.100" ELH High Density
View part PDF File
Download part DXF File
View part PDF File
Download part DXF File
Highest Contact Density
The ELH .100" spacing, high-density screw-
terminal/edgecard connector features the highest
contact density of any screw termination connector
system available. Connectors are available in single-
and double-density versions and range in size from
10--40 and 20--80 contacts, respectively.
The ELH is designed for use with double-sided
boards. Single-density connectors provide opposing
board contacts on staggered .200" centers. The
double-density design features opposing board
contacts on .100" centers. (See drawings.)
Bifurcated, selectively-plated contacts are pre-loaded
to guarantee high normal force and good electrical
and mechanical contact with a minimum of contact
deflection. This assures reliable performance under
extreme conditions of board warping, thickness and
movement.
Connectors are designed for side wire entry. Screw
terminations are actuated from the rear of the
connector. Single-density wire bundles train to one
side (left or right) of the connector. Double-density
bundles train to both sides.
Sizes and Special Configurations
Connector sizes listed are standard configurations.
Contact Amphenol Pcd for minimum order quantity
requirements for special sizes and configurations.
SPECIFICATIONS:
Current Rating: 5A
Insulation Resistance: >105 Megohms
Durability: 500 cycles per MIL-C-21097
Wire Range: 14-26 AWG
Wire Pullout Force: 35 lbs minimum
Board Thickness Range: .054-.070"
MATERIALS:
Housing: Glass-filled polyester, UL 94-V0, Black
Contact: Phosphor bronze, .000030" selective gold
finish
Wire Clamp: Brass, nickel finish
Terminal Screw: Steel, nickel finish
