KBP201 THRU KBP207 Single Phase 2.0 AMPS. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes KBP .460(11.68) .420(10.6) Features AC .5 (12.7) MIN .035(0.9) .028(0.7) UL Recognized File # E-96005 Glass passivated junction Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260 / 10 seconds at 5 lbs. ( 2.3 Kg ) tension Small size, simple installation Leads solderable per MIL-STD-202, Method 208 .160(4.1) SPACING .140(3.6) .600(15.24) .560(14.22) .153(3.9) .146(3.7) .050(1.27) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol KBP KBP KBP Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA = 50 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range VRRM VRMS VDC 201 202 203 KBP 204 KBP 205 KBP 206 KBP 207 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 Units V V V I(AV) 2.0 A IFSM 60 A VF 1.2 V IR 10 500 25 8 -55 to +125 -55 to +150 uA uA /W RJA RJL TJ TSTG Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. With 0.47 x 0.47" (12 x 12mm) Copper Pads. - 592 - RATINGS AND CHARACTERISTIC CURVES (KBP201 THRU KBP207) 2.0 AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 60 50 40 30 20 10 0 1 2 4 6 20 10 40 60 1.5 1.0 0.5 0 100 20 40 NUMBER OF CYCLES AT 60Hz 80 100 120 o FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS REVERSE CURRENT. ( A) 10.0 INSTANTANEOUS FORWARD CURRENT. (A) 60 AMBIENT TEMPERATURE. ( C) 1.0 0.1 TJ=125 0C 10 1 TJ=25 0C 0 .01 .6 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE .7 .8 .9 1.0 1.1 1.2 1.3 0.1 0 1.4 INSTANTANEOUS FORWARD VOLTAGE. (V) 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 593 - 140 140 150