ALUMINUM  ELECTROLYTIC  CAPACITORS
CAT.8100D
200
400
Improved safety feature for abnormally excessive voltage.
High ripple current product.
Compliant to the RoHS directive (2011/65/EU).
AS series
Wide Temperature Range, Miniature Type Permissible
Abnormal Voltage
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Frequency coefficient of rated ripple current
Frequency
Coefficient
50, 60Hz 120Hz 300Hz 1kHz 10kHz or more
0.80 1.00 1.25 1.40 1.60
Category
Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Safety Performance
Marking Printed with white color letter on dark brown sleeve.
Performance Characteristics
Item
40 to +105°C
200V, 400V
4.7 to 330µF
± 20% at 120Hz, 20°C
Measurement frequency:120Hz at 20
°C
Measurement frequency : 120Hz
After leaving capacitors under no load at 105°C for 1000 hours they shall meet the specified values for the endurance characteristics listed above.
The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case.
After 1 minute's application of rated voltage at 20°C, leakage current is 0.04CV+100 (µA) or less.
The specifications listed at right shall be met when the
capacitors are restored to 20
°C
after D.C. bias plus rated
ripple current is applied for 2000 hours at 105
°C
, the peak
voltage shall not exceed the rated voltage.
Specifications
Type numbering system (Example : 200V 220
µ
F)
φD
P
10
5.0
φd 0.6
12.5
5.0
0.6
16
5.0
0.8
18
5.0
0.8
U
1
A
2
S
3
2
4
D
5
2
6
2
7
1
8
M
9
H
10
D
11 12
Configuration
Capacitance tolerance (±20%)
Rated capacitance (220µF)
Rated voltage (200V)
Series name
Type
Size code
In case L>25 for φ12.5 (D) case sizes,
lead diameter φ0.8 (d) will be applied. φ D
10
Pb-free leadwire
Pb-free PET sleeve
PD
12.5 to 18 HD
Configuration
(mm)
L+2.0MAX. 15MIN 4MIN
φD+0.5 MAX.
Sleeve (P.E.T.) φd
Pressure
relief vent
P±0.5
Radial Lead Type
Rated voltage (V)
tan δ (MAX.)
200
0.15
400
0.15
Z–25°C / Z+20°C
Z–40°C / Z+20°C
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
200
3
6
400
8
10
Capacitance change
Leakage current
tan δ
Within ±20% of the initial capacitance value
Less than or equal to the initial specified value
200% or less than the initial specified value
voltage (V) Test conditions
Limited DC current
4A (5A : 330
µF)
2A (4A : 100µF or more)
Test Voltage
300VDC and 375VDC
500VDC and 600VDC
Rated ripple current (mArms) at 105°C 120Hz
: In case of low profile type, 6 will be put at 12th digit of type numbering system.
Dimensions
V
Cap.(µF)
                 4.7
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
200 (2D) 400 (2G)
φ10
10 × 20
10 × 25
160
195
φ12.5
12.5 × 20
12.5 × 20
12.5 × 25
12.5 × 25
12.5 × 31.5
195
210
320
360
430
φ16
16 × 20
16 × 25
16 × 31.5
430
460
600
φ18
18 × 20
18 × 25
18 × 31.5
18 × 35.5
18 × 40
460
600
710
890
910
φ10
10 × 9
60
φ12.5
12.5 × 20
12.5 × 25
165
200
φ16
16 × 20
16 × 25
16 × 25
16 × 31.5
16 × 35.5
16 × 40
225
255
290
340
385
435
φ18
18 × 20
18 × 20
18 × 25
18 × 25
18 × 31.5
18 × 35.5
18 × 40
255
280
320
360
430
490
540
4R7
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
Code
φD
AS
AQ
Smaller
Please refer to page 20 about the end
seal configuration.
Case size
φD×L (mm)
Rated
ripple