Environmental Connectors Crimp Tools and Accessories #8 Quadrax Contacts for Glenair Series 257-455 and 257-459 Connectors #8 Quadrax Contact Type Size Glenair Part Number Tool Code Military Part Number 854-001 N/A 854-002 Cable Type Dash No. Wire Size 01 - Tensolite NF26Q100 26AWG C, J (Inner) 02 - Tensolite NF24Q100 24AWG K, M (Outer) 03 - Draka Fileca F 4704-6 26AWG 04 - Draka Fileca F 4704-4 24AWG Sample Contact Consult factory for PC tail/other cable options Crimp Tool And Positioner For #12 and #16 Power Contacts 1 Crimp tool for use with size #16 and #12 power pins. 9.75 inches OAL, 1.25 pounds. Use with M39029/57 and /58 contacts and 809-093 adapters. 2 Positioner for use with size #12 and #16 Power contacts. 1 Figure 2 D Military Part Number M22520/1-01 M22520/1-04 1 2 Daniels Part Number AF8 TH163 Tool Code A B Miniature Adjustable Crimp Tool These crimp tools perform precision eight indent crimps for gas-tight wire terminations and excellent tensile strength. Adjustment wheel has 8 settings. Ratchet mechanism prevents improper crimps. Use with bayonet-type positioners. Check calibration with M22520/3 gages. Length is 6.75 inches, weight is approx. 10 oz. 1 1 Standard M22520/2-01 miniature crimper. Use with standard size #20 and #22D contacts and with M39029/76, /77 and /78 coaxial center contacts. Requires positioner, ordered separately. Glenair Part Number 809-015 2 2 (c) 2010 Glenair, Inc. Daniels Part Military Part Number Number M22520/2-01 AFM8 Tool Code C Positioner for M39029/76, 77 and 78 coaxial inner contact. Use with 809-015 crimp tool. Coax/ Power Power Power Power Power Coax Coax Quadrax Contact Size #20 #22D #22D #22D #16 #12 #24 Military Part Number M22520/2-10 M22520/2-09 M22520/2-07 M22520/2-06 M22520/2-35 M22520/2-34 M22520/2-37 CAGE CODE 06324 Daniels Part Number K43 K42 K40 K41 K532-1 K323 K709 Notes Series I, II, III and IV Series I, II, III and IV Pin Series I, III and IV Socket Series II Socket Series I, II, III and IV Series I, II, III and IV Quadrax Inner Contact Tool Code D E F G H I J Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-6 E-Mail: sales@glenair.com Environmental Connectors Crimp Tools and Accessories Parallel Action Crimp Tool and Hex Die Set 1 Parallel action tool for use with hex crimp dies. 11 inches OAL, 2.0 pounds. Anodized aluminum frame, steel mechanism, plastic handles. Includes tool for die set removal. Accepts all M22520/5 die sets. 1 Figure 2 1 2 3 Glenair Part Number 809-129 809-130 859-007 2 Die set for terminating coaxial shield to outer contact. Use with size #12 matched impedance M39029/102 and 103 type coaxial contacts. Set consists of upper and lower halves. Made of hardened steel with black oxide finish. Approximately 2 inches in length, assembled. Die set has two closures per illustration. Military Part Number M22520/5-01 M22520/5-03 M22520/5-45 Daniels Part Number HX4 Y196 Y143 Tool Code K L M 3 Crimp Tool And Positioner For #12 Coaxial Outer Contact For crimping size #12 shield sleeves. These mil spec approved tools feature a ratchet mechanism to prevent damage from overcrimping. Check calibration with M22520/3 gage. 1 Crimp tool for use with size #12 coaxial contacts. Black handles. 9.75 inches OAL, 1.25 pounds. 1 Figure 2 1 2 Glenair Part Number 809-133 809-134 2 Positioner for use with size #12 coaxial contacts. Use with 809-133 (M22520/31-01) crimp tool. Military Part Number M22520/31-01 M22520/31-02 Daniels Part Number GS200-1 G2P330 Tool Code N P Crimp Tool And Positioner For #16 Coaxial Outer Contact For crimping size #16 shield sleeves. These mil spec approved tools feature a ratchet mechanism to prevent damage from overcrimping. Check calibration with M22520/3 gage. 1 1 Crimp tool for use with size #16 coaxial contacts. Blue handles. 9.75 inches OAL, 1.25 Figure 2 (c) 2010 Glenair, Inc. 1 2 Glenair Part Number 809-127 809-126 CAGE CODE 06324 Military Part Number M22520/4-01 M22520/4-02 2 Positioner for use with size #16 coaxial contacts. Use with 809-127 (M22520/4-01) crimp tool. Daniels Part Number GS100-1 GP295 Tool Code Q R Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com D-7 E-Mail: sales@glenair.com D