HG 140 PTC Heater 15 - 150W Compact size Wide voltage range Heating power adjusts to ambient temperature Cage clamp connectors for quick & easy wiring These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value. The aluminum profile heater body design has a chimney effect to distribute heat evenly. The cage clamp connectors save time and simplify installation. Heating DIN rail mountable | Technical Data Operating voltage* 120-240V AC/DC (min. 110V, max. 265V) Heating element PTC resistor - temperature limiting Heater body extruded aluminum profile, anodized Connection 3 cage clamps for solid wire AWG 20-14 (0.5-2.5mm), and stranded wire AWG 20-16 (0.5-1.5mm) with wire end ferrule Connection casing plastic, UL 94V-0, black Mounting clip for 35mm DIN rail, EN 60 715 Mounting position vertical Operating / Storage temperature -49 to +158F (-45 to +70C) Protection class I (grounded) Protection type IP20 Approvals UL File No. E150057, VDE Note other voltages available upon request 1) at Part No. Heating capacity1) Max. current (inrush) Length (L) Weight (approx.) 14000.0-00 15W 1.5A 2.56" (65mm) 10.6 oz. (300g) 14001.0-00 30W 3.0A 2.56" (65mm) 10.6 oz. (300g) 14003.0-00 45W 3.5A 2.56" (65mm) 10.6 oz. (300g) 14005.0-00 60W 2.5A 5.5" (140mm) 14.1 oz. (400g) 14006.0-00 75W 4.0A 5.5" (140mm) 17.6 oz. (500g) 14007.0-00 100W 4.5A 5.5" (140mm) 17.6 oz. (500g) 14008.0-00 150W 9.0A 8.66" (220mm) 24.7 oz. (700g) 68F (20C) ambient temperature Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application. STEGO, Inc. * 1395 South Marietta Parkway * Building 800 * Marietta, GA 30067 * Tel: (770) 984-0858 * Fax: (770) 984-0615 Toll free: 1-888-783-4611 (US & Canada only) * www.stegousa.com HG140/2-09/08 *Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.