Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC-T2240 Synthesized Signal Generator, 10 MHz to 40 GHz 2 Elizabeth Drive * Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.tm-hittite.com Instrumentation Product Support at TE@hittite.com HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v09.0714 Wide Frequency Range, 10 MHz to 40 GHz Signal Generator! The HMC-T2240 is an easy to implement test equipment solution designed to fulfill your signal generation needs. Built on a foundation of high quality and market leading Hittite MMICs, the HMC-T2240 provides the highest output power, lowest harmonic levels and broadest frequency range amongst signal generators of its size and cost. This compact and lightweight signal generator also features USB, GPIB and Ethernet interfaces ensuring carefree integration within various test environments while improving overall productivity and equipment utilization. Applications ATE Test & Measurement Synthesized Signal Generator R&D Laboratories 2 Advantages Versatile: Higher Drive Simplifies Test Set-Ups Efficient: 500 s Frequency Switching Reliable: Incorporates Hittite MMICs Flexible: Manual or Software Control Via USB, GPIB or Ethernet Performance High Output Power: +27 dBm @ 1 GHz Wide Frequency Range: 10 MHz to 40 GHz Excellent Phase Noise Performance: -98 dBc/Hz @ 10 kHz Offset @ 10 GHz Spurious Rejection: -70 dBc @ 10 GHz Power Resolution: 0.1 dB Frequency Resolution: 1 Hz 2 Elizabeth Drive * Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.tm-hittite.com Instrumentation Product Support at TE@hittite.com HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz Frequency v09.0714 Output Power Range @ 25C Accuracy: As Per Internal Ref. 1.5 ppm Resolution: 1 Hz Internal Reference: 10 MHz Aging Rate: <1 ppm/yr External Reference Input: 10 MHz (Sine) Internal Reference Output: 10 MHz (Square Wave) Frequency Switching Speed: 500 s 30 20 OUTPUT POWER (dBm) (Maximum Leveled) 0 -10 -20 -30 -40 -50 -60 Minimum Settable: -40 dBm Frequency (GHz) 0.01 0.1 0.5 1 5 10 15 20 25 30 40 10 0 4 8 12 16 20 24 28 32 36 40 FREQUENCY (GHz) Power Output (dBm) Max. Pout Min. Pout 24 26 27 27 25 23 23 19 20 22 20 SSB Phase Noise vs. Frequency 0 SSB PHASE NOISE (dBc/Hz) -20 Dynamic Range: >60 dB Resolution: 0.1 dB Power Accuracy: 1 dB > 500 MHz 2 dB 500 MHz 2 dB < -20 dBm (All Frequencies) RF OFF < -70 dBm -40 -60 -80 -100 -120 -140 -160 1e+1 1e+2 1e+3 1e+4 1e+5 1e+6 1e+7 OFFSET FREQUENCY (Hz) 10 MHz 100 MHz 500 MHz 1 GHz 5 GHz 10 GHz Spurious @ 10 dBm Output 15 GHz 20 GHz 25 GHz 30 GHz 40 GHz < -70 dBc @ Integer Frequencies < -65 dBc @ Fractional Frequencies <10 GHz < -57 dBc @ Fractional Frequencies 10-20 GHz < -52 dBc @ Fractional Frequencies > 20 GHz Harmonics Frequency (GHz) 0.01 0.05 0.1 0.5 1 2 5 10 15 20 25 SSB Phase Noise (dBc/Hz) 2nd Harmonics (dBc) -37 -30 -30 -35 -34 -30 -32 -34 -47 -55 -35 Output Power = +10 dBm 3rd Harmonics (dBc) -45 -42 -40 -58 -52 -48 -58 -68 -75 - Offset From Carrier Frequency (GHz) 10 Hz 100 Hz 1 kHz 0.01 0.10 0.50 1 5 10 15 20 25 30 40 -85 -88 -83 -79 -64 -57 -54 -52 -51 -50 -48 -95 -97 -95 -89 -76 -71 -66 -64 -61 -60 -57 -105 -106 -118 -112 -98 -93 -88 -86 -83 -83 -81 10 kHz 100 kHz 1 MHz 10 MHz -112 -114 -124 -118 -104 -98 -94 -92 -89 -88 -86 -107 -108 -124 -119 -105 -99 -94 -93 -87 -87 -87 Output Noise: Floor < -150 dBc/Hz 10 MHz to 20 GHz -126 -128 -139 -135 -124 -118 -111 -112 -102 -106 -107 -140 -142 -142 -144 -145 -142 -134 -137 -126 -128 -130 Synthesized Signal Generator Output Power 40 < -140 dBc/Hz 20 GHz to 40 GHz Above data is typical performance at +25C after 30 minutes of warm-up time unless otherwise stated. 2 Elizabeth Drive * Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.tm-hittite.com Instrumentation Product Support at TE@hittite.com 3 HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz General Specifications Frequency: Accuracy: For < 2.5 GHz, Reference +0/-90 nHz For > 2.5 GHz, Reference +0/-2.88 uHz Internal Reference: 1.5 ppm Resolution: 1 Hz Aging Rate: <1 ppm/yr External Reference Input: 10 MHz (Sine Wave) Internal Reference Output: 10 MHz (Square Wave) Frequency Switching Speed: 500 s Synthesized Signal Generator RF Output Power Change Versus Temperature: 10 MHz to 5 GHz 0.10 dB/C 5 GHz to 15 GHz 0.125 dB/C 15 GHz to 20 GHz 0.20 dB/C 20 GHz to 40 GHz 0.10 dB/C Power - AC: 100 to 240 VAC @ 50 to 60 Hz Operating Temperature (for indoor use only): 0 to 35 C Storage Temperature: -20 to 70 C Cooling: 2 Internal Fans