00 [1.18] 28.74 [1.13] 2-1470108-8
30 26.0 [1.02] 32.00 [1.26] 30.74 [1.21] 3-1470108-0
32 30.0 [1.18] 34.00 [1.34] 32.74 [1.29] 3-1470108-2
Recommended PCB Layout
2.00
[.08] TYP
0.7±0.1
[.028±.004]
3.0±0.2
[.118±.008]
0.5±0.05
[.02±.002]
2.0±0.1
[.079±.004]
5.00
[1.97]
7.00
[.276]
7.00
[.276]
1.15
[.045]
.079
[2.0]
4.3
[.169]
9.5
[.374]
1.35
[.053] TYP
2.0
[.079] TYP
0.8
[.031]
3.5
[.138]
0.95
[.037] TYP
1.60
[0.63] TYP
B±0.3
[±.012]
A±0.25
[±.010]
C +0.2/-0.05
[+.008/-.002]
80
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2.0 Mount Type
w/PickUp
4
METRIC
Dimensions are
millimeters over inches
Part Numbers
No. of Dimensions Plating A Plating B
Positions AB
Dim. L Dim. L Dim. L Dim. L
1.2+/-0.1 2.6+/-0.1 1.2+/-0.1 2.6+/-0.1
(.047+/-.004) (.102+/-.004) (.047+/-.004) (.102+/-.004)
44.0 [.157] 2.0 [.079] 1470209-1 2-1470209-5 5-1470209-1 7-1470209-5
66.0 [.236] 4.0 [.157] 1470209-2 2-1470209-6 5-1470209-2 7-1470209-6
88.0 [.315] 6.0 [.236] 1470209-3 2-1470209-7 5-1470209-3 7-1470209-7
10 10.0 [.394] 8.0 [.315] 1470209-4 2-1470209-8 5-1470209-4 7-1470209-8
12 12.0 [.472] 10.0 [.394] 1470209-5 2-1470209-9 5-1470209-5 7-1470209-9
14 14.0 [.551] 12.0 [.472] 1470209-6 3-1470209-0 5-1470209-6 8-1470209-0
16 16.0 [.630] 14.0 [.551] 1470209-7 3-1470209-1 5-1470209-7 8-1470209-1
18 18.0 [.709] 16.0 [.630] 1470209-8 3-1470209-2 5-1470209-8 8-1470209-2
20 20.0 [.787] 18.0 [.709] 1470209-9 3-1470209-3 5-1470209-9 8-1470209-3
22 22.0 [.866] 20.0 [.787] 1-1470209-0 3-1470209-4 6-1470209-0 8-1470209-4
24 24.0 [.945] 22.0 [.866] 1-1470209-1 3-1470209-5 6-1470209-1 8-1470209-5
26 26.0 [1.024] 24.0 [.945] 1-1470209-2 3-1470209-6 6-1470209-2 8-1470209-6
28 28.0 [1.102] 26.0 [1.024] 1-1470209-3 3-1470209-7 6-1470209-3 8-1470209-7
30 30.0 [1.181] 28.0 [1.102] 1-1470209-4 3-1470209-8 6-1470209-4 8-1470209-8
32 32.0 [1.260] 30.0 [1.181] 1-1470209-5 3-1470209-9 6-1470209-5 8-1470209-9
34 34.0 [1.339] 32.0 [1.260] 1-1470209-6 4-1470209-0 6-1470209-6 9-1470209-0
36 36.0 [1.417] 34.0 [1.339] 1-1470209-7 4-1470209-1 6-1470209-7 9-1470209-1
38 38.0 [1.496] 36.0 [1.417] 1-1470209-8 4-1470209-2 6-1470209-8 9-1470209-2
40 40.0 [1.575] 38.0 [1.496] 1-1470209-9 4-1470209-3 6-1470209-9 9-1470209-3
42 42.0 [1.654] 40.0 [1.575] 2-1470209-0 4-1470209-4 7-1470209-0 9-1470209-4
44 44.0 [1.732] 42.0 [1.654] 2-1470209-1 4-1470209-5 7-1470209-1 9-1470209-5
46 46.0 [1.811] 44.0 [1.732] 2-1470209-2 4-1470209-6 7-1470209-2 9-1470209-6
48 48.0 [1.890] 46.0 [1.811] 2-1470209-3 4-1470209-7 7-1470209-3 9-1470209-7
50 50.0 [1.969] 48.0 [1.890] 2-1470209-4 4-1470209-8 7-1470209-4 9-1470209-8
Receptacle, Thru-Hole,
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated, 245°C Reflow
Contacts — Copper alloy, plated as
follows:
A— 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B— 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Headers —
pages 66-76, 78, 79
Product Specification
108-57197
Packaging Method — Tray
0.5
[.02]
0.5
[.02]
2.0±0.05
[.079±.002] TYP
2.0±0.1
[.079±.004] TYP
0.75±0.05
[.030±.002] TYP
0.20
[.008] TYP
1.67
[.066] Ref.
