DATA SH EET
Product specification
File under Integrated Circuits, IC06 December 1990
INTEGRATED CIRCUITS
74HC/HCT4053
Triple 2-channel analog
multiplexer/demultiplexer
For a complete data sheet, please also download:
•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
December 1990 2
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
FEATURES
•Low “ON” resistance:
80 Ω(typ.) at VCC −VEE = 4.5 V
70 Ω(typ.) at VCC −VEE = 6.0 V
60 Ω(typ.) at VCC −VEE = 9.0 V
•Logic level translation:
to enable 5 V logic to communicate
with ±5 V analog signals
•Typical “break before make” built in
•Output capability: non-standard
•ICC category: MSI
GENERAL DESCRIPTION
The 74HC/HCT4053 are high-speed Si-gate CMOS
devices and are pin compatible with the “4053” of the
“4000B” series. They are specified in compliance with
JEDEC standard no. 7A.
The 74HC/HCT4053 are triple 2-channel analog
multiplexers/demultiplexers with a common enable input
(E). Each multiplexer/demultiplexer has two independent
inputs/outputs (nY0 and nY1), a common input/output (nZ)
and three digital select inputs (S1 to S3).
With E LOW, one of the two switches is selected (low
impedance ON-state) by S1 to S3. With E HIGH, all
switches are in the high impedance OFF-state,
independent of S1 to S3.
VCC and GND are the supply voltage pins for the digital
control inputs (S1, to S3, and E). The VCC to GND ranges
are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The
analog inputs/outputs (nY0 and nY1, and nZ) can swing
between VCC as a positive limit and VEE as a negative limit.
VCC −VEE may not exceed 10.0 V.
For operation as a digital multiplexer/demultiplexer, VEE is
connected to GND (typically ground).
QUICK REFERENCE DATA
VEE = GND = 0 V; Tamb =25°C; tr=t
f= 6 ns
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
PD=C
PD ×VCC2×fi+∑{(CL+CS)×VCC2×fo} where:
fi= input frequency in MHz; fo= output frequency in MHz
∑ {(CL+CS)×VCC2×fo} = sum of outputs
CL= output load capacitance in pF; CS= max. switch capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI= GND to VCC
For HCT the condition is VI= GND to VCC −1.5 V
SYMBOL PARAMETER CONDITIONS TYPICAL UNIT
HC HCT
tPZH/ tPZL turn “ON” time CL= 15 pF; RL=1 kΩ; VCC =5 V
E to VOS 17 23 ns
Sn to VOS 21 21 ns
tPHZ/ tPLZ turn “OFF” time
E to VOS 18 20 ns
Sn to VOS 17 19 ns
CIinput capacitance 3.5 3.5 pF
CPD power dissipation capacitance per switch notes 1 and 2 36 36 pF
CSmax. switch capacitance
independent (Y) 5 5 pF
common (Z) 8 8 pF
December 1990 3
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
ORDERING INFORMATION
See
“74HC/HCT/HCU/HCMOS Logic Package Information”
.
PIN DESCRIPTION
PIN NO. SYMBOL NAME AND FUNCTION
2, 1 2Y0 to, 2Y1independent inputs/outputs
5, 3 3Y0 to, 3Y1independent inputs/outputs
6E enable input (active LOW)
7V
EE negative supply voltage
8 GND ground (0 V)
11, 10, 9 S1 to S3select inputs
12, 13 1Y0, 1Y1independent inputs/outputs
14, 15, 4 1Z to 3Z common inputs/outputs
16 VCC positive supply voltage
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
December 1990 4
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
APPLICATIONS
•Analog multiplexing and demultiplexing
•Digital multiplexing and demultiplexing
•Signal gating
FUNCTION TABLE
Note
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
INPUTS CHANNEL ON
ES
n
L
LL
HnY0−nZ
nY1 −nZ
H X none
Fig.4 Functional diagram.
Fig.5 Schematic diagram (one switch).
