Advanced Power N-CHANNEL ENHANCEMENT MODE
Electronics Corp. POWER MOSFET
▼ 100% Avalanche Test BVDSS 500V
▼ Fast Switching Characteristic RDS(ON) 1.4Ω
▼ Simple Drive Requirement ID5.0A
Description
Absolute Maximum Ratings
Symbol Units
VDS Drain-Source Voltage V
VGS Gate-Source Voltage V
ID@TC=25℃Continuous Drain Current, VGS @ 10V A
ID@TC=100℃Continuous Drain Current, VGS @ 10V A
IDM Pulsed Drain Current1A
PD@TC=25℃Total Power Dissipation W
W/℃
EAS Single Pulse Avalanche Energy2mJ
IAR Avalanche Current A
TSTG ℃
TJOperating Junction Temperature Range ℃
Thermal Data
Symbol Value Unit
Rthj-c Maximum Thermal Resistance, Junction-case 1.7 ℃/W
Rthj-a Maximum Thermal Resistance, Junction-ambient 62 ℃/W
Data & specifications subject to change without notice
Parameter
Storage Temperature Range -55 to 150
Parameter
Linear Derating Factor
AP05N50P
±20
Rating
500
RoHS-compliant Product
5.0
18
73.5
3
2.8
45
0.59
-55 to 150
201022072-1/4
GDSTO-220(P)
The TO-220 and package is widely preferred for commercial-industrial
applications. The good thermal performance and low package cost of the
TO-220 Contribute to its wide industry application.
G
D
S
The AP05N50 provide high blocking voltage to overcome voltage surge
and sag in the toughest power system with the best combination of fast
switching,ruggedized design and cost-effectiveness.
Electrical Characteristics@Tj=25oC(unless otherwise specified)
Symbol Parameter Test Conditions Min. Typ. Max. Units
BVDSS Drain-Source Breakdown Voltage VGS=0V, ID=1mA 500 - - V
RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=2.7A - - 1.4 Ω
VGS(th) Gate Threshold Voltage VDS=VGS, ID=250uA 2 - 4 V
gfs Forward Transconductance VDS=10V, ID=2.7A - 2.4 - S
IDSS Drain-Source Leakage Current (Tj=25oC) VDS=500V, VGS=0V - - 25 uA
Drain-Source Leakage Current (Tj=125oC) VDS=400V, VGS=0V - - 250 uA
IGSS Gate-Source Leakage VGS=±20V - - ±100 nA
QgTotal Gate Charge3ID=3.1A - 19 30 nC
Qgs Gate-Source Charge VDS=400V - 4.6 - nC
Qgd Gate-Drain ("Miller") Charge VGS=10V - 6.3 - nC
td(on) Turn-on Delay Time3VDD=250V - 11 - ns
trRise Time ID=3.1A - 8 - ns
td(off) Turn-off Delay Time RG=12Ω,VGS=10V - 32 - ns
tfFall Time RD=80.6Ω-10-ns
Ciss Input Capacitance VGS=0V - 985 1580 pF
Coss Output Capacitance VDS=25V - 85 - pF
Crss Reverse Transfer Capacitance f=1.0MHz - 3.3 - pF
RgGate Resistance f=1.0MHz - 2.5 3.8 Ω
Source-Drain Diode
Symbol Parameter Test Conditions Min. Typ. Max. Units
VSD Forward On Voltage3Tj=25℃, IS=4.5A, VGS=0V - - 1.5 V
trr Reverse Recovery Time3IS=3.1A, VGS=0V, - 300 - ns
Qrr Reverse Recovery Charge dI/dt=100A/µs - 2.6 - uC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Starting Tj=25oC , VDD=50V , L=10mH , RG=25Ω , IAS=3A.
3.Pulse test
THIS PRODUCT HAS BEEN QUALIFIED FOR CONSUMER MARKET. APPLICATIONS OR USES AS CRITERIAL COMPONENT IN LIFE SUPPORT
DEVICE OR SYSTEM ARE NOT AUTHORIZED.
2/4
THIS PRODUCT IS AN ELECTROSTATIC SENSITIVE, PLEASE HANDLE WITH CAUTION.
AP05N50P
Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics
Fig 3. Normalized BVDSS v.s. Junction Fig 4. Normalized On-Resistance
Temperature v.s. Junction Temperature
Fi
g
5. Forward Characteristic o
f
Fig 6. Gate Threshold Voltage v.s.
Reverse Diode Junction Temperature
3/4
AP05N50P
0.8
0.9
1
1.1
1.2
-50 0 50 100 150
Tj , Junction Temperature ( oC)
Normalized BVDSS (V)
0
1
2
3
4
5
02468
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=25oC10V
7.0V
6.0V
5.0V
VG=4.0V
0
1
2
3
-50 0 50 100 150
Tj , Junction Temperature ( oC )
Normalized RDS(ON)
ID=2.7A
VG=10V
0
1
2
3
4
5
0 4 8 12 16 20 24
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=150oC10V
7.0V
6.0V
5.0V
VG=4.0V
0.1
1
10
0 0.2 0.4 0.6 0.8 1 1.2
VSD , Source-to-Drain Voltage (V)
IS (A)
Tj = 150oCT
j = 25oC
0
0.5
1
1.5
-50 0 50 100 150
Tj , Junction Temperature ( oC)
Normalized VGS(th) (V)
Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics
Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance
Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform
4/4
AP05N50P
0.01
0.1
1
0.00001 0.0001 0.001 0.01 0.1 1 10
t , Pulse Width (s)
Normalized Th e rmal Re sponse (Rthjc)
PDM
Duty factor = t/T
Peak Tj = PDM x Rthjc + TC
t
T
0.02
0.01
0.05
0.1
0.2
Duty factor=0.5
Single Pulse
0.1
1
10
100
1 10 100 1000
VDS , Drain-to-Source Voltage (V)
ID (A)
Tc=25oC
Single Pulse
1s
100us
1ms
10ms
100m
0
4
8
12
16
0102030
QG , Total Gate Charge (nC)
VGS , Gate to Sourc e Voltage ( V)
ID=3.1A
VDS =260V
V DS =320V
V DS =400V
1
100
10000
1 5 9 13 17 21 25 29
VDS , Drain-to-Source Voltage (V)
C (pF)
f
=1.0MH
z
Ciss
Coss
Crss
td(on) trtd(off)tf
VDS
VGS
10%
90%
Q
VG
10V
QGS QGD
QG
Charge
DC
Package Outline : TO-220
Millimeters
MIN NOM MAX
A 4.25 4.48 4.70
b0.65 0.80 0.90
b1 1.15 1.38 1.60
c0.40 0.50 0.60
c1 1.00 1.20 1.40
E 9.70 10.00 10.40
E1 --- --- 11.50
e---- 2.54 ----
L 12.70 13.60 14.50
L1 2.60 2.80 3.00
L2 1.00 1.40 1.80
L3 2.6 3.10 3.6
L4 14.70 15.50 16
L5 6.30 6.50 6.70
φ3.50 3.60 3.70
D 8.40 8.90 9.40
1.All Dimensions Are in Millimeters.
2.Dimension Does Not Include Mold Protrusions.
Part Marking Information & Packing : TO-220
SYMBOLS
ADVANCED POWER ELECTRONICS CORP.
E
b
b1
e
D
L3
L4
L1
L2
A
c1
c
L
Package Code
Part Number
Date Code (YWWSSS)
Y：Last Digit Of The Year
WW：Week
SSS：Se
q
uence
05N50P
YWWSSS
LOGO
φ
L5
E1