2.0±0.05
[.079±.002]
TYP
2.0±0.1
[.079±.004] 4.00
[.157]
4.50
[.177]
0.36
[.014]
B±0.2
[±.008]
L±0.1
[±.004]
A±0.25
[±.01]
Recommended PCB Layout
81
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount (Continued)
AMPMODU Interconnection System
2.0 Mount Type
w/PickUp
4
METRIC
Dimensions are
millimeters over inches
Note: All part numbers are RoHS compliant.
Part Numbers
No. of Dimensions Plating A Plating B
Positions AB
Dim. L Dim. L Dim. L Dim. L
1.2+/-0.1 2.6+/-0.1 1.2+/-0.1 2.6+/-0.1
(.047+/-.004) (.102+/-.004) (.047+/-.004) (.102+/-.004)
44.0 [.157] 2.0 [.079] 1734506-1 2-1734506-5 5-1734506-1 7-1734506-5
66.0 [.236] 4.0 [.157] 1734506-2 2-1734506-6 5-1734506-2 7-1734506-6
88.0 [.315] 6.0 [.236] 1734506-3 2-1734506-7 5-1734506-3 7-1734506-7
10 10.0 [.394] 8.0 [.315] 1734506-4 2-1734506-8 5-1734506-4 7-1734506-8
12 12.0 [.472] 10.0 [.394] 1734506-5 2-1734506-9 5-1734506-5 7-1734506-9
14 14.0 [.551] 12.0 [.472] 1734506-6 3-1734506-0 5-1734506-6 8-1734506-0
16 16.0 [.630] 14.0 [.551] 1734506-7 3-1734506-1 5-1734506-7 8-1734506-1
18 18.0 [.709] 16.0 [.630] 1734506-8 3-1734506-2 5-1734506-8 8-1734506-2
20 20.0 [.787] 18.0 [.709] 1734506-9 3-1734506-3 5-1734506-9 8-1734506-3
22 22.0 [.866] 20.0 [.787] 1-1734506-0 3-1734506-4 6-1734506-0 8-1734506-4
24 24.0 [.945] 22.0 [.866] 1-1734506-1 3-1734506-5 6-1734506-1 8-1734506-5
26 26.0 [1.024] 24.0 [.945] 1-1734506-2 3-1734506-6 6-1734506-2 8-1734506-6
28 28.0 [1.102] 26.0 [1.024] 1-1734506-3 3-1734506-7 6-1734506-3 8-1734506-7
30 30.0 [1.181] 28.0 [1.102] 1-1734506-4 3-1734506-8 6-1734506-4 8-1734506-8
32 32.0 [1.260] 30.0 [1.181] 1-1734506-5 3-1734506-9 6-1734506-5 8-1734506-9
34 34.0 [1.339] 32.0 [1.260] 1-1734506-6 4-1734506-0 6-1734506-6 9-1734506-0
36 36.0 [1.417] 34.0 [1.339] 1-1734506-7 4-1734506-1 6-1734506-7 9-1734506-1
38 38.0 [1.496] 36.0 [1.417] 1-1734506-8 4-1734506-2 6-1734506-8 9-1734506-2
40 40.0 [1.575] 38.0 [1.496] 1-1734506-9 4-1734506-3 6-1734506-9 9-1734506-3
42 42.0 [1.654] 40.0 [1.575] 2-1734506-0 4-1734506-4 7-1734506-0 9-1734506-4
44 44.0 [1.732] 42.0 [1.654] 2-1734506-1 4-1734506-5 7-1734506-1 9-1734506-5
46 46.0 [1.811] 44.0 [1.732] 2-1734506-2 4-1734506-6 7-1734506-2 9-1734506-6
48 48.0 [1.890] 46.0 [1.811] 2-1734506-3 4-1734506-7 7-1734506-3 9-1734506-7
50 50.0 [1.969] 48.0 [1.890] 2-1734506-4 4-1734506-8 7-1734506-4 9-1734506-8
40* 40.0 [1.575] 38.0 [1.496] — 4-1734506-9 — 9-1734506-9
*Keying position 6.
