APT2X100D100J - Advanced Power Technology

Anti-Parallel Parallel

323

414

SOT-227

APT2X100D100J APT2X101D100J

Characteristic / Test Conditions

Maximum D.C. Reverse Voltage

Maximum Peak Repetitive Reverse Voltage

Maximum Working Peak Reverse Voltage

Maximum Average Forward Current (TC = 40°C, Duty Cycle = 0.5)

RMS Forward Current

Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)

Operating and StorageTemperature Range

Lead Temperature: 0.063" from Case for 10 Sec.

Symbol

VRRM

VRWM

IF(AV)

IF(RMS)

IFSM

TJ,TSTG

Symbol

IRM

Characteristic / Test Conditions

IF = 100A

Maximum Forward Voltage IF = 200A

IF = 100A, TJ = 150°C

Maximum Reverse Leakage Current VR = VR Rated

VR = VR Rated, TJ = 125°C

Junction Capacitance, VR = 200V

Series Inductance (Lead to Lead 5mm from Base)

STATIC ELECTRICAL CHARACTERISTICS

UNIT

Volts

Amps

°C

UNIT

Volts

µA

MIN TYP MAX

2.5

2.0

250

500

116

APT2X100/2X101D100J

1000

100

170

1000

-55 to 150

300

MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified.

PRODUCT BENEFITS

•Low Losses

•Low Noise Switching

•Cooler Operation

•Higher Reliability Systems

•Increased System Power

Density

PRODUCT FEATURES

•Ultrafast Recovery Times

•Soft Recovery Characteristics

•Popular SOT-227 Package

•Low Forward Voltage

•High Blocking Voltage

•Low Leakage Current

PRODUCT APPLICATIONS

•Anti-Parallel Diode

-Switchmode Power Supply

-Inverters

•Free Wheeling Diode

-Motor Controllers

-Converters

•Snubber Diode

•Uninterruptible Power Supply (UPS)

•Induction Heating

•High Speed Rectifiers

DUAL DIE ISOTOP® PACKAGE

ULTRAFAST SOFT RECOVERY DUAL RECTIFIER DIODES

053-0007 Rev D

APT2X100D100J 1000V 100A

APT2X101D100J 1000V 100A

USA

405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364

EUROPE

Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord F-33700 Merignac - France Phone: (33) 5 5792 1515 FAX: (33) 5 56 47 97 61

APT Website - http://www.advancedpower.com

MIN TYP MAX

80 95

160

220

28 38

52 65

1120

4160

800

400

UNIT

Amps

Volts

A/µs

APT2X100/2X101D100J

Characteristic

Reverse Recovery Time, IF = 1.0A, diF/dt = -15A/µs, VR = 30V, TJ = 25°C

Reverse Recovery Time TJ = 25°C

IF = 100A, diF/dt = -800A/µs, VR = 540V TJ = 100°C

Forward Recovery Time TJ = 25°C

IF = 100A, diF/dt = 800A/µs, VR = 540V TJ = 100°C

Reverse Recovery Current TJ = 25°C

IF = 100A, diF/dt = -800A/µs, VR = 540V TJ = 100°C

Recovery Charge TJ = 25°C

IF = 100A, diF/dt = -800A/µs, VR = 540V TJ = 100°C

Forward Recovery Voltage TJ = 25°C

IF = 100A, diF/dt = 800A/µs, VR = 540V TJ = 100°C

Rate of Fall of Recovery Current TJ = 25°C

IF = 100A, diF/dt = -800A/µs, VR = 540V (See Figure 10) TJ = 100°C

DYNAMIC CHARACTERISTICS

Symbol

trr1

trr2

trr3

tfr1

tfr2

IRRM1

IRRM2

Qrr1

Qrr2

Vfr1

Vfr2

diM/dt

THERMAL AND MECHANICAL CHARACTERISTICS

Characteristic / Test Conditions

Junction-to-Case Thermal Resistance

Junction-to-Ambient Thermal Resistance

RMS Voltage (50-60 Hz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.)

Package Weight

Maximum Torque (Mounting = 8-32 or 4mm Machine and Terminals = 4mm Machine)

Symbol

RθJC

RθJA

VIsolation

Torque

MIN TYP MAX

0.42

2500

1.03

29.2

13.6

1.5

UNIT

°C/W

Volts

lb•in

N•m

10-5 10-4 10-3 10-2 10-1 1.0 10

RECTANGULAR PULSE DURATION (SECONDS)

FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION

0.5

0.1

0.05

0.01

0.005

0.001

D=0.5

ZθJC, THERMAL IMPEDANCE (°C/W)

Note:

