TOSHIBA TC4584B P/BF/BFN TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC4584BP, TC4584BF, TC4584BFN TC4584B HEX SCHMITT TRIGGER (Note) The JEDEC SOP (FN) is not available in Japan. The TC4584B is the 6-circuit inverter having the Schmitt trigger function at the input terminal. That is, since the circuit threshold level voltages at the leading and trailing edges of input waveform are different (Vp,Vy), the TC4584B can be used in the broad range application including line receiver, waveform shaping circuit, astable multivibrator, monostable multivibrator, etc. In addition to ordinary inverter. Since the pins are compatible with the TC4069UB, the substitution is also possible. MAXIMUM RATINGS 14 P (DIP 14-P-300-2.54) Weight : 0.96g (Typ.) F (SOP14-P-300-1.27) Weight : 0.189 (Typ.) FN (SOL14-P-150-1.27) Weight : 0.129 (Typ.) CHARACTERISTIC SYMBOL RATING UNIT PIN ASSIGNMENT DC Supply Voltage Vop Veg - 0.5~Veg + 20 V LV Input Voltage Vin Vss 0.5~Vpp + 0.5 Vv 11 if P]i4 Vop Output Voltage Vout Vss5 0.5~Vpp + 0.5 V 01 LY 13 16 DC Input Current lin +10 mA Power Dissipation Pp | 300 (DIP)/ 180 (SOIC) | mw 2 3] fiz 06 Operating Temperature | + _A0~85 C o2 aL Pia 15 Range I3 sl Tio (05 Storage Temperature T _~65~150 Range stg 03 6L Y op 4 INPUT /OUTPUT VOLTAGE CHARACTERISTIC Vss 7L []s 04 VIN _{i>o Vout HYSTERESIS VOLTAGE VH =Vp- VN Vpp \ VIN Vp VN Vout Vss Vu m =Vbp Vout =Vsg 0 VN Vp Vin * INPUT-OUTPUT * TRANSFER VOLTAGE WAVEFORM CHARACTERISTICS (TOP VIEW) LOGIC DIAGRAM IN F>o Po ho OUT 961001EBA2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. 1997-12-11 1/5TOSHIBA TC4584BP/BF/BFN RECOMMENDED OPERATING CONDITIONS (Vss = OV) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNITS DC Supply Voltage Vop 3 18 Vv Input Voltage Vin 0 _ Vop V STATIC ELECTRICAL CHARACTERISTICS (Vss = OV) - 40C 25C 85C CHARACTERISTIC |symBoL| TEST CONDITION [Vp UNIT (v)| MIN. | max. | MIN. | TYP. | MAX. | MIN. | MAX. 5} 495 | | 495/500] | 495[ A ee ts . Von [our 14a 101 995| | 995]1000} | 995] P g IN= Vs Yop 15] 14.95 | | 14.95 [15.00 | [14.95 | - | 5} |oo5 | | ooo] 005 | | 0.05 eee its - Vou [our < 1A 10/ |005| | ooo} 005 | | 005 utpu 9 In = V'ss- VDD 15} | 005 | | 000] 005] | 0.05 Vou= 4.6V 5|-0.61] |[-o051/-1.0 | |-o42/ Vou= 2.5V 5}-2.50] |-210]/-40 | |-1.70] Output High Current} loy |Voy= 9.5V 10}-1.50| |-1.30}-2.2 _ -1.10]} Vou = 13.5V 15|-4.00] |-340/-90 | |-280]} Vin =Vss, Vop mA Vo. =0.4V 5} o61] | 051 | 15 | o04a2/ - Vo. =0.5V 10} 1.50} 1.30 | 3.8 - 1.10} Output Low Current | lo. Jy 4 5y 15] 400/ | 340/150 | | 280] Vin =Vss, Vop Positive Triager Vour = 0.5V 5] 2.05] 3.75] 2.15] 3.0 | 3.75 | 2.15 | 3.85 Threshold volta Vp | Voyr=1.0V 10! 