December 1990 5
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
Voltages are referenced to VEE = GND (ground = 0 V)
Note to ratings
To avoid drawing VCC current out of terminals nZ, when switch current flows in terminals nYn, the voltage drop across
the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminals nZ, no VCC current will flow out
of terminals nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at nYn and nZ may
not exceed VCC or VEE.
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER MIN. MAX. UNIT CONDITIONS
VCC DC supply voltage −0.5 +11.0 V
±IIK DC digital input diode current 20 mA for VI<−0.5 V or VI>VCC + 0.5 V
±ISK DC switch diode current 20 mA for VS<−0.5 V or VS>VCC + 0.5 V
±ISDC switch current 25 mA for −0.5 V <VS<VCC + 0.5 V
±IEE DC VEE current 20 mA
±ICC; ±IGND DC VCC or GND current 50 mA
Tstg storage temperature range −65 +150 °C
Ptot power dissipation per package for temperature range: −40 to + 125 °C
74HC/HCT
plastic DIL 750 mW above + 70 °C: derate linearly with 12 mW/K
plastic mini-pack (SO) 500 mW above + 70 °C: derate linearly with 8 mW/K
PSpower dissipation per switch 100 mW
SYMBOL PARAMETER 74HC 74HCT UNIT CONDITIONS
min. typ. max. min. typ. max.
VCC DC supply voltage VCC−GND 2.0 5.0 10.0 4.5 5.0 5.5 V see Figs 6 and 7
VCC DC supply voltage VCC−VEE 2.0 5.0 10.0 2.0 5.0 10.0 V see Figs 6 and 7
VIDC input voltage range GND VCC GND VCC V
VSDC switch voltage range VEE VCC VEE VCC V
Tamb operating ambient temperature
range −40 +85 −40 +85 °Csee DC and AC
CHARACTERISTICS
Tamb operating ambient temperature
range −40 +125 −40 +125 °C
tr, tfinput rise and fall times 6.0
1000
500
400
250
6.0 500 ns
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
VCC = 10.0 V
December 1990 6
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
Fig.6 Guaranteed operating area as a function of
the supply voltages for 74HC4053. Fig.7 Guaranteed operating area as a function
of the supply voltages for 74HCT4053.
DC CHARACTERISTICS FOR 74HC/HCT
For 74HC: VCC −GND or VCC −VEE = 2.0, 4.5, 6.0 and 9.0 V
For 74HCT: VCC −GND = 4.5 and 5.5 V; VCC −VEE = 2.0, 4.5, 6.0 and 9.0 V
Notes to the characteristics
1. At supply voltages (VCC −VEE) approaching 2.0 V the analog switch ON-resistance becomes extremely non-linear.
Therefore it is recommended that these devices be used to transmit digital signals only, when using these supply
voltages.
2. For test circuit measuring RON see Fig.8.
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC/HCT VCC
(V) VEE
(V) IS
(µA) Vis VI
+ 25 −40 to +85 −40 to +125
min. typ. max. min. max. min. max.
RON ON resistance
(peak) −
100
90
70
−
180
160
130
−
225
200
165
−
270
240
195
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
100
1000
1000
1000
VCC
to
VEE
VIH
or
VIL
RON ON resistance
(rail) 150
80
70
60
−
140
120
105
−
175
150
130
−
210
180
160
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
100
1000
1000
1000
VEE VIH
or
VIL
RON ON resistance
(rail) 150
90
80
65
−
160
140
120
−
200
175
150
−
240
210
180
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
100
1000
1000
1000
VCC VIH
or
VIL
∆RON maximum ∆ON
resistance
between any two
channels
−
9
8
6
Ω
Ω
Ω
Ω
2.0
4.5
6.0
4.5
0
0
0
−4.5
VCC
to
VEE
VIH
or
VIL
December 1990 7
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
DC CHARACTERISTICS FOR 74HC
Voltages are referenced to GND (ground = 0 V)
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC VCC
VVEE
VVIOTHER
+25 −40 to +85 −40 to +125
min. typ. max. min. max. min. max.