Duty Factor D = t1/t2

Peak TJ = PDM x ZθJC + TC

PDM

SINGLE PULSE

0.02

0.05

0.1

0.2

0.01

053-0007 Rev D

VF, ANODE-TO-CATHODE VOLTAGE (VOLTS) diF/dt, CURRENT SLEW RATE (AMPERES/µSEC)

Figure 2, Forward Voltage Drop vs Forward Current Figure 3, Reverse Recovery Charge vs Current Slew Rate

diF/dt, CURRENT SLEW RATE (AMPERES/µSEC) TJ, JUNCTION TEMPERATURE (°C)

Figure 4, Reverse Recovery Current vs Current Slew Rate Figure 5, Dynamic Parameters vs Junction Temperature

diF/dt, CURRENT SLEW RATE (AMPERES/µSEC) diF/dt, CURRENT SLEW RATE (AMPERES/µSEC)

Figure 6, Reverse Recovery Time vs Current Slew Rate Figure 7, Forward Recovery Voltage/Time vs Current Slew Rate

VR, REVERSE VOLTAGE (VOLTS)

Figure 8, Junction Capacitance vs Reverse Voltage

CJ, JUNCTION CAPACITANCE trr, REVERSE RECOVERY TIME IRRM, REVERSE RECOVERY CURRENT IF, FORWARD CURRENT

(pico-FARADS) (nano-SECONDS) (AMPERES) (AMPERES)

tfr, FORWARD RECOVERY TIME Kf, DYNAMIC PARAMETERS Qrr, REVERSE RECOVERY CHARGE

(nano-SECONDS) (NORMALIZED) (nano-COULOMBS)

Vfr, FORWARD RECOVERY VOLTAGE

(VOLTS)

0 0.5 1.0 1.5 2.0 2.5 3.0 10 50 100 500 1000

0 200 400 600 800 1000 -50 -25 0 25 50 75 100 125 150

0 200 400 600 800 1000 0 200 400 600 800 1000

0.01 0.05 0.1 0.5 1 5 10 50 100 200

APT2X100/2X101D100J

300

240

180

120

400

300

200

100

2000

1000

500

100

TJ=100°C

VR=540V

TJ=100°C

VR=540V

TJ=100°C

VR=540V

IF=100A

Qrr

100A

200A

50A

trr

IRRM

trr

Qrr

TJ = 25°C

TJ = -55°C

TJ = 100°C

TJ = 150°C

053-0007 Rev D

50A

100A

200A

TJ=100°C

VR=540V

50A

100A

8000

6000

4000

2000

2.0

1.6

1.2

0.8

0.4

0.0

2500

2000

1500

1000

500

tfr

Vfr

Anode 1

31.5 (1.240)

31.7 (1.248)

Dimensions in Millimeters and (Inches)

7.8 (.307)

8.2 (.322)

30.1 (1.185)

30.3 (1.193)

38.0 (1.496)

38.2 (1.504)

14.9 (.587)

15.1 (.594)

11.8 (.463)

12.2 (.480)

8.9 (.350)

9.6 (.378)

Hex Nut M4 H100

(4 places)

0.75 (.030)

0.85 (.033) 12.6 (.496)

12.8 (.504)

25.2 (0.992)

25.4 (1.000)

1.95 (.077)

2.14 (.084)

Anode 2

Anti-parallel Parallel

Cathode 1

r = 4.0 (.157)

(2 places) 4.0 (.157)

4.2 (.165)

(2 places)

W=4.1 (.161)

W=4.3 (.169)

H=4.8 (.187)

H=4.9 (.193)

(4 places)

3.3 (.129)

3.6 (.143)

Cathode 2 Anode 1

Cathode 2 Anode 2

Cathode 1

APT2X100D100J APT2X101D100J

APT2X100/2X101D100J

053-0007 Rev D

PEARSON 411

CURRENT

TRANSFORMER

0.5 IRRM

/dt Adjust

30µH

D.U.T.

+15v

-15v

0.75 IRRM

trr/Qrr

Waveform

Zero

/dt - Current Slew Rate, Rate of Forward

Current Change Through Zero Crossing.

- Forward Conduction Current

RRM

- Peak Reverse Recovery Current.

trr - Reverse Recovery Time Measured from Point of I

Qrr - Area Under the Curve Defined by I

RRM

and trr.

diM/dt - Maximum Rate of Current Change During the Trailing Portion of trr.

Current Falling Through Zero to a Tangent Line

{

diM/dt

}

Extrapolated Through Zero Defined by 0.75 and 0.50 I

RRM

Figure 9, Diode Reverse Recovery Test Circuit and Waveforms

Figure 10, Diode Reverse Recovery Waveform and Definitions

Qrr = 1/2

(

trr . I

RRM

)

APT Reserves the right to change, without notice, the specifications and information contained herein.

ISOTOP® is a Registered Trademark of SGS Thomson.

SOT-227 Package Outline