Fan Noise: < 50 dBa Mechanical Vibration & Shock: MIL PRF-288000 Class 4, non operating Compliance: CSA & CE Input / Output: 10 MHz REFOUT [1] 10 MHz REFIN [2] TRIGGER IN [3]: TTL TRIGGER OUT [3]: TTL RS-232 (used for field upgrades) Ethernet GPIB USB 2.0 RF Output 2.92mm Female Maximum DC voltage applied to RF Output: 8 Volts ECCN: EAR99 General Mechanical Characteristics H: 76.2 mm (3 in) W: 203 mm (8 in) D: 305 mm (12 in) Weight 3.6 kg (8 lbs) Warranty: 1 Year Parts and Labor [1] +10 dBm typ. into 50 Ohms; BNC Connector [2] +5 dBm max., -5 dBm min., 50 Ohms; BNC Connector [3] The trigger input can be driven from either 3.3V or 5V sources for direct interface with TTL signal levels; BNC Connector Above data is typical performance at +25C after 30 minutes of warm-up time unless otherwise stated. 4 2 Elizabeth Drive * Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.tm-hittite.com Instrumentation Product Support at TE@hittite.com v09.0714 HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v09.0714 HMC-T2240 Rear Panel I/O Connections Its compact size, light weight, fast switching speed and USB, GBIP and Ethernet control interfaces support the standard SCPI command set ensuring smooth integration within all test environments, particularly those associated with automated test. An installation disk that accompanies each unit includes all the drivers required to remotely control the device as well as a user friendly GUI interface (right) compatible with a Windows XP (R), Windows Vista(R) or Windows 7(R) or operating system. User control is facilitated via pull down menus that allow programming of single or swept modes in frequency or power. Integration of multiple units within a production test environment is easy, and affordable. Remote Interface Hardware: USB (Windows XP (R), Windows Vista(R), Windows 7(R) Drivers Supplied), GPIB or Ethernet Software: LabVIEW 2009 Driver Frequency Switching Speed: 500 us Typ. Local Interface Front Panel Rotary Knob & Display HMC-T2100 Compatibility To facilitate integration into existing HMC-T2100 applications, the HMC-T2240 has a HMC-T2100 compatibility mode. In this mode, the HMC-T2240 identifies itself as a HMC-T2100 so that the HMC-T2100 USB drivers will work for a HMC-T2240, and programs which use the *IDN? string will recognize a HMC-T2240 as a HMC-T2100. Frequency resolution, maximum and minimum values for power, and minimum sweep dwell time also change to match the HMCT2100. Synthesized Signal Generator Connectivity & Control Windows (R) - Windows XP (R) , Windows Vista (R) and Windows 7 (R) are registered trademarks of Microsoft Corporation. 2 Elizabeth Drive * Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.tm-hittite.com Instrumentation Product Support at TE@hittite.com 5 HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v09.0714 Two Tone Third Order Intercept Test Set-up HMC-T2240 I/O CONTROL HMC-T2240 Spectrum Analyzer RFIN HMC-T2240 RF Synthesized Signal Generator LO 6 DUT IF Device Under Test * Amplifiers * Mixers & Converters * Modulators * RFICs & Subsystems Efficient Mixer Conversion Loss, Isolation & MxN Spurious Test Set-up HMC-T2240 Device Under Test * Single or Double-Balanced Mixers * Up/Down Converters * I/Q Mixers LO DUT I/O CONTROL IF HMC-T2240 RF Spectrum Analyzer RFIN 2 Elizabeth Drive * Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.tm-hittite.com Instrumentation Product Support at TE@hittite.com HMC-T2240 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz v09.0714 HMC-T2240 Model Number HMC-T2240 Test Rack Mount Kit Description Price Synthesized Signal Generator 10 MHz to 40 GHz $19,498.00 Part Number Description Price HMC-RM02 Dual Rack Mounting Plate 19" 2u Chassis $385.00 Includes 100 - 240V AC Power Supply and one Power Cord at no cost. Please specify your preferred power cord part number at time of ordering. (see "Optional Power Cord" table) Power Cord Part Number Region HMC-PC01 Continental Europe HMC-PC02 United Kingdom HMC-PC03 China HMC-PC04 Australia, New Zealand HMC-PC05 North America HMC-PC06 South Africa / India HMC-PC07 Switzerland HMC-PC08 Denmark HMC-PC09 Israel HMC-PC10 Italy HMC-PC11 Japan Synthesized Signal Generator Ordering Information All pricing is in U.S. Dollars and is subject to change without notice. 2 Elizabeth Drive * Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.tm-hittite.com Instrumentation Product Support at TE@hittite.com 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC-T2240