VIH HIGH level input
voltage 1.5
3.15
4.2
6.3
1.2
2.4
3.2
4.7
1.5
3.15
4.2
6.3
1.5
3.15
4.2
6.3
V 2.0
4.5
6.0
9.0
VIL LOW level input
voltage 0.8
2.1
2.8
4.3
0.5
1.35
1.8
2.7
0.5
1.35
1.8
2.7
0.5
1.35
1.8
2.7
V 2.0
4.5
6.0
9.0
±IIinput leakage
current 0.1
0.2 1.0
2.0 1.0
2.0 µA 6.0
10.0 0
0VCC
or
GND
±ISanalog switch
OFF-state
current per
channel
0.1 1.0 1.0 µA 10.0 0 VIH
or
VIL
VS=
VCC −VEE
(see Fig.10)
±ISanalog switch
OFF-state current
all channels
0.1 1.0 1.0 µA 10.0 0 VIH
or
VIL
VS=
VCC −VEE
(see Fig.10)
±ISanalog switch
ON-state
current
0.1 1.0 1.0 µA 10.0 0 VIH
or
VIL
VS=
VCC −VEE
(see Fig.11)
ICC quiescent supply
current 8.0
16.0 80.0
160.0 160.0
320.0 µA 6.0
10.0 0
0VCC
or
GND
Vis =V
EE
or VCC;
VOS =V
CC
or VEE
December 1990 8
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
AC CHARACTERISTICS FOR 74HC
GND = 0 V; tr=t
f= 6 ns; CL= 50 pF
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC VCC
(V) VEE
(V) OTHER
+25 −40 to +85 −40 to +125
min.typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
Vis to Vos
15
5
4
4
60
12
10
8
75
15
13
10
90
18
15
12
ns 2.0
4.5
6.0
4.5
0
0
0
−4.5
RL=∞;
CL= 50 pF
(see Fig.18)
tPZH/ tPZL turn “ON” time
E to Vos
60
20
16
15
220
44
37
31
275
55
47
39
330
66
56
47
ns 2.0
4.5
6.0
4.5
0
0
0
−4.5
RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
tPZH/ tPZL turn “ON” time
Sn to Vos
75
25
20
15
220
44
37
31
275
55
47
39
330
66
56
47
ns 2.0
4.5
6.0
4.5
0
0
0
−4.5
RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ turn “OFF” time
E to Vos
63
21
17
15
210
42
36
29
265
53
45
36
315
63
54
44
ns 2.0
4.5
6.0
4.5
0
0
0
−4.5
RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ turn “OFF” time
Sn to Vos
60
20
16
15
210
42
36
29
265
53
45
36
315
63
54
44
ns 2.0
4.5
6.0
4.5
0
0
0
−4.5
RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
December 1990 9
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
DC CHARACTERISTICS FOR 74HCT
Voltages are referenced to GND (ground = 0 V)
Note to HCT types
1. The value of additional quiescent supply current (∆ICC) for a unit load of 1 is given here.
To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below.
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HCT VCC
(V) VEE
(V) VIOTHER
+25 −40 to +85 −40 to +125
min. typ. max. min. max. min. max.
