SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
DF15005M THRU DF1510M CURRENT 1.5 Ampere
FEATURES
DFM
• high forward surge current capability
• Glass passivated chip junction
• High case dielectric strength
• High temperature soldering guaranteed:
260OC / 10 seconds
MECHANICAL DATA
• Case: Transfer molded plastic
• Terminal: Lead solderable per MIL-STD-750
method 2026
• Polarity: Polarity symbols marked on case
• Mounting: any
• Weight: 0.04 ounce, 1.0 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS DF
15005M
DF
1501M
DF
1502M
DF
1504M
DF
1506M
DF
1508M
DF
1510M UNIT
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum Average Forward Rectified Current,
0.06” (1.5mm) lead length at TA = 40OC (Note 1) I(AV) 1.5 Amps
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
IFSM 50 Amps
Rating for Fusing (t<8.3mS) I2t 10 A2s
Maximum Instantaneous Forward Voltage drop per
Bridge element 1.5A VF 1.1 Volts
10 µA
Maximum DC Reverse Current at Rated TA = 25 OC
DC Blocking Voltage per element TA = 125 OC IR 0.5 mA
Typical Junction Capacitance
(Measured at 1.0MHz and applied reverse voltage of
4.0V)
CJ 25 pF
Typical Thermal Resistance (Note 1) RθJC 40
OC/W
Operating Junction Temperature Range TJ (-55 to +150) OC
Storage Temperature Range TSTG(-55 to +150) OC
Notes:
1. Unit mounted on PCB with 0.51” X 0.51” (13mm X 13mm) copper pads
Sep-03, Rev A Micro Electronic Instrument Inc.
RATINGS AND CHARACTERISTIC CURVES DF15005M THRU DF1510M
Sep-03, Rev A Micro Electronic Instrument Inc.
