Technical Data
Heating
||
HG140/2-09/08
Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: (770) 984-0858 · Fax: (770) 984-0615
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
HG 140 PTC Heater 15 - 150W
Compact size
Wide voltage range
Heating power adjusts to ambient temperature
Cage clamp connectors for quick & easy wiring
DIN rail mountable
These heaters are used in enclosures where damage from condensation must be prevented, or
where the temperature must be maintained above a minimum value. The aluminum profile
heater body design has a chimney effect to distribute heat evenly. The cage clamp connectors
save time and simplify installation.
Operating voltage* 120-240V AC/DC (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminum profile, anodized
Connection 3 cage clamps for solid wire AWG 20-14 (0.5-2.5mm²), and
stranded wire AWG 20-16 (0.5-1.5mm²) with wire end ferrule
Connection casing plastic, UL 94V-0, black
Mounting clip for 35mm DIN rail, EN 60 715
Mounting position vertical
Operating / Storage temperature -49 to +158°F (-45 to +70°C)
Protection class I(grounded)
Protection type IP20
Approvals UL File No. E150057, VDE
Note other voltages available upon request
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Part No. Heating capacity1) Max. current (inrush) Length (L) Weight (approx.)
14000.0-00 15W 1.5A 2.56” (65mm) 10.6 oz. (300g)
14001.0-00 30W 3.0A 2.56” (65mm) 10.6 oz. (300g)
14003.0-00 45W 3.5A 2.56” (65mm) 10.6 oz. (300g)
14005.0-00 60W 2.5A 5.5” (140mm) 14.1 oz. (400g)
14006.0-00 75W 4.0A 5.5” (140mm) 17.6 oz. (500g)
14007.0-00 100W 4.5A 5.5” (140mm) 17.6 oz. (500g)
14008.0-00 150W 9.0A 8.66” (220mm) 24.7 oz. (700g)
1) at 68°F (20°C) ambient temperature