VIH HIGH level input
voltage 2.0 1.6 2.0 2.0 V 4.5
to
5.5
VIL LOW level input
voltage 1.2 0.8 0.8 0.8 V 4.5
to
5.5
±IIinput leakage
current 0.1 1.0 1.0 µA5.5 0VCC
or
GND
±ISanalog switch
OFF-state
current per
channel
0.1 1.0 1.0 µA10.0 0V
IH
or
VIL
VS=
VCC −VEE
Fig.10
±ISanalog switch
OFF-state
current all
channels
0.1 1.0 1.0 µA10.0 0V
IH
or
VIL
VS=
VCC −VEE
Fig.10
±ISanalog switch
ON-state current 0.1 1.0 1.0 µA10.0 0V
IH
or
VIL
VS=
VCC −VEE
Fig.11
ICC quiescent supply
current 8.0
16.0 80.0
160.0 160.0
320.0 µA5.5
5.0 0
−5.0 VCC
or
GND
Vis =V
EE
or VCC;
VOS =V
CC
or VEE
∆ICC additional
quiescent supply
current per input
pin for unit load
coefficient is 1
(note 1)
100 360 450 490 µA4.5
to
5.5
0V
CC
−2.1
V
other
inputs
at VCC or
GND
INPUT UNIT LOAD COEFFICIENT
Sn
E0.50
0.50
December 1990 10
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
AC CHARACTERISTICS FOR 74HCT
GND = 0 V; tr=t
f= 6 ns; CL= 50 pF
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HCT VCC
(V) VEE
(V) OTHER
+25 −40 to +85 −40 to +125
min.typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
Vis to Vos
5
412
815
10 18
12 ns 4.5
4.5 0
−4.5 RL=∞;
CL= 50 pF
(see Fig.18)
tPZH/ tPZL turn “ON” time
E to Vos
27
16 48
34 60
43 72
51 ns 4.5
4.5 0
−4.5 RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
tPZH/ tPZL turn “ON” time
Sn to Vos
25
16 48
34 60
43 72
51 ns 4.5
4.5 0
−4.5 RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ turn “OFF” time
E to Vos
24
15 44
31 55
39 66
47 ns 4.5
4.5 0
−4.5 RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
tPHZ/ tPLZ turn “OFF” time
Sn to Vos
22
15 44
31 55
39 66
47 ns 4.5
4.5 0
−4.5 RL=1 kΩ;
C
L= 50 pF
(see Figs 19,
20 and 21)
December 1990 11
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
Fig.8 Test circuit for measuring RON. Fig.9 Typical RON as a function of input voltage
Vis for Vis = 0 to VCC −VEE.
Fig.10 Test circuit for measuring OFF-state current.
Fig.11 Test circuit for measuring ON-state current.
December 1990 12
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT
Recommended conditions and typical values
GND = 0 V; Tamb =25°C
Notes to the AC characteristics
1. Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω).
2. Adjust input voltage Vis to 0 dBm level at VOS for 1 MHz (0 dBm = 1 mW into 50 Ω).
General note
Vis is the input voltage at an nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at an nYn or nZ terminal, whichever is assigned as an output
SYMBOL PARAMETER typ. UNIT VCC
(V) VEE
(V) Vis(p-p)
(V) CONDITIONS
sine-wave distortion
f = 1 kHz 0.04
0.02 %
%2.25
4.5 −2.25
−4.5 4.0
8.0 RL= 10 kΩ; CL= 50 pF
(see Fig.14)
sine-wave distortion
f = 10 kHz 0.12
0.06 %
%2.25
4.5 −2.25
−4.5 4.0
8.0 RL= 10 kΩ; CL= 50 pF
(see Fig.14)
switch “OFF” signal
feed-through −50
−50 dB
dB 2.25
4.5 −2.25
−4.5 note 1 RL= 600 Ω; CL= 50 pF
f = 1 MHz see (Fig.12 and 15)
crosstalk between
any two switches/
multiplexers
−60
−60 dB
dB 2.25
4.5 −2.25
−4.5 note 1 RL= 600 Ω; CL= 50 pF;
f = 1 MHz (see Fig.16)
V(p−p) crosstalk voltage between
control and any switch
(peak-to-peak value)
110
220 mV
mV 4.5
4.5 0
−4.5 RL= 600 kΩ; CL= 50 pF;
f = 1 MHz (E or Sn,
square-wave between VCC
and GND, tr=t
f= 6 ns
(see Fig.17)
fmax minimum frequency response
(−3dB) 160
170 MHz
MHz 2.25
4.5 −2.25
−4.5 note 2 RL=50Ω; CL= 10 pF
(see Fig.13 and 14)
CSmaximum switch capacitance
independent (Y)
common (Z)
5
8pF
pF
December 1990 13
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
Fig.12 Typical switch “OFF” signal feed-through as a function of frequency.
