a~í~=pÜÉÉía~í~=pÜÉÉí
SMT inductors
SIMID series, SIMID 1210-T
Series/Type: B82422T
Date: October 2012
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
210/12
Please read Cautions and warnings and
Important notes at the end of this document.
Size 1210 (EIA) or 3225 (IEC)
Rated inductance 0.010 ... 100 μH
Rated current 60 ... 450 mA
Construction
■Ceramic or ferrite core
■Laser-welded winding
■Flame-retardant molding
Features
■High Q factor
■High resonance frequency
■High L value
■Qualified to AEC-Q200
■Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020D
■RoHS-compatible
Applications
■Filtering of supply voltages, coupling, decoupling
■Antenna systems
■Automotive electronics
■Telecommunications
■Consumer and data processing equipment
■Industrial electronics
Terminals
■Base material CuSn6
■Layer composition Cu, Ag, Sn (lead-free)1)
■Electro-plated
Marking
■Marking on component:
Manufacturer and letter “T”, L value (in PH),
tolerance of L value (coded), date of manufacture (YWWD)
■Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing units
■8-mm blister tape, wound on 180-mm or 330-mm reel
■Packing units:
180-mm reel: 2000 pcs./reel
330-mm reel: 8000 pcs./reel
1) Ni-barrier-plated terminals (NiSn) on request (B82422T*50).
B82422TSMT inductors, SIMID series
SIMID 1210-T
310/12
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawing and layout recommendation
Taping and packing
Blister tape Reel
Dimensions in mm
IND0073-6-E
2±0.1
1)
0.5±0.2
1)
3.2+0.3
2±0.1
0.15 max.
0.4 min.
1)
2.5+0.3
Marking
1) Soldering area
IND0053-6
C
D
B
A
B
ABCD
2.7 1.15 2.1 4.4
Dimensions in mm
2.6
<
_
_
<
4.2
Component 1.5+0.1 2±0.05
4±0.1
3.5±0.05
1.75±0.1
8±0.3
4±0.1
Direction of unreeling
IND0559-Z-E
1.0+0.2
IND0592-V
62±1.5
14.4 max.
+1.5
8.4
0
_
180
+0
_
2
330
2
+0
_
12.75
+0.15
0
_
B82422TSMT inductors, SIMID series
SIMID 1210-T
410/12
Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and measuring conditions
Rated inductance LRMeasured with impedance analyzer Agilent 4294A
at frequency fL, 0.1 V, +20 °C
Q factor Qmin Measured with impedance analyzer Agilent 4294A
at frequency fQ, +20 °C
Rated temperature TR+85 qC
Rated current IRMaximum permissible DC with inductance decrease
'L/L0 d10% and temperature increase
of d 30 K at rated temperature
Self-resonance frequency fres,min Measured with impedance analyzer Agilent E4991A /
network analyzer Agilent E8362B, +20 °C
DC resistance Rmax Measured at +20 qC
Solderability (lead-free) Sn95.5Ag3.8Cu0.7: +(245 r5) °C, (5 r0.3) s
Wetting of soldering area t 90%
(based on IEC 60068-2-58)
Resistance to soldering heat +260 qC, 40 s (as referenced in JEDEC J-STD 020D)
Climatic category 55/125/56 (to IEC 60068-1)
Storage conditions Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, d 75% RH
Weight Approx. 50 mg
B82422TSMT inductors, SIMID series
SIMID 1210-T
510/12
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size 330 mm the last digit has to be an »8«. Example: B82422T3100K008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
LR
PH
Tolerance Qmin fL; fQ
MHz
IR
mA
Rmax
:
fres,min
MHz
Ordering code1)2)
( 180-mm reel)
Core material: ceramic
0.010 r5% J
r10% K
15 100 450 0.10 4000 B82422T3100+000
0.012 17 100 450 0.11 3500 B82422T3120+000
0.015 19 100 450 0.13 3000 B82422T3150+000
0.018 21 100 450 0.14 2000 B82422T3180+000
0.022 23 100 450 0.16 2000 B82422T3220+000
0.027 23 100 450 0.17 1700 B82422T3270+000
0.033 25 100 450 0.18 1700 B82422T3330+000
0.039 25 100 450 0.19 1300 B82422T3390+000
0.047 26 100 450 0.20 1300 B82422T3470+000
0.056 26 100 450 0.21 1100 B82422T3560+000
0.068 27 100 450 0.23 1000 B82422T3680+000
0.082 27 100 450 0.26 1000 B82422T3820+000
0.10 28 100 450 0.31 900 B82422T3101+000
Core material: ferrite
0.12 r5% J
r10% K
30 25.2 450 0.15 900 B82422T1121+000
0.15 30 25.2 450 0.18 700 B82422T1151+000
0.18 30 25.2 450 0.19 500 B82422T1181+000
0.22 30 25.2 450 0.20 500 B82422T1221+000
0.27 30 25.2 450 0.21 500 B82422T1271+000