Receptacle, Thru-Hole,
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated, 265°C Process Capable
Contacts — Copper alloy, plated as
follows:
A— 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B— 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
Related Product Data
Mateable Headers —
pages 66-76, 78, 79
Product Specification
108-57197
Packaging Method — Tray
0.5
[.02]
0.5
[.02]
2.0±0.05
[.079±.002] TYP
2.0±0.1
[.079±.004] TYP
0.75±0.05
[.030±.002] TYP
0.20
[.008] TYP
1.67
[.066] Ref.
2.0±0.05
[.079±.002]
TYP
2.0±0.1
[.079±.004] 4.00
[.157]
4.50
[.177]
0.36
[.014]
B±0.2
[±.008]
L±0.1
[±.004]
A±0.25
[±.01]
Recommended PCB Layout
Position Dimensions Part Numbers
AB
66.20 [.244] 4.0 [.157] 1734606-6
88.20 [.323] 6.0 [.236] 1734606-8
10 10.20 [.402] 8.0 [.315] 1-1734606-0
12 12.20 [.480] 10.0 [.394] 1-1734606-2
14 14.20 [.559] 12.0 [.472] 1-1734606-4
16 16.20 [.638] 14.0 [.551] 1-1734606-6
18 18.20 [.717] 16.0 [.630] 1-1734606-8
20 20.20 [.795] 18.0 [.709] 2-1734606-0
22 22.20 [.874] 20.0 [.787] 2-1734606-2
24 24.20 [.953] 22.0 [.866] 2-1734606-4
26 26.20 [1.031] 24.0 [.945] 2-1734606-6
28 28.20 [1.110] 26.0 [1.024] 2-1734606-8
30 30.20 [1.189] 28.0 [1.102] 3-1734606-0
32 32.20 [1.268] 30.0 [1.181] 3-1734606-2
34 34.20 [1.346] 32.0 [1.260] 3-1734606-4
36 36.20 [1.425] 34.0 [1.339] 3-1734606-6
38 38.20 [1.504] 36.0 [1.417] 3-1734606-8
40 40.20 [1.583] 38.0 [1.496] 4-1734606-0
42 42.20 [1.661] 40.0 [1.575] 4-1734606-2
44 44.20 [1.740] 42.0 [1.654] 4-1734606-4
46 46.20 [1.819] 44.0 [1.732] 4-1734606-6
48 48.20 [1.898] 46.0 [1.811] 4-1734606-8
50 50.20 [1.976] 48.0 [1.890] 5-1734606-0
82
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Receptacle, Double Row, Surface Mount, Right-Angle Mount
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2mm Receptacle
4
METRIC
Dimensions are
millimeters over inches
Receptacle, Surface Mount,
Right-Angle
Material and Finish
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00229 [.000090] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
Related Product Data
Mateable Headers — pages 66-73
Product Specification
108-57197
Packaging Method — Tape and reel
1.00
[.039] TYP
0.60±0.05
[.024±.002] TYP
0.15±0.03
[.006±.001]
5.0±0.2
[.197±.008]
4.90±0.25
[.193±.01]
4.90±0.25
[.193±.01]
8.30±0.5
[.327±.02]
2.00±0.05
[.079±.002]
4.00
[.157]
2.00
[.079]
4.00
[.157] TYP
2.00
[.079] TYP
9.00
[.354]
0.90
[.035]
B
1.10
[.042] TYP
B±0.10
[±.004]
A±0.25
[±.01]
Recommended PCB Layout
Position Dimensions Part Numbers
AB
86.0 [.236] 8.50 [.335] 1734531-8
10 8.0 [.315] 10.50 [.413] 1-1734531-0
