.100" ELH High Density Highest Contact Density The ELH .100" spacing, high-density screwterminal/edgecard connector features the highest contact density of any screw termination connector system available. Connectors are available in singleand double-density versions and range in size from 10--40 and 20--80 contacts, respectively. The ELH is designed for use with double-sided boards. Single-density connectors provide opposing board contacts on staggered .200" centers. The double-density design features opposing board contacts on .100" centers. (See drawings.) Bifurcated, selectively-plated contacts are pre-loaded to guarantee high normal force and good electrical and mechanical contact with a minimum of contact deflection. This assures reliable performance under extreme conditions of board warping, thickness and movement. Connectors are designed for side wire entry. Screw terminations are actuated from the rear of the connector. Single-density wire bundles train to one side (left or right) of the connector. Double-density bundles train to both sides. View part PDF File View part PDF File Download part DXF File Download part DXF File Sizes and Special Configurations Connector sizes listed are standard configurations. Contact Amphenol Pcd for minimum order quantity requirements for special sizes and configurations. SPECIFICATIONS: Current Rating: 5A Insulation Resistance: >105 Megohms Durability: 500 cycles per MIL-C-21097 Wire Range: 14-26 AWG Wire Pullout Force: 35 lbs minimum Board Thickness Range: .054-.070" MATERIALS: Housing: Glass-filled polyester, UL 94-V0, Black Contact: Phosphor bronze, .000030" selective gold finish Wire Clamp: Brass, nickel finish Terminal Screw: Steel, nickel finish