Test conditions:
VCC = 4.5 V; GND = 0 V; VEE =−4.5 V;
RL=50Ω; Rsource =1 kΩ.
Fig.13 Typical frequency response.
Test conditions:
VCC = 4.5 V; GND = 0 V; VEE =−4.5 V;
RL=50Ω; Rsource =1 kΩ.
Fig.14 Test circuit for measuring sine-wave
distortion and minimum frequency
response.
Fig.15 Test circuit for measuring switch “OFF”
signal feed-through.
December 1990 14
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
Fig.16 Test circuits for measuring crosstalk between any two switches/multiplexers.
(a) channel ON condition (b) channel OFF condition
Fig.17 Test circuit for measuring crosstalk between control and any switch.
The crosstalk is defined as follows
(oscilloscope output):
December 1990 15
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
AC WAVEFORMS
Fig.18 Waveforms showing the input (Vis) to output (Vos) propagation delays.
Fig.19 Waveforms showing the turn-ON and turn-OFF times.
(1) HC : VM= 50%; VI= GND to VCC.
HCT: VM= 1.3 VI= GND to 3 V.
December 1990 16
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
TEST CIRCUIT AND WAVEFORMS
Fig.20 Test circuit for measuring AC performance.
Conditions
TEST SWITCH VIS
tPZH
tPZL
tPHZ
tPLZ
others
VEE
VCC
VEE
VCC
open
VCC
VEE
VCC
VEE
pulse
FAMILY AMPLITUDE VM
tr; tf
fmax;
PULSE WIDTH OTHER
74HC VCC 50% <2 ns 6 ns
74HCT 3.0 V 1.3 V <2 ns 6 ns
CL= load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values).
RT= termination resistance should be equal to the output impedance ZO of the pulse generator.
tr=t
f= 6 ns; when measuring fmax, there is no constraint to tr, tf with 50% duty factor.
Fig.21 Input pulse definitions.
Conditions
TEST SWITCH VIS
tPZH
tPZL
tPHZ
tPLZ
others
VEE
VCC
VEE
VCC
open
VCC
VEE
VCC
VEE
pulse
FAMILY AMPLITUDE VM
tr; tf
fmax;
PULSE WIDTH OTHER
74HC VCC 50% <2 ns 6 ns
74HCT 3.0 V 1.3 V <2 ns 6 ns
CL= load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values).
RT= termination resistance should be equal to the output impedance ZO of the pulse generator.
tr=t
f= 6 ns; when measuring fmax, there is no constraint to tr, tf with 50% duty factor.
December 1990 17
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
PACKAGE OUTLINES
See
“74HC/HCT/HCU/HCMOS Logic Package Outlines”
.
Philips Semiconductors - PIP - 74HC/HCT4053; Triple 2-channel analog multiplexer/demultiplexer
Philips Semiconductors Home
Product
catalog
Buy
online
MySemiconductors
Contact
Products
•MultiMarket
Semiconductors
•Product Selector
•Catalog by
Function
•Catalog by
System
•Cross-reference
•Packages
•End of Life
information
•Distributors Go
Here!
•Models
•SoC solutions
Product Information
74HC/HCT4053; Triple 2-
channel analog
multiplexer/demultiplexer
Information as of 2003-04-22
My.Semiconductors.COM.
Your personal service from
Philips Semiconductors.
Please register now !
Stay informed
Use right mouse button to
download datasheet
Download datasheet
General description Features Applications Datasheet
Block diagram Buy online Support & tools Email/translate
Products & packages Parametrics Similar products
top
General description
The 74HC/HCT4053 are high-speed Si-gate CMOS devices and are pin compatible with the '4053' of the '4000B' series. They
are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT4053 are triple 2-channel analog multiplexers/demultiplexers with a common enable input (E). Each
multiplexer/demultiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital
select inputs (S1 to S3).
With E LOW, one of the two switches is selected (low impedance ON-state) by S1 to S3. With E HIGH, all switches are in the high impedance OFF-state, independent of S1 to S3 .
