FLDWC0311
Issue 5
8th February 2012
Page 1 of 2
Page 2 is for internal use only
Insulation Thickness: 0.10mm (minimum)
0.127mm (minimum average)
Conductor
Jacket
Tin Plated Copper Radiation Crosslinked Modified (PVDF)
Jacket Thickness -
0.05mm (minimum)
0.076mm (minimum average)
Part Nominal Stranding Diameter Maximum Diameter (mm) Nominal
CSA
No./Diam.
(mm) Resistance Lower Upper Weight
(mm²) (mm) @20°C Spec
Target
Spec (kg/km) Mandrel Diam. Weight
Min. Max. (ohms/km) Limit Limit (mm) (±3%) (kg) (±3%)
FLDWC0311-0.25-* 0.25 19/0.127 0.55 0.63 83.3 1.12 1.17 1.22 3.45 13 0.17
FLDWC0311-0.35-* 0.35 19/0.15 0.72 0.77 56.1 1.31 1.37 1.42 4.79 19 0.17
FLDWC0311-0.50-* 0.50 19/0.19 0.86 0.88 40.1 1.46 1.51 1.56 6.46 19 0.23
FLDWC0311-0.75-* 0.75 19/0.23 1.05 1.08 24.7 1.65 1.70 1.75 8.93 25 0.23
FLDWC0311-1.00-* 1.00 19/0.25 1.17 1.26 20.0 1.78 1.85 1.93 10.9 25 0.23
FLDWC0311-1.50-* 1.50 19/0.32 1.35 1.58 13.7 2.19 2.27 2.34 17.9 30 0.45
FLDWC0311-2.00-* 2.00 19/0.36 1.66 1.79 9.7 2.42 2.52 2.62 21.3 38 0.45
2.50 19/0.41 1.85 2.01 8.2 2.63 2.73 2.83 27.4 50 0.68
WIRE RATINGS:
Voltage Rating :- 600 Volts (rms)
Flame Rating :- VW1
COLOUR CODE:
The '*' in the part number shall be replaced by a standard colour code designator.
e.g., FLDWC0311-1.50-9, 1.50mm², white insulation
ADDITIONAL
Crosslink Verification:
300 ±3°C/1 hr. as per WCD3106 clause 3.4.7; voltage withstand - 2.5 kV;
REQUIREMENTS:
mandrels & weights as shown above.
Insulation Tensile Strength:
17.2N/mm² minimum
Insulation Elongation:
150% minimum
Thermal Stability:
Temperature - 158°C; 70% tensile strength & elongation retention
Shrinkage:
3 mm maximum at each end at 125°C/1 hour
Insulation Resistance:
1524 Mohm.km minimum
Spark Test:
8.0 kV
APPROVAL:
Electronic sign off - no signatures will appear.
©2012 Tyco Electronics Corporation, A TE Connectivity Ltd. Company. All Rights Reserved.
Specification Control Drawing
Primary Insulation
Radiation Crosslinked Modified Polyalkene
FlexLite™
FINISHED WIRE Crosslink
Verification Test
FLDWC0311-2.50-*
Conductor
Description
MODIFIED POLYALKENE/PVDF INSULATED, 125°C, 600 VOLT
and the requirements of the issue is effect of WCD3106, UL style 3584 and shall carry UL labels to that effect.
DUAL WALL HOOKUP WIRE, TIN PLATED COPPER, RADIATION-CROSSLINKED,
The complete requirements for procuring the wire described herein shall consist of this document, Test Regime WSD3106(UK)
This specification sheet takes precedenceover documents referenced
herein. As Tyco Electronics UK Ltd. reserve the right to make changes
in construction without notice please contact Tyco Electronics UK Ltd to
ensure that this document is the latest issue.
Tyco Electronics UK Ltd
Faraday Road
Dorcan
SWINDON
SN3 5HH
Tel: +44 (0)1793 528171
Fax: +44 (0)1793 572516
TE Connectivity is a trading name of Tyco
Electronics UK Ltd, which is registered in
England and Wales, number 550926.
Registered office: Faraday Road, Dorcan,
Swindon, SN3 5HH
Website: www.te.com
This drawing and the information set forth hereon are the property of Tyco
Electronics UK Ltd, and are to be held in trust and confidence. Publication,
duplication, disclosure or usefor any purpose not expressly authorised in
writing by Tyco Electronics UK Ltd is prohibited.
This specification sheet takes precedence over documents referenced
herein. As Tyco Electronics UK Ltd. reserve the right to make changes
in construction without notice please contact Tyco Electronics UK Ltd to
ensure that this document is the latest issue.
Tyco Electronics UK Ltd
Faraday Road
Dorcan
SWINDON
SN3 5HH
Tel: +44 (0)1793 528171
Fax: +44 (0)1793 572516
TE Connectivity is a trading name of Tyco
Electronics UK Ltd, which is registered in
England and Wales, number 550926.
Registered office: Faraday Road, Dorcan,
Swindon, SN3 5HH
Website: www.te.com
This drawing and the information set forth hereon are the property of Tyco
Electronics UK Ltd, and are to be held in trust and confidence. Publication,
duplication, disclosure or usefor any purpose not expressly authorised in
writing by Tyco Electronics UK Ltd is prohibited.
This specification sheet takes precedence over documents referenced
herein. As Tyco Electronics UK Ltd. reserve the right to make changes
in construction without notice please contact Tyco Electronics UK Ltd to
ensure that this document is the latest issue.
Tyco Electronics UK Ltd
Faraday Road
Dorcan
SWINDON
SN3 5HH
Tel: +44 (0)1793 528171
Fax: +44 (0)1793 572516
TE Connectivity is a trading name of Tyco
Electronics UK Ltd, which is registered in
England and Wales, number 550926.
Registered office: Faraday Road, Dorcan,
Swindon, SN3 5HH
Website: www.te.com
This drawing and the information set forth hereon are the property of Tyco
Electronics UK Ltd, and are to be held in trust and confidence. Publication,
duplication, disclosure or usefor any purpose not expressly authorised in
writing by Tyco Electronics UK Ltd is prohibited.
This specification sheet takes precedence over documents referenced
herein. As Tyco Electronics UK Ltd. reserve the right to make changes
in construction without notice please contact Tyco Electronics UK Ltd to
ensure that this document is the latest issue.
Tyco Electronics UK Ltd
Faraday Road
Dorcan
SWINDON
SN3 5HH
Tel: +44 (0)1793 528171
Fax: +44 (0)1793 572516
TE Connectivity is a trading name of Tyco
Electronics UK Ltd, which is registered in
England and Wales, number 550926.
Registered office: Faraday Road, Dorcan,
Swindon, SN3 5HH
Website: www.te.com
This drawing and the information set forth hereon are the property of Tyco
Electronics UK Ltd, and are to be held in trust and confidence. Publication,
duplication, disclosure or usefor any purpose not expressly authorised in
writing by Tyco Electronics UK Ltd is prohibited.