4.80 | 7.60] 4.90] 6.4 | 7.60 | 4.90 | 7.70 9 Vour = 1.5V 15} 7.80 | 11.60] 7.90 | 9.9 |11.60 | 7.90 | 11.70 Negative Trieaer Vour = 4.5V 5. 1.25] 2.95] 1.25] 23 | 2.85 | 1.15 | 2.85 Threshold Vols Vy |Vour= 9.0V 10| 2.40 | 5.20] 2.40] 3.8 | 5.10} 2.30] 5.10] v 9 Vout = 13.5V 15| 3.40 | 7.20] 3.40] 5.2 | 7.10] 3.30] 7.10 51 0.10 | 1.25] 0.25|] 0.65 | 1.25 | 0.25 | 1.40 Hysteresis Voltage Vu 10} 1.80 3.50 | 1.90 | 2.60 | 3.50} 1.90 | 3.60 15| 3.70 | 5.60] 3.80] 4.70 | 5.60 | 3.80 | 5.70 "H"Level} lin | Vi = 18V 18] 01] 10-5} 0.1 - 1.0 Input uA Current fi tevell i, |v, =0V 18) | -01/ |-10-5}-01} - |-1.0 Quiescent Suppl 5] 1 |o0oo1] 1 [75 Current pe lbp | Vin=Vss, Vp * 10; 2 _ 0.002 2 _ 15.0 LA 4 15] 4 |0004] 4 |30.0 * All valid input combinations. 961001EBA2" @ The products described in this document are subject to foreign exchange and foreign trade control laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1997-12-11 2/5TOSHIBA TC4584B P/BF/BFN DYNAMIC ELECTRICAL CHARACTERISTICS (Ta = 25C, Vss =0V, C, = 50pF) CHARACTERISTIC SYMBOL| TEST CONDITION VontV) MIN. TYP. MAX. UNIT Output Transition Time > _ 80 200 (Low to High) tru 10 ~~ 30 100 g 15 _ 40 80 Output Transition Time > _ 80 200 (High to Low) tH 10 7 50 100 ns g 15 _ 40 80 t 5 _ 170 340 Propagation Delay Time . 10 80 160 pat 15 60 120 Input Capacitance Cin _ 5 7.5 pF CIRCUIT AND WAVEFORM FOR MEASUREMENT OF DYNAMIC CHARACTERISTICS CIRCUIT WAVEFORM 20ns 20ns V 90% DD INPUT 50% : \. 10% INPUT OUTPUT tol P.G. 7 a Ty CL = 50pF OUTPUT 50% 0% tTHL tTLH 1997-12-11 3/5TOSHIBA TC4584B P/BF/BFN DIP 14PIN OUTLINE DRAWING (DIP14-P-300-2.54) Unit in mm 14 8 5 Pq) 2 CY TIC CT CI Te 1 7 19.75MAX ; 19.2520.2 | 2.005TYP. 1.4401 0.540.1 I ~] (saa los grasa Weight : 0.96g (Typ.) Unit in mm SOP 14PIN (200mil BODY) OUTLINE DRAWING (SOP14-P-300-1.27) 14 8 HH 4 HH HE 5.340.2 7.840.3 (300mil) | E HAG , 1 7 1.34TYP 0.4320.1 fb] 0.25 Gl 10.8MAX 10.320.2 COC 1,540.2 1.9MAX 0.15%945 wy =o 0.1] #9 3 0.830.2 Weight : 0.18g (Typ.) 1997-12-11 4/5TOSHIBA TC4584B P/BF/BFN SOP 14PIN (150mil BODY) OUTLINE DRAWING (SOL14-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 14 8 0.515TYP 8.65+0.1 N rE B-k } et t0 eo] 5 Fi yy; 3 x 1 _ oa 0.70.3 Weight : 0.129 (Typ.) 1997-12-11 5/5