VCC and GND are the supply voltage pins for the digital control inputs (S1, to S3, and E). The VCC to GND ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The analog inputs/outputs (nY0
and nY1, and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V.
For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC4053N.html (1 of 5) [Apr-29-2003 2:25:28 PM]
Philips Semiconductors - PIP - 74HC/HCT4053; Triple 2-channel analog multiplexer/demultiplexer
top
Features
● Low 'ON' resistance:
80 Ω (typ.) at VCC - VEE = 4.5 V
70 Ω (typ.) at VCC - VEE = 6.0 V
60 Ω (typ.) at VCC - VEE = 9.0 V
● Logic level translation: to enable 5 V logic to communicate with ± 5 V analog signals
● Typical 'break before make' built in
● Output capability: non-standard
● ICC category: MSI
top
Applications
Download
PDF
File
AN97022_1: TDA8752 Demonstration board documentation (date 16-Dec-02)
top
Datasheet
Type number Title Publication
release date Datasheet status Page
count File
size
(kB)
Datasheet
74HC/HCT4053 Triple 2-channel analog
multiplexer/demultiplexer 12/1/1990 Product
specification 17 121
Download
PDF
File
Download
Additional datasheet info
To complete the device datasheet with package and family information, also download the following PDF files. The "Logic
Package Information" document is required to determine in which package(s) this device is available.
Document Description
1
Download
PDF
File
HCT_FAMILY_SPECIFICATIONS HC/T Family Specifications, The IC06 74HC/HCT/HCMOS Logic Family
Specifications
2
Download
HCT_PACKAGE_INFO HC/T Package Info, The IC06 74HC/HCT/HCMOS Logic Package Information
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC4053N.html (2 of 5) [Apr-29-2003 2:25:28 PM]
Philips Semiconductors - PIP - 74HC/HCT4053; Triple 2-channel analog multiplexer/demultiplexer
PDF
File
3
Download
PDF
File
HCT_PACKAGE_OUTLINES HC/T Package Outlines, The IC06 74HC/HCT/HCMOS Logic Package
Outlines
top
Parametrics
Type number Package Description Propagation
Delay(ns) Voltage No.
of
Pins
Power
Dissipation
Considerations
Logic
Switching
Levels
Output
Drive
Capability
74HC4053D SOT109
(SO16) Triple 2-Channel Analog
Multiplexer/Demultiplexer 10~15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
74HC4053DB SOT338-1
(SSOP16) Triple 2-Channel Analog
Multiplexer/Demultiplexer 10~15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
74HC4053N SOT38-1
(DIP16) Triple 2-Channel Analog
Multiplexer/Demultiplexer 10~15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
74HC4053PW SOT403-1
(TSSOP16) Triple 2-Channel Analog
Multiplexer/Demultiplexer 10~15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
74HCT4053D SOT109
(SO16)
Triple 2-Channel Analog
Multiplexer/Demultiplexer;
TTL Enabled 10~15 5 Volts
+16 Low Power or
Battery
Applications TTL Low
74HCT4053DB SOT338-1
(SSOP16)
Triple 2-Channel Analog
Multiplexer/Demultiplexer;
TTL Enabled 10~15 5 Volts
+16 Low Power or
Battery
Applications TTL Low
74HCT4053N SOT38-1
(DIP16)
Triple 2-Channel Analog
Multiplexer/Demultiplexer;
TTL Enabled 10~15 5 Volts
+16 Low Power or
Battery
Applications TTL Low
74HCT4053PW SOT403-1
(TSSOP16)
Triple 2-Channel Analog
Multiplexer/Demultiplexer;
TTL Enabled 10~15 5 Volts
+16 Low Power or
Battery
Applications TTL Low
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC4053N.html (3 of 5) [Apr-29-2003 2:25:28 PM]
Philips Semiconductors - PIP - 74HC/HCT4053; Triple 2-channel analog multiplexer/demultiplexer
top
Products, packages, availability and ordering
Type number North American
type number Ordering code
(12NC) Marking/Packing
Download
PDF
File
Discretes packing
info
