Data Sheet
HL6714G
670nm / 10mW AlGaInP Laser Diode
Features Application
• Operation temperature: -10~+50°C
• Optical out put pow er : 10mW(CW)
• Visible lasing: 670nm Typ.
• Low operating voltage: 2.7V Max.
• Package: φ9mm
• Single transv erse mode
• TE mode oscillation
• Laser beam printer
• Measurement
• Sensing
Outline Internal Circuit
(flange)
Data Sheet HL6714G Rev0. Oct. 28. 2014
www.ushio-optosemi.com
Absolute M aximum Ratings (Tc=25°C)
Item Symbol Ratings Unit
Optical output power Po 10 mW
Pulse optical output power Po(pulse) 12* mW
LD Reverse Voltage VR(LD) 2 V
PD Reverse Voltage VR(PD) 30 V
Operating Temperature Topr -10 ~ +50 °C
Storage Temperature Tstg -40 ~ +85 °C
* Pulse condition: Pulse width≤1µs, duty≤50%
Optical and Electrical Characteristics (Tc=25°C)
Parameter Symbol Min Typ Max Unit Test Condition
Threshold current Ith 20 30 60 mA -
Operating voltage Vop - - 2.7 V Po=10mW
Slope efficie ncy ηs 0.3 0.5 0.8 mW/mA 6(mW)/(I(8mW)-I(2mW))
Beam diverge nce
Parallel to the junction
θ// 5 8 11 °
Po=10mW,
FWHM
Beam diverge nce
Perpendicul ar to the juncti on
θ⊥ 18 22 30 °
Po=10mW,
FWHM
Lasing Wavelength λp 660 670 680 nm Po=10mW
Monitor Current Is 0.3 0.9 1.5 mA
Po=10mW,
V
R(PD)
=5V
Data Sheet HL6714G Rev0. Oct. 28. 2014
www.ushio-optosemi.com
Typical Characteristic Curves
Data Sheet HL6714G Rev0. Oct. 28. 2014
www.ushio-optosemi.com
Cautions
1.USHIO OPTO SEMICONDUCTORS ,INC.(UOS) neither warrants nor grants licenses of any our lights or any third
party’s patent, copyright, trademark, or other intel lectual property rights for information contained in this document, UOS
bears no res ponsibility for problems that m ay arise with third party’s right, including intellectual property rights, in
connection with use of the information contained in this docum ent.
2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest
product standards or specific ations before final design, purchase or use.
3.UOS make s ever y atte mpt to ensure th at its pro ducts are of hig h quality and rel iabi lity . Howev er, contact our sales o ffi ce
before using the product in an application that demands especially high quality and reliability or where its failure or
malfunction may directly threat en hu man life or cause risk of bodily injury, such as aero spac e, aeronaut ics, nu clear power ,
combustion c ontrol, transportation, traffic safety equipment or medical equipment for life support.
4.Design your application so that the products is used within the ranges guaranteed by UOS. particularly for maximum
rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics.
UOS. bears no r e sp ons ibi lity f or f a ilur e or damage when us ed beyond the guaranteed ranges. E v e n w it hin th e g uar a ntee d
ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic
measures suc h as fail-safes , so that the equ ipment inc orpor ating UOS produ ct does not cause bodily injury, fire or other
consequenti al dam age due to oper at ion of the UOS product.
5.This product is not designed to be radiation resistant.
6.No one is permitted to reproduce or duplic ate, in any form, the whole or part of this docum ent without written approval
from UOS.
7.Contact our sales office for any questions regarding this document or UOS products.
1.The laser light is harmful to human body especially to eye no matter what directly or indirectly. The las er beam
shall be observed or adjusted through infrared camera or equivalent.
2.This product (without violet laser diode) contains gallium arsenide (GaAs ), which may seriously endanger your
health even at very low doses. Please avoid treatment which may create GaAs powder or gas, such as
disassembly or performing chemical experiments, when you handle the product. W hen disposing of the product,
please follow the laws of your country and separate it from other waste such as industrial waste and household
garbage.
Important Notice
Performanc e figures, data and any illustra tiv e material provid ed i n this data sh eet are typical an d mu st be spe cif ic ally confirmed
in writing by UOS before they become applicable to any particular order or contract. In accordance with the UOS policy of
continuous improvement specifications may change without notice. Further details are available from any UOS sales
representative.
Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
