- 592 -
.460(11.68)
.420(10.6)
.160(4.1)
.140(3.6)
.153(3.9)
.146(3.7)
.050(1.27)
.5
MIN
(12.7)
SPACING
AC
.035(0.9)
.028(0.7)
.600(15.24)
.560(14.22)
KBP201 THRU KBP207
Single Phase 2.0 AMPS. Silicon Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
2.0 Amperes
Features
UL Recognized File # E-96005
Glass passivated junction
Ideal for printed circuit board
Reliable low cost construction technique
results in inexpensive product
High temperature soldering guaranteed:
260 ℃ / 10 seconds at 5 lbs. ( 2.3 Kg )
tension
Small size, simple installation
Leads solderable per MIL-STD-202,
Method 208
KBP
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol KBP
201 KBP
202 KBP
203 KBP
204 KBP
205 KBP
206 KBP
207 Units
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Avera
g
e Forward Rectified Current
@TA = 50℃ I(AV) 2.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method ) IFSM 60 A
Maximum Instantaneous Forward Voltage
@ 2.0A VF 1.2 V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=125℃ IR 10
500 uA
uA
Typical Thermal Resistance (Note)
R
θ
JA
R
θ
JL 25
8 ℃/W
Operating Temperature Range TJ -55 to +125 ℃
Storage Temperature Range TSTG -55 to +150 ℃
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.
With 0.47 x 0.47” (12 x 12mm) Copper Pads.
- 593 -
RATINGS AND CHARACTERISTIC CURVES (KBP201 THRU KBP207)
FIG.4- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
INSTANTANEOUS REVERSE CURRENT.( A)
020 40 60 80 100 120 140
0.1
1
10
100
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
TJ=125 C
0
TJ=25 C
0
FIG.1- MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT PER BRIDGE ELEMENT
PEAK FORWARD SURGE CURRENT. (A)
10
246
140 6020 100
10
0
20
30
50
60
40
NUMBER OF CYCLES AT 60Hz
FIG.2- MAXIMUM FORWARD CURRENT DERATING
CURVE
AVERAGE FORWARD CURRENT. (A)
20 40 60 80 100 120 140 150
0
2.0
1.5
1.0
0.5
AMBIENT TEMPERATURE. ( C)
o
FIG.3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER BRIDGE ELEMENT
INSTANTANEOUS FORWARD CURRENT. (A)
.6 .7 .9.8 1.0 1.31.1 1.2 1.4
.01
0.1
1.0
10.0
INSTANTANEOUS FORWARD VOLTAGE. (V)
Tj=25 C
PULSE WIDTH-300 S
1% DUTY CYCLE
0
