ALUMINUM ELECTROLYTIC CAPACITORS AS Wide Temperature Range, Miniature Type Permissible Abnormal Voltage series AQ Improved safety feature for abnormally excessive voltage. High ripple current product. Compliant to the RoHS directive (2011/65/EU). Smaller AS Specifications Performance Characteristics -40 to +105C 200V, 400V 4.7 to 330F 20% at 120Hz, 20C After 1 minute's application of rated voltage at 20C, leakage current is 0.04CV+100 (A) or less. Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current 200 0.15 Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 400 0.15 Measurement frequency:120Hz at 20C 200 3 6 Rated voltage (V) Stability at Low Temperature Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C 400 8 10 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 2000 hours at 105C, the peak voltage shall not exceed the rated voltage. Shelf Life After leaving capacitors under no load at 105C for 1000 hours they shall meet the specified values for the endurance characteristics listed above. Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Test conditions voltage (V) Safety Performance Test Voltage 300VDC and 375VDC 500VDC and 600VDC Limited DC current 4A (5A : 330F) 200 400 2A (4A : 100F or more) Printed with white color letter on dark brown sleeve. Marking Radial Lead Type Type numbering system (Example : 200V 220F) 1 d Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U AS 2 D 2 2 1 MHD P 0.5 D+0.5 MAX. Size code Configuration Capacitance tolerance (20%) Rated capacitance (220F) L+ 2.0MAX. 15MIN 4MIN Rated voltage (200V) (mm) Pressure relief vent D 10 12.5 16 18 P 5.0 5.0 5.0 5.0 d 0.6 0.6 0.8 0.8 Series name Type Configuration In case L>25 for 12.5 (D) case sizes, lead diameter 0.8 (d) will be applied. Pb-free leadwire Pb-free PET sleeve D * Please refer to page 20 about the end seal configuration. 10 PD 12.5 to 18 HD Dimensions 200 (2D) V Cap.(F) 4.7 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 Code D 4R7 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 10 12.5 10 x 20 160 10 x 25 195 12.5 x 20 12.5 x 20 12.5 x 25 12.5 x 25 12.5 x 31.5 400 (2G) 16 195 210 320 360 430 16 x 20 Coefficient 50, 60Hz 0.80 120Hz 1.00 300Hz 1.25 1kHz 1.40 10kHz or more 1.60 10 10 x 9 60 430 16 x 25 460 16 x 31.5 600 Frequency coefficient of rated ripple current Frequency 18 18 x 20 18 x 25 18 x 31.5 18 x 35.5 18 x 40 460 600 710 890 910 12.5 12.5 x 20 12.5 x 25 16 18 165 200 16 x 20 16 x 25 16 x 25 16 x 31.5 16 x 35.5 16 x 40 225 255 290 340 385 435 18 x 20 18 x 20 18 x 25 18 x 25 18 x 31.5 18 x 35.5 18 x 40 255 280 320 360 430 490 540 Case size Rated DxL (mm) ripple Rated ripple current (mArms) at 105C 120Hz : In case of low profile type, 6 will be put at 12th digit of type numbering system. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D