STM32479I-EVAL - STMICROELECTRONICS

For further information contact your local STMicroelectronics sales office.

September 2015 DocID028151 Rev 1 1/4

STM32479I-EVAL

Evaluation board with STM32F479NI MCU

Data brief

Features

STM32F479NIH6 microcontroller with

2 Mbytes of Flash memory and 324 Kbytes of

RAM in TFBGA package

six 5 V power supply options:

– power jack

– ST-LINK/V2-1 USB connector

– user USB HS connector

– user USB FS1 connector

– user USB FS2 connector

– daughterboard

SAI Audio DAC

stereo audio jack which supports headset with

microphone

stereo digital microphone

audio jack connector used to connect external

speakers

2-Gbyte (or more) SDMMC interface microSD

card

RF-EEPROM on I2C compatible serial

interface

RS232 communication

IrDA transceiver

JTAG/SWD and ETM trace debug support

embedded ST-LINK/V2-1

IEEE-802.3-2002 compliant Ethernet

connector

camera module

8Mx32 bit SDRAM, 1Mx16 bit SRAM and

8Mx16 bit NOR Flash

512-Mbit Quad-SPI NOR Flash

4-inch 800x480 pixel TFT color LCD with MIPI

DSI interface and capacitive touch panel

joystick with 4-direction control and selector

reset, WakeUp/Tamper or key button

4 color user LEDs

extension connectors and memory connectors

for daughterboard or wrapping board

USB OTG HS and FS with Micro-AB

connectors

1. Picture not contractual

RTC with backup battery

CAN2.0A/B compliant connection

potentiometer

motor control connector

www.st.com

Description DB2644

2/4 DocID028151 Rev 1

1 Description

The STM32479I-EVAL evaluation board is a complete demonstration and development

platform for STMicroelectronics ARM® Cortex® -M4 core-based STM32F479NIH6

microcontroller. It features three I2C interfaces, six SPIs with two multiplexed full-duplex I2S

interfaces, SDMMC, four USARTs, two CANs, three 12-bit ADCs, two 12-bit DACs, one SAI,

8 to 14-bit digital camera module interface, internal 320+4 Kbytes of SRAM and 2 Mbytes of

Flash memory, USB HS OTG and USB FS OTG, Ethernet MAC, FMC interface, MIPI DSI

interface, Quad-SPI interface, Cryptographic acceleration, JTAG and ETM debugging

support. This evaluation board can be used as a reference design for user application

development but it is not considered as a final application.

The full range of hardware features on the board helps the user to evaluate all peripherals

(USB OTG HS, USB OTG FS, Ethernet, motor control, CAN, microSD Card, USART, Audio

DAC and ADC, digital microphone, IrDA, RF-EEPROM, SRAM, NOR Flash, SDRAM, Quad-

SPI Flash, 4" TFT LCD with MIPI DSI interface and capacitive touch panel and others) and

to develop his own applications. Extension headers make it possible to easily connect a

daughterboard for specific application.

The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer

for the STM32 MCU.

2 Ordering information

To order the evaluation boards based on the STM32F479NI MCU, use the order code:

STM32479I-EVAL.

DocID028151 Rev 1 3/4

DB2644 Revision history

3 Revision history

Table 1. Document revision history

Date Revision Changes

07-Sep-2015 1 Initial release.

DB2644

4/4 DocID028151 Rev 1

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and

improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on

ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order

acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or

the design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.