12 10.0 [.394] 12.50 [.492] 1-1734531-2
14 12.0 [.472] 14.50 [.571] 1-1734531-4
16 14.0 [.551] 16.50 [.650] 1-1734531-6
18 16.0 [.630] 18.50 [.728] 1-1734531-8
20 18.0 [.709] 20.50 [.807] 2-1734531-0
22 20.0 [.787] 22.50 [.886] 2-1734531-2
24 22.0 [.866] 24.50 [.965] 2-1734531-4
26 24.0 [.945] 26.50 [1.043] 2-1734531-6
28 26.0 [1.024] 28.50 [1.122] 2-1734531-8
30 28.0 [1.102] 30.50 [1.201] 3-1734531-0
32 30.0 [1.181] 32.50 [1.280] 3-1734531-2
34 32.0 [1.260] 34.50 [1.358] 3-1734531-4
36 34.0 [1.339] 36.50 [1.437] 3-1734531-6
38 36.0 [1.417] 38.50 [1.516] 3-1734531-8
40 38.0 [1.496] 40.50 [1.594] 4-1734531-0
42 40.0 [1.575] 42.50 [1.673] 4-1734531-2
44 42.0 [1.654] 44.50 [1.752] 4-1734531-4
46 44.0 [1.732] 46.50 [1.831] 4-1734531-6
48 46.0 [1.811] 48.50 [1.909] 4-1734531-8
50 48.0 [1.890] 50.50 [1.988] 5-1734531-0
52 50.0 [1.969] 52.50 [2.067] 5-1734531-2
54 52.0 [2.047] 54.50 [2.146] 5-1734531-4
56 54.0 [2.123] 56.50 [2.224] 5-1734531-6
58 56.0 [2.205] 58.50 [2.303] 5-1734531-8
60 58.0 [2.283] 60.50 [2.381] 6-1734531-0
62 60.0 [2.362] 62.50 [2.461] 6-1734531-2
64 62.0 [2.441] 64.50 [2.539] 6-1734531-4
66 64.0 [2.520] 66.50 [2.618] 6-1734531-6
68 66.0 [2.598] 68.50 [2.697] 6-1734531-8
70 68.0 [2.677] 70.50 [2.776] 7-1734531-0
72 70.0 [2.756] 72.50 [2.854] 7-1734531-2
74 72.0 [2.834] 74.50 [2.933] 7-1734531-4
76 74.0 [2.913] 76.50 [3.012] 7-1734531-6
78 76.0 [2.992] 78.50 [3.091] 7-1734531-8
80 78.0 [3.071] 80.50 [3.169] 8-1734531-0
83
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Receptacle, Double Row, Thru-Hole, Right-Angle Mount
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2mm Receptacle
4
METRIC
Dimensions are
millimeters over inches
Receptacle, Thru-Hole,
Right-Angle
Material and Finish
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00254 [.000100] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
Related Product Data
Mateable Headers — pages 66-73
Product Specification
108-57197
Packaging Method — Tube
2±0.15
[.079±.006]
2±0.05
[.079±.002]
3±0.02
[.118±.001]
7.2±0.15
[.283±.006]
4.85±0.15
[.191±.006]
1.5±0.05
[.059±.002]
0.5±0.05
[.02±.002]
0.2±0.03
[.008±.001]
0.35
[.014]
1.45
[.057]
5.2
[.205] 2.00
[.079]
2.00
[.079]
TYP
2.00
[.079]
TYP
A±0.10
[±.004]
A
A
A
B±0.20
[±.008]
Recommended PCB Layout
Section A-A
.080
[.031] DIA TYP
Receptacle, Top Entry,
Surface Mount
Material and Finish
Housing—Black Thermoplastic,
UL 94V-0 Rated
Contact—Copper Alloy, plated 0.00076
[.000030] Min. Gold Plated on Contact
Area, 0.00254 [.000100] Tin Plated on
Solder Tail, Underplated 0.00127
[.000050] Nickel
