©2009 Fairchild Semiconductor Corporation ISL9V5036S3S / ISl9V5036P3 / ISL9V5036S3 Rev. C4, November 2009
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Device Maximum Ratings TA = 25°C unless otherwise noted
Symbol Parameter Ratings Units
BVCER Collector to Emitter Breakdown Voltage (IC = 1 mA) 390 V
BVECS Emitter to Collector V oltage - Reverse Battery Condition (IC = 10 mA) 24 V
ESCIS25 At Starting TJ = 25°C, ISCIS = 38.5A, L = 670 µHy 500 mJ
ESCIS150 At Starting TJ = 150°C, ISCIS = 30A, L = 670 µHy 300 mJ
IC25 Collector Current Continuous, At TC = 25°C, See Fig 9 46 A
IC110 Collector Current Continuous, At TC = 110°C, See Fig 9 31 A
VGEM Gate to Emitter Volt age Continuous ±10 V
PDPower Dissipation Total TC = 25°C 250 W
Power Dissipation Derating TC > 25°C 1.67 W/°C
TJOperating Junction Temperature Range -40 to 175 °C
TSTG Storage Junction Temperature Range -40 to 175 °C
TLMax Lead Tem p for Soldering (Leads at 1.6mm from Case for 10s) 300 °C
Tpkg Max Lead Temp for Soldering (Package Body for 10s) 260 °C
ESD Electrostatic Discharge Voltage at 100pF, 15004kV
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
EcoSPARK 500mJ, 360V, N-Channel Ignition IGBT
General Description
The ISL9V5036S3S, ISL9V5036P3, and ISL9V5036S3 are the next
generation IGBTs that offer outstanding SCIS capability in the D²-
Pak (TO-263) and TO-220 plastic package. These de vices are
intended for use in automotive ignition circuits, specifically as coil
drivers. Internal diodes provide voltage clamping without the need
for external components.
devices can be custom made to specific clamp
voltages. Contact your nearest Fairchild sales office for more
information.
F ormerly De velopmental Type 49443
Applications
Automotive Ignition Coil Driver Circuits
Coil-On Plug Applications
Features
Industry Standard D2-Pak package
SCIS Energy = 500mJ at TJ = 25oC
Logic Level Gate Drive
Package
COLLECTOR
(FLANGE)
E
G
GATE
COLLECTOR
EMITTER
R
2
R
1
Symbol
D²-Pak
JEDEC TO-263AB JEDEC TO-220AB
EG
C
COLLECTOR
(FLANGE)
JEDEC TO-262AA
EG
C
November 2009
Qualified to AEC Q101
RoHS Compliant
®
EcoSPARK®
©2009 Fairchild Semiconductor Corporation ISL9V5036S3S / ISL9V5036 P3 / ISL9V5036S3 Rev. C4, November 2009
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Package Marking and Ordering Information
Electrical Characteristics TA = 25°C unless otherwise noted
Off State Characteristics
On State Characteristics
Dynamic Characteristics
Switching Characteristics
Thermal Ch ara cteris t ics
Device Marking Device Pac kage Reel Size Tape Width Quantity
V5036S ISL9V5036S3ST TO-263AB 330mm 24mm 800
V5036P ISL9V5036P3 TO-220AA Tube N/A 50
V5036S ISL9V5036S3 TO-262AA Tube N/A 50
V5036S ISL9V5036S3S TO-263AB Tube N/A 50
Symbol P arameter Test Conditions Min Typ Max Units
BVCER Collector to Emitter Breakdown Voltage IC = 2mA, VGE = 0,
RG = 1KΩ, See Fig. 15
TJ = -40 to 150°C
330 360 390 V
BVCES Collector to Emitter Breakdown Voltage IC = 10mA, VGE = 0,
RG = 0, See Fig. 15
TJ = -40 to 150°C
360 390 420 V
BVECS Emitter to Collector Breakdown Voltage IC = -75mA, VGE = 0V,
TC = 25°C 30 - - V
BVGES Gate to Emitter Breakdown Voltage IGES = ± 2mA ±12 ±14 - V
ICER Collector to Emitter Leakage Current VCER = 250V,
