EUSA EGERMANY EFRANCE EUK ESWEDEN EBENELUX EPOLAND EITALY ESPAIN ENORWAY
EDENMARK EFINLAND ESWITZERLAND ECZECHIEN EHUNGARY ECIS E CHINA EJAPAN E KOREA
Product Overview
Base module with 4 ModPack interfaces and two 50-pin D-Sub connectors on the front-panel
Base module with 4 ModPack interfaces and one 50-pin D-Sub connectors on the front-panel
14319
14320
Product Description Order No.
PEP Modular Computers GmbH
Apfeltrangerstr. 16
D-87600 KAUFBEUREN
Tel.: ++49 (0) 8341 803 0
Fax: ++49 (0) 8341 803 499
Poland
PEP Modular Computers Sp.zo.o
Al. Jerozolimskie 144
Pok 714 Vp
02-305 WARSZAWA
Tel.: ++48 (0) 2 28 23 55 73
Fax: ++48 (0) 2 28 23 55 73
Sweden
PEP Modular Computers AB
Hornackersvägen 8
Box 1430
S-18314 TÄBY
Tel.: ++46 (0) 8 756 72 60
Fax: ++46 (0) 8 732 63 10
USA
PEP Modular Computers Inc.
750 Holiday Drive, Building 9
Pittsburgh, PA 15220
Tel.: ++1 412 921 3322
Fax: ++1 412 921 3356
Toll free: 800/228-1737
Great Britain
PEP Modular Computers (UK) Ltd.
Riverside Business Centre
SHOREHAM-BY-SEA
BN43 6RE
Tel.: ++44 (0) 1273 44 11 88
Fax: ++44 (0) 1273 44 11 99
Korea
PEP-Dasan Systems
2F Seahun Bldg.
162-1 Samsung-dong
Kangnam-ku
Seoul 135090
SOUTH KOREA
Tel.: ++82 (0) 25 58 08 38
Fax: ++82 (0) 25 55 08 39
Benelux
PEP Modular Computers Benelux
Koning-Albert-Laan 46
B-1780 WEMMEL
Tel.: ++32 (0)2 461 04 08
Fax: ++32 (0)2 461 00 31
Postbus 9712
NL-4801 LV BREDA
Tel.: ++31 (0)76 5217 957
Fax: ++31 (0)76 5217 959
France
EURO PEP Paris
Les Bureaux du Manoir
18 Chemin du Fond du Chêne
F-78 620 L’ETANG LA VILLE
Tel.: ++33 (0) 1 39 16 10 30
Fax: ++33 (0) 1 39 16 10 25
VMOD-4D
EVisit our home page at: http://www.pep.com
VMOD-4D
VMOD-4D
Versatility: Accepts any 4 industrial I/O ModPacks
Host Interface: A24/A16:D16/D8, slave VMEbus
Address Range: 128 bytes A1-A6 or 2kByte A1-A11 available to each
ModPack to enable additional decoding
Address Modifier: Standard supervisor/user data or short supervisor/
user data access via jumpers
Address Pipelining: Support for “address pipelining” is provided
Data Bus: Full 8/16-bit data bus, plus all extended control lines
to the ModPack
Interrupt Request: IRQ 1-7, jumper selectable. Interrupt vector generat-
ed by the ModPack or via jumper setting
DTACK Generation: Generated by each of the fitted ModPacks
Power Req.: +5V DC (±5%), 180mA typically. without ModPacks
Dimensions: 6U 233.35mm x 160mm x 20.4mm (4HP)
Front Panel: One or two 50-pin D-Sub connectors
Temp. Ranges: 0ºC to +70ºC
-40ºC to +85ºC (extended E2)
-55ºC to +85ºC (storage)
Humidity: 5% to 95% non-condensing
Characteristics
The VMOD-4D was created to
provide systems designers with
a selection of dedicated I/O
interfaces from PEP’s large
palette of industrial ModPack
modules. Complete with one or
two 50-pin D-Sub front-panel
connectors, the VMOD-4D
offers an inherent resistance to
EMI radiation.
Industrial ModPacks provide a cost-
effective solution for a wide variety of
applications, tailoring the VMOD-4D
to precisely fit a particular input/out-
put requirement.
Each ModPack interface accesses an 8
or 16-bit data-bus, supports 11 address
and extended control (IRQ) lines and
provides separate interrupt lines.
Any four industrial I/O ModPacks
from an ever expanding range may be
fitted to cater for the needs of digital,
analog, communication or counter
functions. PEP’s open piggyback speci-
fication is documented also for cus-
tom solutions and is currently under-
going the process of standardization
through the VITA organization.
© PEP 1998:
™ All trademarks are recognised,Subject to change without notice
Publication Number AB 15146 DS-0298