Cap—Thermoplastic
Related Product Data
Mateable Headers—pages 66-75,
78, 79
Product Specification
108-57227
Packaging Method—Tape and reel
Dimensions 245C Reflow Part Numbers 265C Reflow Part Numbers
Position A B with Alignment Peg* without Alignment Peg with Alignment Peg* without Alignment Peg
86.0 [.236] 8.40 [.331] 1734516-8 5-1734516-8 2041069-8 5-2041069-8
10 8.0 [.315] 10.40 [.409] 1-1734516-0 6-1734516-0 1-2041069-0 6-2041069-0
12 10.0 [.394] 12.40 [.488] 1-1734516-2 6-1734516-2 1-2041069-2 6-2041069-2
14 12.0 [.472] 14.40 [.567] 1-1734516-4 6-1734516-4 1-2041069-4 6-2041069-4
16 14.0 [.551] 16.40 [.646] 1-1734516-6 6-1734516-6 1-2041069-6 6-2041069-6
18 16.0 [.630] 18.40 [.724] 1-1734516-8 6-1734516-8 1-2041069-8 6-2041069-8
20 18.0 [.709] 20.40 [.803] 2-1734516-0 7-1734516-0 2-2041069-0 7-2041069-0
22 20.0 [.787] 22.40 [.881] 2-1734516-2 7-1734516-2 2-2041069-2 7-2041069-2
24 22.0 [.866] 24.40 [.961] 2-1734516-4 7-1734516-4 2-2041069-4 7-2041069-4
26 24.0 [.945] 26.40 [1.039] 2-1734516-6 7-1734516-6 2-2041069-6 7-2041069-6
28 26.0 [1.024] 28.40 [1.118] 2-1734516-8 7-1734516-8 2-2041069-8 7-2041069-8
30 28.0 [1.102] 30.40 [1.197] 3-1734516-0 8-1734516-0 3-2041069-0 8-2041069-0
32 30.0 [1.181] 32.40 [1.276] 3-1734516-2 8-1734516-2 3-2041069-2 8-2041069-2
34 32.0 [1.260] 34.40 [1.354] 3-1734516-4 8-1734516-4 3-2041069-4 8-2041069-4
36 34.0 [1.339] 36.40 [1.433] 3-1734516-6 8-1734516-6 3-2041069-6 8-2041069-6
38 36.0 [1.417] 38.40 [1.512] 3-1734516-8 8-1734516-8 3-2041069-8 8-2041069-7
40 38.0 [1.496] 40.40 [1.591] 4-1734516-0 9-1734516-0 4-2041069-0 9-2041069-0
*See views 1a and 1b
Recommended PCB Layout
1b
A
2.00
[.079] TYP
1.12
[.044]
2.25
[.089]
6.00
[.236]
Cavity Mark
Location
Alignment Peg 2
Plc. Ref.
0.96±0.10
[.038±.004]
2.00±0.05
[.079±.002]
A+2.00±0.10
[.079±.004]
A+2.00
[+.079]
0.85±0.05
[.033±.002] DIA TYP
2 Plc.
8.00±0.15
[.315±.006]
4.25±0.15
[.167±.006]
B—8.00/2.00±2.00
[.315/.079±.079]
4.80±0.15
[.189±.006] 4.70+0.25
-0.13
[.185+0.01]
-.005
5.10±0.50
[.201±.020]
0.20±0.03
[.008±.001]
2.00±0.05
[.079±.002]
2.00
[.079]
0.50±0.05
[.020±.002]
0.40±0.05
[.016±.002] 2 Plc.
4.00±0.15
[.157±.006]
B±0.20
[±.008]
X
X6.00±0.15
[.236±.006]
0.71±0.05
[.028±.002]
A±0.10
[±.004]
1a
Recommended PCB Layout
(Without Alignment Peg)
A
2.00
[.079] TYP
1.12
[.044]
2.25
[.089]
6.00
[.236]
84
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
2mm Receptacle, Double Row, Surface Mount, Vertical Mount
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
2mm Receptacle
4
METRIC
Dimensions are
millimeters over inches