RG = 1KΩ,
See Fig. 11
TC = 25°C- - 25 µA
TC = 150°C- - 1 mA
IECS Emitter to Collector Leakage Current VEC = 24V, See
Fig. 11 TC = 25°C- - 1 mA
TC = 150°C- - 40 mA
R1Series Gate Resistance - 75 -
R2Gate to Emitter Resistance 10K - 30K
VCE(SAT) Collector to Emitter Saturation Voltage IC = 10A,
VGE = 4.0V TC = 25°C,
See Fig. 4 - 1.17 1.60 V
VCE(SAT) Collector to Emitter Saturation Voltage IC = 15A,
VGE = 4.5V TC = 150°C - 1.50 1.80 V
QG(ON) Gate Charge IC = 10A, VCE = 12V,
VGE = 5V, See Fig. 14 -32-nC
VGE(TH) Gate to Emitter Threshold Voltage IC = 1.0mA,
VCE = VGE,
See Fig. 10
TC = 25°C1.3 - 2.2 V
TC = 150°C0.75- 1.8V
VGEP Gate to Emitter Plateau Volt age IC = 10A, VCE = 12V - 3.0 - V
td(ON)R Current Turn-On Delay Time-Resistive VCE = 14V, RL = 1Ω,
VGE = 5V, RG = 1K
TJ = 25°C, See Fig. 12
-0.74µs
trR Current Rise Time-Resistive - 2.1 7 µs
td(OFF)L Current Turn-Off Delay Time-Inductive VCE = 300V, L = 2mH,
VGE = 5V, RG = 1K
TJ = 25°C, See Fig. 12
- 10.8 15 µs
tfL Current Fall Time-Inductive - 2.8 15 µs
SCIS Self Clamped Inductive Switching TJ = 25°C, L = 670 µH,
RG = 1KΩ, VGE = 5V, See
Fig. 1 & 2
- - 500 mJ
RθJC Ther mal Resistance Junction-Case TO-263, TO-220, TO-262 - - 0.6 °C/W
©2009 Fairchild Semiconductor Corporation ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S 3 Rev. C4, November 2009
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Typical Characteristics
Figure 1. Self Clamped Inductive Switching
Current vs Time in Clamp Figure 2. Self Clamped Inductive Sw itching
Current vs Inductance
Figure 3. Collector to Emitter On-State Voltage vs
Junction Tem peratu r e Figure 4.Colle ctor to Emitte r On-State Volta ge vs
Junction Temperature
Figure 5. Collector Current vs Collector to Emitter
On-State Voltage Figure 6. Collector Current vs Collector to Emitter
On-State Voltage
tCLP, TIME IN CLAMP (µS)
ISCIS, INDUCTIVE SWITCHING CURRENT (A)
35
30
10
45
20
25
0350300025010050 150 200
TJ = 25°C
RG = 1K, VGE = 5V,Vdd = 14V
5
15
40
SCIS Curves valid for Vclamp Voltages of <390V
TJ = 150°C
ISCIS, INDUCTIVE SWITCHING CURRENT (A)
0102468
L, INDUCTANCE (mHy)
TJ = 150°C
RG = 1K, VGE = 5V,Vdd = 14V
TJ = 25°C
SCIS Curves valid for Vclamp Voltages of <390V
35
30
10
45
20
25
0
5
15
40
1.10
1.05
1.00
0.95
0.90
25-25 17512575-50 0 50 100 150
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
VGE = 4.0V
VGE = 3.7V
VGE = 5.0V
VGE = 8.0V
ICE = 6A
VGE = 4.5V
0.85 25-25 17512575-50 0 50 100 150
1.25
1.20
1.15
1.10
1.05
VCE, COLLECTOR TO EMITT ER VOLTAGE (V)
1.00
TJ, JUNCTION TEMPERATURE (°C)
ICE = 10A
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
ICE, COLLECTOR TO EMITTER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
20
40
02.01.0 3.0 4.0
50
30
10
0
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
TJ = - 40°C
ICE, COLLECTOR TO EM ITT ER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
40
0
50
30
02.01.0 3.0 4.0
20
10
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
TJ = 25°C
©2009 Fairchild Semiconductor Corporation ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S 3 Rev. C4, November 2009
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Figure 7. Collector to Emitter On-State Voltage vs
