JQ CONNECTOR 2.5mm pitch/Board-to-board connectors 5 JS T Specifications ------------------- * High contact pressure * Box-shaped shroud * Secure locking on printed circuit boards * Vertical, horizontal and parallel mounting * Interchangeability * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 2 R50088587 Top entry type Side entry type 2.5 0.05 2.5 min Receptacle: 2.6max Shrouded header: 7.6max 0.9 0.1 0 Shrouded header Side entry type 6 11.8 0.9 0.1 0 Top entry type 3.4 5.75 16.3 16.3 Receptacle: 2.6min Shrouded header: 3.4min Receptacle Combinations 12.4 2.5 min Side entry type S( )B-XH-A-1 Top entry type B( )B-XH-A 2.5 0.05 6.15 This 2.5mm pitch connector is used to interconnect printed circuit boards. It easily resists distortion during mating, thus ensuring reliable contact, even under adverse conditions. * Current rating: 3A AC, DC * Voltage rating: 250V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 10m max. After environmental testing/ 20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,000V AC/minute * Applicable PC board thickness: 1.6mm 2.6 max 2.9 6.15 10.2 2.2 Note: 1. The above figure is the figure viewed from soldering side. 2. Tolerances are non-cumulative: 0.05mm for all centers. 3. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 JQ CONNECTOR Receptacle Top entry type Circuits 3 4 B 5 A 2.5 6 2.5 7 6 1 2.7 1.5 4.1 8 1.6 C 9 10 11 4.8 12 9.5 13 15 Model No. Top entry type Side entry type 03JQ-BT 03JQ-ST 04JQ-BT 04JQ-ST 05JQ-BT 05JQ-ST 06JQ-BT 06JQ-ST 07JQ-BT 07JQ-ST 08JQ-BT 08JQ-ST 09JQ-BT 09JQ-ST 10JQ-BT 10JQ-ST 11JQ-BT 11JQ-ST 12JQ-BT 12JQ-ST 13JQ-BT 13JQ-ST 15JQ-BT 15JQ-ST A Dimensions (mm) B C Q'ty / box Top entry Side entry type type 5.0 10.0 8.2 500 500 7.5 12.5 10.7 500 500 10.0 15.0 13.2 500 500 12.5 17.5 15.7 500 500 15.0 20.0 18.2 250 250 17.5 22.5 20.7 200 250 20.0 25.0 23.2 200 250 22.5 27.5 25.7 250 250 25.0 30.0 28.2 250 250 27.5 32.5 30.7 200 200 30.0 35.0 33.2 200 200 35.0 40.0 38.2 100 100 Material and Finish Side entry type Contact: Phosphor bronze, tin-plated (reflow treatment) Housing: PA 66, UL94V-0, natural RoHS compliance B A 2.5 6 1 1.5 4.1 2.5 1.6 2.6 2.2 C 9.5 Shrouded header Top entry type Circuits 0.64 3 4 8 7 5 JST 6 3.4 7 9 2.35 2.5 10 5.75 A 2.45 8 11 B 12 13 14 Side entry type 15 0.64 Model No. Top entry type Side entry type B3B-XH-A S3B-XH-A-1 B4B-XH-A S4B-XH-A-1 B5B-XH-A S5B-XH-A-1 B6B-XH-A S6B-XH-A-1 B7B-XH-A S7B-XH-A-1 B8B-XH-A S8B-XH-A-1 B9B-XH-A S9B-XH-A-1 B10B-XH-A S10B-XH-A-1 B11B-XH-A S11B-XH-A-1 B12B-XH-A S12B-XH-A-1 B13B-XH-A S13B-XH-A-1 B14B-XH-A S14B-XH-A-1 B15B-XH-A S15B-XH-A-1 Dimensions (mm) Q'ty / box A B Top entry type Side entry type 5.0 9.9 1,000 1,000 7.5 12.4 500 500 10.0 14.9 500 500 12.5 17.4 500 500 15.0 19.9 500 250 17.5 22.4 500 250 20.0 24.9 500 250 22.5 27.4 250 250 25.0 29.9 250 250 27.5 32.4 250 200 30.0 34.9 250 200 32.5 37.4 250 200 35.0 39.9 250 200 Material and Finish 7.6 JST 11.5 7 8 RoHS compliance This product displays (LF)(SN) on a label. 2.5 2.45 A B 2 Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) 6.1 3.4