0.33 30 25.2 450 0.23 500 B82422T1331+000
0.39 30 25.2 450 0.25 400 B82422T1391+000
0.47 30 25.2 450 0.30 400 B82422T1471+000
0.56 30 25.2 450 0.31 300 B82422T1561+000
0.68 30 25.2 450 0.34 300 B82422T1681+000
0.82 30 25.2 450 0.38 300 B82422T1821+000
1.0 30 7.96 400 0.6 300 B82422T1102+000
1.2 30 7.96 390 0.7 250 B82422T1122+000
^
^
^
^
B82422TSMT inductors, SIMID series
SIMID 1210-T
610/12
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size 330 mm the last digit has to be an »8«. Example: B82422T1104K008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
LR
PH
Tolerance Qmin fL; fQ
MHz
IR
mA
Rmax
:
fres,min
MHz
Ordering code1)2)
( 180-mm reel)
1.5 r5% J
r10% K
30 7.96 370 0.7 200 B82422T1152+000
1.8 30 7.96 350 0.8 140 B82422T1182+000
2.2 30 7.96 320 0.8 100 B82422T1222+000
2.7 30 7.96 290 0.9 70 B82422T1272+000
3.3 30 7.96 260 1.2 60 B82422T1332+000
3.9 30 7.96 250 1.3 60 B82422T1392+000
4.7 30 7.96 220 1.5 50 B82422T1472+000
5.6 27 7.96 200 1.6 45 B82422T1562+000
6.8 27 7.96 180 1.8 40 B82422T1682+000
8.2 27 7.96 170 2.0 35 B82422T1822+000
10 27 2.52 150 2.1 30 B82422T1103+000
12 27 2.52 140 2.5 25 B82422T1123+000
15 27 2.52 130 2.8 20 B82422T1153+000
18 27 2.52 120 3.0 20 B82422T1183+000
22 27 2.52 110 3.5 20 B82422T1223+000
27 27 2.52 80 4.5 20 B82422T1273+000
33 27 2.52 70 5.6 17 B82422T1333+000
39 27 2.52 65 6.4 16 B82422T1393+000
47 27 2.52 60 7.0 15 B82422T1473+000
56 27 2.52 60 8.0 12 B82422T1563+000
68 27 2.52 60 9.0 9 B82422T1683+000
82 25 2.52 60 10 9 B82422T1823+000
100 20 0.796 60 11 8 B82422T1104+000
^
^
B82422TSMT inductors, SIMID series
SIMID 1210-T
710/12
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent E4991A, typical values at +20 °C
Q factor versus frequency f
measured with impedance analyzer Agilent
E4991A, typical values at +20 °C
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4285A,
typical values at +20 °C
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = +85 °C)
IND0074-8
10
6
10
7
Hz10
8
f
10
9
100 μH
100 nH
10 nH
10 μH
1 μH
10
10
10
0
1
10
10
10
2
3
Ω
5
_
1
B82422T
Z||
10
4
IND0075-W
I
10
L
10
10 10
0
10
1
A
DC
10
10
0
10
1
10
μH
2
10
10
3
100 μH
10 μH
1 μH
0.1 μH
0.01 μH
B82422T
_
2
_
3
_
2
1
_
1
_
IND0077-H-E
00
T
A
0.2
0.4
0.6
0.8
1.0
1.2
20 40 60 80 100 140
I
R
op
IB82422T
˚
C
B82422TSMT inductors, SIMID series
SIMID 1210-T
810/12
Cautions and warnings
■Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
910/12
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS / TDK:
B82422T1273J000 B82422T1102K B82422T1103K B82422T1104K B82422T1124K B82422T1153K
B82422T1221K B82422T1222K B82422T1223K B82422T1224K B82422T1274K B82422T1331K B82422T1332K
B82422T1333K B82422T1334K B82422T1471K B82422T1472K B82422T1473K B82422T1683K B82422T1821K
B82422T3100K B82422T3101K B82422T3220K B82422T3470K B82422X100 B82422X1 B82422T1102J000
B82422T1103J000 B82422T1104J000 B82422T1121J000 B82422T1121K000 B82422T1122J000
B82422T1122K000 B82422T1123J000 B82422T1123K000 B82422T1151J000 B82422T1151K000
B82422T1152J000 B82422T1152K000 B82422T1153J000 B82422T1181J000 B82422T1181K000
B82422T1182J000 B82422T1182K000 B82422T1183J000 B82422T1183K000 B82422T1221J000
B82422T1222J000 B82422T1223J000 B82422T1271J000 B82422T1271K000 B82422T1272J000
B82422T1272K000 B82422T1273K000 B82422T1331J000 B82422T1332J000 B82422T1333J000
B82422T1391J000 B82422T1391K000 B82422T1392J000 B82422T1392K000 B82422T1393J000
B82422T1393K000 B82422T1471J000 B82422T1472J000 B82422T1473J000 B82422T1561J000
B82422T1561K000 B82422T1562J000 B82422T1562K000 B82422T1563J000 B82422T1563K000
B82422T1681J000 B82422T1681K000 B82422T1682J000 B82422T1682K000 B82422T1683J000
B82422T1821J000 B82422T1822J000 B82422T1822K000 B82422T1823J000 B82422T1823K000
B82422T3100J000 B82422T3101J000 B82422T3120J000 B82422T3120K000 B82422T3150J000
B82422T3150K000 B82422T3180J000 B82422T3180K000 B82422T3220J000 B82422T3270J000
B82422T3270K000 B82422T3330J000 B82422T3330K000 B82422T3390J000 B82422T3390K000
B82422T3470J000 B82422T3560J000 B82422T3560K000