HN2S03T TOSHIBA Diode Silicon Epitaxial Schottky Barrier Type HN2S03T Unit: mm High Speed Switching Application 1.20.05 Two independent diodes are mounted on Thin Extreme Super Mini Quad package that are suitable for higher mounting densities. : IR= 0.5A (max) Small total capacitance : CT = 3.9pF (typ.) 1 4 2 3 Maximum (peak) reverse Voltage Symbol Rating Unit VRM 25 V Reverse voltage VR 20 V Maximum (peak) forward current IFM 100 * mA Average forward current IO 50 * mA Surge current (10ms) IFSM 1* A Power dissipation P 70 ** mW Junction temperature Tj 125 C Storage temperature range Tstg -55125 C Operating temperature range Topr -40100 C * : Unit rating. **: Total rating 0.520.05 Characteristic 0.120.05 Maximum Ratings (Q1, Q2 Common, Ta = 25C) TESQ 0.20.05 Low reverse current 0.80.05 : VF (3) = 0.50V (typ.) 1.20.05 Low forward voltage 0.90.05 1. 2. 3. 4. ANODE1 ANODE2 CATHODE2 CATHODE1 JEDEC JEITA TOSHIBA Weight: 1.5mg(Typ.) Total rating = Unit rating x 1.5 Electrical Characteristics (Q1, Q2 Common, Ta = 25C) Symbol Test Circuit VF (1) VF (2) VF (3) Reverse current Total capacitance Characteristic Forward voltage Test Condition Min Typ. Max IF = 1mA 0.33 IF = 5mA 0.38 IF = 50mA 0.50 0.55 IR VR = 20V 0.5 A CT VR = 0, f = 1MHz 3.9 pF 1 Unit V 2004-02-27 HN2S03T Pin Assignment (Top View) 3 4 Marking 4 Q1 3 A7 Q2 1 2 P - Ta (mW) 2 COLLECTOR POWER DISSIPATION PC 1 100 80 60 40 0 0 25 50 75 100 AMBIENT TEMPERATURE 2 125 Ta 150 175 (C) 2004-02-27 HN2S03T RESTRICTIONS ON PRODUCT USE 030619EAA * The information contained herein is subject to change without notice. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 3 2004-02-27