Package Device status Buy online
74HC4053D 74HC4053D 9337 148 40652 Standard Marking *
Bulk Pack, CECC SOT109
(SO16) Full production
order this
product
online
-
74HC4053D-T 9337 148 40653 Standard Marking *
Reel Pack, SMD,
13", CECC
SOT109
(SO16) Full production
order this
product
online
-
74HC4053DB 74HC4053DB 9351 668 00112 Standard Marking *
Bulk Pack SOT338-1
(SSOP16) Full production
order this
product
online
-
74HC4053DB-T 9351 668 00118 Standard Marking *
Reel Pack, SMD,
13"
SOT338-1
(SSOP16) Full production
order this
product
online
-
74HC4053N 74HC4053N 9336 697 60652 Standard Marking *
Bulk Pack, CECC SOT38-1
(DIP16) Full production
order this
product
online
-
74HC4053PW 74HC4053PW 9351 869 40112 Standard Marking *
Bulk Pack SOT403-1
(TSSOP16) Full production
order this
product
online
-
74HC4053PW-T 9351 869 40118 Standard Marking *
Reel Pack, SMD,
13"
SOT403-1
(TSSOP16) Full production
order this
product
online
-
74HCT4053D 74HCT4053D 9337 153 20112 Standard Marking *
Bulk Pack SOT109
(SO16) Full production
order this
product
online
-
74HCT4053D-T 9337 153 20118 Standard Marking *
Reel Pack, SMD,
13"
SOT109
(SO16) Full production
order this
product
online
-
74HCT4053DB 74HCT4053DB 9351 667 80112 Standard Marking *
Bulk Pack SOT338-1
(SSOP16) Full production
order this
product
online
-
74HCT4053DB-T 9351 667 80118 Standard Marking *
Reel Pack, SMD,
13"
SOT338-1
(SSOP16) Full production
order this
product
online
-
74HCT4053N 74HCT4053N 9336 703 90112 Standard Marking *
Bulk Pack SOT38-1
(DIP16) Full production
order this
product
-
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC4053N.html (4 of 5) [Apr-29-2003 2:25:28 PM]
Philips Semiconductors - PIP - 74HC/HCT4053; Triple 2-channel analog multiplexer/demultiplexer
online
74HCT4053PW 74HCT4053PW 9351 884 80112 Standard Marking *
Bulk Pack SOT403-1
(TSSOP16) Full production
order this
product
online
-
74HCT4053PW-
T 9351 884 80118 Standard Marking *
Reel Pack, SMD,
13"
SOT403-1
(TSSOP16) Full production
order this
product
online
-
Products in the above table are all in production. Some variants are discontinued; click here for information on these variants.
top
Similar products
Products
similar
to
74HC/HCT4053
74HC/HCT4053 links to the similar products page containing an overview of products that are similar in function or
related to the type number(s) as listed on this page. The similar products page includes products from the same catalog tree(s),
relevant selection guides and products from the same functional category.
top
Support & tools
Download
PDF
File
I²C Bus Solutions - Industrial/Motor Control Applications: Numeric Control Machine(date 01-Jun-02)
Download
PDF
File
HC/T Family Specifications, The IC06 74HC/HCT/HCMOS Logic Family Specifications(date 01-Mar-98)
Download
PDF
File
HC/T User Guide(date 01-Nov-97)
top
Email/translate this product information
● Email this product information.
● Translate this product information page from English to:
The English language is the official language used at the semiconductors.philips.com website and webpages. All translations
on this website are created through the use of Google Language Tools and are provided for convenience purposes only. No
rights can be derived from any translation on this website.
About this Web Site
| Copyright © 2003 Koninklijke Philips N.V. All rights reserved. | Privacy Policy |
| Koninklijke Philips N.V. | Access to and use of this Web Site is subject to the following Terms of Use. |
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC4053N.html (5 of 5) [Apr-29-2003 2:25:28 PM]
French
Translate