MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES * The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4. * Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection). * Plugs have an easy-to-use ejection mechanism. * Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. * In addition to connectors for type I and type II cards, a connector for type III cards has been provided. * The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available. PIN CONNECTOR (PLUG) CONTACT LENGTH SPECIFICATIONS Contact type Specification Item Pin No. Contact length Operating temperature range - 55C to + 85C Power, ground pins 1, 17, 34, 35, 51, 68 Current rating DC 0.5 A Card detection pins 36, 67 3.5 mm (0.137 in.) Voltage rating AC 250 V Other signal pins Others 4.25 mm (0.167 in.) Contact resistance 40 m max (6 VDC, 0.1 A) Insulation resistance 1000 M min. (500 VDC) Dielectric withstanding voltage 500 VAC for 1 minute Insertion/withdrawal life Industrial environment: 5,000 times Office environment: 10,000 times 5.0 mm (0.196 in.) MATERIALS Specification Item Plug body: PPS resin UL94V-0 Insulating material : 6T nylon (for type III card connector) UL94V-0 Ejector: Polyester : PPS resin (for SMT and type III card connectors) Specifications subject to change Conductor Copper alloy Plating Contact: Gold over palladium over nickel (PAGOS) Terminal: Palladium Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE) SUPPORTS TYPE I, II CARDS DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 50.8 (2) 2.42 (0.095) 4.25 (0.167) 3.5 (0.138) 35.2 (1.39) 1 (0.039) 11.2 (0.44) 2.5mm (0.098) deep spot facing 41.91 (1.65) 1.27 (0.05) 2- o 2.8 (0.110) 5 (0.197) 3.810 (0.15) 3 (0.118) 1.905 (0.075) 5.715 (0.225) 0.51 (0.02) Part number: FCN-565P068-G/C-V4 59.7(2.35) 1.27 (0.05) 4 (0.157) No.2 1.27 (0.05) No.17 No.1 50.8 (2) 0.1 (0.0039) No.1 41.91 (1.65) 7 (0.276) No.34 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 No.51 1.905 (0.075) 0.05 (0.0020) 3.810 (0.15) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) No.68 No.35 Unit: mm (in.) No.68 68- o 1 (0.039)0.05 (0.0020) 2- o 2.8 (0.110)0.1 (0.0039) (Card insertion side) * Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board) FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board) * Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.)) FCN-565P068-G/02-V4 (10 mm (0.394 in.)) * Models which support Type III are also available. Part number: FCN-565P068-G/17-V4 FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board ) RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE)) SUPPORTS TYPE I, II CARDS DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 42 (1.65) 24.9 (0.98) 12.2 (0.48) ) 3 (0.118) 1.51 (0.059) 2.5mm (0.098) deep spot facing 1.27 (0.05) 11 (0. 1.905 (0.075) 1.27 (0.05) x (34-1) = 41.91 (1.65) .8 3.810 (0.15) 50.8 (2) 4 (0.157) o2 3 (0.118) 2- 5.715 (0.225) Part number: FCN-565P068-G/01-V4 3.6 (0.141) 58.7 (2.31) 1.27 (0.05) 1.27 (0.05) x (34-1) = 41.91 (1.65) No.1 No.2 1.27 (0.05) No.1 No.34 No.35 No.68 50.8 (2) 0.1 (0.0039) 41.91(1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 No.68 1.905 (0.075) 0.05 (0.0020) 3.810 (0.15) 0.05 (0.0020) 68- o 1 (0.039) 0.05 (0.0020) 0.05 (0.0020) 5.715 (0.225) 2- o 2.8 (0.110)0.1 (0.0039) (Card insertion side) Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm. In order to avoid damage to the connector, do not pull out the card at an angle. Specifications subject to change Dimensions are in millimeters (inches) Unit: mm (in.) www.fcai.fujitsu.com 2 560H Series Connector Conforming to Ver. 4 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 3