Collector Current Figure 8. Transfer Characteristics
Figure 9. DC Collector Current vs Case
Temperature Figure 10. Threshold Voltage vs Junction
Temperature
Figure 11. Leakage Current vs Junction
Temperature Figure 12. Switching Time vs Junction
Temperature
Typical Characteristics (Continued)
ICE, COLLECTOR TO EM ITT ER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
0
50
40
02.01.0 3.0 4.0
30
TJ = 175°C
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
20
10
ICE, COLLECTOR TO EMITTER CURRENT (A)
VGE, GATE TO EMITTER VOLTAGE (V)
2.01.0 3.0 4.0
50
40
30
02.51.5 3.5 4.5
PULSE DURATION = 250µs
DUTY CYCLE < 0.5%, VCE = 5V
TJ = 25°C
TJ = 175°C
TJ = -40°C
20
10
ICE, DC COLLECTOR CURRENT (A)
TC, CASE TEMPERATURE (°C)
50
25 1751257550 100 150
40
30
20
10
0
VGE = 4.0V
17550 100
2.0
1.8
1.6
1.4
1.0
VTH, THRESHOLD VOLTAGE (V)
TJ, JUNCTION TEMPERATURE (°C)
1500 125
1.2
VCE = VGE
ICE = 1mA
-50 7525-25
LEAKAGE CURRENT (µ A)
TJ, JUNCTION TEMPERATURE (°C)
1000
10
0.1
10000
100
1
25-25 17512575-50 0 50 100 150
VECS = 24V
VCES = 300V
VCES = 250V
25 1751257550 100 150
TJ, JUNCTION TEMPERATURE (°C)
SWITCHING TIME (µS)
20
16
12
6
2
ICE = 6.5A, VGE = 5V, RG = 1KResistive tOFF
Inductive tOFF
Resistive tON
10
14
18
8
4
©2009 Fairchild Semiconductor Corporation ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S 3 Rev. C4, November 2009
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Figure 13. Capacitance vs Collector to Emitter
Voltage Figure 14. Gate Charge
Figure 15. Breakdown Voltage vs Series Gate Resistance
Figure 16. IGBT Normalized Transient Therm al Impe danc e, Junc tion to Case
Typical Characteristics (Continued)
C, CAPACITANCE (pF)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
3000
1000
500
1500
0105 152025
0
CIES
FREQUENCY = 1 MHz
COES
CRES
2500
2000
QG, GATE CHARGE (nC)
VGE, GATE TO EMITTER VOLTAGE (V)
0
2
4
8
0 1020304050
3
5
7
6
1
IG(REF) = 1mA, RL = 0.6Ω, TJ = 25°C
VCE = 6V
VCE = 12V
BVCER, BREAKDOWN VOLTAGE (V)
RG, SERIES GATE RESI STANCE (k)
360
352
348
356
10 20001000 3000
344
100
354
350
358
346
TJ = - 40°C
TJ = 25°C
TJ = 175°C
ICER = 10mA
342
340
ZthJC, NORMALIZED THERMAL RESPONSE
T1, RECTANGULAR PULSE DURATION (s)
100
10-2
10-1
10-2
10-3
10-4
10-5 10-1
10-6
t
1
t
2
P
D
DUTY FACTOR, D = t
1
/ t
2
PEAK T
J
= (P
D
X Z
θ
JC
X R
θ
JC
) + T
C
0.5
0.2
0.1
0.05
0.02
0.01
SINGLE PULSE
10-3
10-4
©2009 Fairchild Semiconductor Corporation IS L9V 5036 S3S / ISL9V5036 P3 / ISL9V5036S 3 Rev. C4, November 2009
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Test Circuits and Waveforms
Figure 17. Inductive Switching Test Circuit Figure 18. tON and tOFF Switching Test Circuit
Figure 19. Energy Test Circuit Figure 20. Energy Waveforms
RG
G
C
E
VCE
L
PULSE
GEN DUT RG = 1K+
-
VCE
DUT
5V
C
G
E
LOAD
R
or
L
tP
VGS
0.01
L
IAS
+
-
VCE
VDD
RG
DUT
VARY tP TO OBTAIN
REQUIRED PEAK IAS
0V
VDD
VCE
BVCES
tP
IAS
tAV
0
©2009 Fairchild Semiconductor Corporation IS L9V 5036 S3S / ISL9V5036 P3 / ISL9V5036S 3 Rev. C4, November 2009
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
SPICE Thermal Model
REV 1 May 20 02
ISL9V5036S3S / ISL9V3536P3 / ISL9V5036S3
CTHERM1 th 6 4.0e2
CTHERM2 6 5 3.6e-3
CTHERM3 5 4 4.9e-2
CTHERM4 4 3 3.2e-1
