SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER DF15005M THRU DF1510M VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.5 Ampere FEATURES * * * * high forward surge current capability Glass passivated chip junction High case dielectric strength High temperature soldering guaranteed: 260OC / 10 seconds MECHANICAL DATA * * * * * Case: Transfer molded plastic Terminal: Lead solderable per MIL-STD-750 method 2026 Polarity: Polarity symbols marked on case Mounting: any Weight: 0.04 ounce, 1.0 gram DFM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS * * * Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS VRRM VRMS VDC Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage DF DF DF DF DF DF DF 15005M 1501M 1502M 1504M 1506M 1508M 1510M 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 UNIT Volts Volts Volts Maximum Average Forward Rectified Current, 0.06" (1.5mm) lead length at TA = 40OC (Note 1) Peak Forward Surge Current I(AV) 1.5 Amps 8.3mS single half sine wave superimposed on IFSM 50 Amps Rating for Fusing (t<8.3mS) I2t 10 A2s Maximum Instantaneous Forward Voltage drop per Bridge element 1.5A Maximum DC Reverse Current at Rated TA = 25 OC VF 1.1 Volts IR 10 0.5 A mA CJ 25 pF RJC TJ TSTG 40 (-55 to +150) (-55 to +150) rated load (JEDEC method) DC Blocking Voltage per element O TA = 125 C Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range Notes: 1. Unit mounted on PCB with 0.51" X 0.51" (13mm X 13mm) copper pads Sep-03, Rev A Micro Electronic Instrument Inc. O C/W O C O C RATINGS AND CHARACTERISTIC CURVES DF15005M THRU DF1510M Sep-03, Rev A Micro Electronic Instrument Inc.