CTHERM5 3 2 3.0e-1
CTHERM6 2 tl 1.6e-2
RTHERM1 th 6 1.0e-2
RTHERM2 6 5 1.4e-1
RTHERM3 5 4 1.0e-1
RTHERM4 4 3 9.0e-2
RTHERM5 3 2 9.4e-2
RTHERM6 2 tl 1.9e-2
SABER Thermal Model
SABER thermal model
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
template thermal_model th tl
therma l _c th, tl
{
ctherm.ctherm1 th 6 = 4.0e2
ctherm.ctherm2 6 5 = 3.6e-3
ctherm.ctherm3 5 4 = 4.9e-2
ctherm.ctherm4 4 3 = 3.2e-1
ctherm.ctherm5 3 2 = 3.0e-1
ctherm.cthe rm6 2 tl = 1.6e-2
rtherm. rtherm1 th 6 = 1.0e-2
rtherm. rtherm2 6 5 = 1.4e-1
rtherm. rtherm3 5 4 = 1.0e-1
rtherm. rtherm4 4 3 = 9.0e-2
rtherm. rtherm5 3 2 = 9.4e-2
rtherm. rtherm6 2 tl = 1.9e-2
}
RTHERM4
RTHERM6
RTHERM5
RTHERM3
RTHERM2
RTHERM1
CTHERM4
CTHERM6
CTHERM5
CTHERM3
CTHERM2
CTHERM1
tl
2
3
4
5
6
th JUNCTION
CASE
© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower
Auto-SPM
Build it Now
CorePLUS
CorePOWER
CROSSVOLT
CTL™
Current Transfer Logic™
EcoSPARK®
EfficientMax™
EZSW ITCH™*
™*
DEUXPEED™
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore
FETBench
FlashWriter®*
FPS
F-PFS
FRFET®
Global Power ResourceSM
Green FPS
Green FPS e-Series
Gmax
GTO
IntelliMAX
ISOPLANAR
MegaBuck™
MICROCOUPLER
MicroFET
MicroPak
MillerDrive™
MotionM ax
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM
PowerTrench®
PowerXS™
Programmable Active Droop
QFET®
QS
Quiet Series
RapidConfigure
Saving our world, 1mW/W/kW at a time™
SignalWise™
SmartMax™
SMART START
SPM®
STEALTH™
SuperFET
SuperSOT-3
SuperSOT-6
SuperSOT-8
SupreMOS™
SyncFET™
Sync-Lock™
®*
The Power Franchise®
TinyBoost
TinyBuck
TinyCalc
TinyLogic®
TINYOPTO
TinyPower
TinyPWM
TinyWire
TriFault Detect
TRUECURRENT*
μSerDes
UHC®
Ultra FRFET
UniFET
VCX
VisualMax
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHI LD SEM ICONDUCTOR RESERVES THE RIG HT TO MAKE CHANGES WITHOUT F URTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPRO VE
RELIABI LITY , FUNCTION, O R DESIGN. FAI RCHILD DOES NOT ASSUME ANY L IABIL ITY ARI SING OUT OF THE APPL ICATION O R USE OF ANY PRODUCT OR
CIRCUI T DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER I TS PATENT RIGHTS, NOR THE RI GHTS OF OTHERS. THESE
SPECIFI CATIONS DO NO T EXPAND THE TERMS OF FAIRCHI LD’S WORLDWIDE TERM S AND CONDITIONS, SPECIFI CALLY THE WARRANTY THEREI N,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHI LD’S PRODUCTS ARE NOT AUTHORIZED F OR USE AS CRITI CAL COM PONENTS IN LI FE SUPPORT DEVICES OR SY STEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAI RCHI LD SEM ICONDUCTOR CO RPORATION.
As used herein:
1. Life support devices or systems are devices or systems whi ch, (a) are
intended for surgical im plant i nto the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, w ww.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delay s. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all w arranties and will appropriately address any warranty issues th at may arise. Fa irchild will n ot provide
any w arranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buy ing direct or from authorized distributors.
PRODUCT STA TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only. Rev. I43
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Fairchild Semiconductor:
ISL9V5036S3ST