T93 Vishay Sfernice 3/8" Square Multi-Turn Cermet Trimmers FEATURES * * * * * The T93 is a small size trimmer - 3/8" x 3/8" x 3/16" answering PC board mounting requirements. Five versions are available which differ by the position of the control screw in relation to the PC board plane and by the spacing of the terminals. Excellent operational stability is provided by the use of a cermet element. Industrial Grade 0.5 W at 70 C Tests according to CECC 41 000 Contact resistance variation < 1 % Lead (Pb)-free and RoHS compliant RoHS COMPLIANT DIMENSIONS in millimeters ( 0.5 mm) T93XA 9.8 max Terminal Spacing on a 2.54 PCB 51 5 max 2.3 0.2* a b c 2.54 2.54 a b c 9.7 max o 0.5 1.3 0.5 o 2.2 slot 0.6 x 0.6 1.2 0.2 7.9 0.2 T93XB 9.8 max 0.6 0.2* 51 2.54 5 max a b c 2.54* 2.54* a b c 9.7 max o 0.5 1.3 0.5 o 2.2 1.2 0.2 slot 0.6 x 0.6 7.9 0.2 T93YA 1.3 2.3 0.2* 9.8 max 1.2 0.1 51 1.6 0.1 o 2.2 a b c 2.54* 2.54* 9.7 max o 0.5 a b c slot 0.6 x 0.6 0.5 T93YB 0.6 0.2* 1.3 9.8 max 5 max 1.2 0.1 51 2.54 o 2.2 2.54* 2.54* a b c 1.6 0.1 9.7 max o 0.5 slot 0.6 x 0.6 5 max 0.5 5.2 max 4.8 0.2* T93Z 51 2.54* slot 0.6 x 0.6 a b c c b a 9.7 max 2.54* 2.54* o 0.5 o 2.2 c b a Base level 1.3 0.5 1.3 0.1 9.7 max 1.2 0.1 Note * to be measured at base level Document Number: 51026 Revision: 23-Nov-07 For technical questions, contact: sfer@vishay.com www.vishay.com 73 T93 Vishay Sfernice 3/8" Square Multi-Turn Cermet Trimmers ELECTRICAL SPECIFICATIONS Resistive Element CERMET Electrical Travel 21 turns 2 Resistance Range 10 to 2.2 M Standard Series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 standard 10 % on request 5% Tolerance linear 0.5 W at + 70 C logarithmic not applicable 0.5 Power Rating a c (1) (3) b (2) POWER IN W CIRCUIT DIAGRAM cw 0 0 50 25 70 100 125 155 AMBIENT TEMPERATURE IN C Temperature Coefficient see Standard Resistance Element Table Limiting Element Voltage (Linear Law) 250 V 2 % Rn or 2 Contact Resistance Variation End Resistance (Typical) 1 Dielectric Strength (RMS) 1000 V Insulation Resistance (500 VDC) 106 M MECHANICAL SPECIFICATIONS Mechanical Travel 23 turns 5 Operating Torque (Max. Ncm) 1.5 End Stop Torque Clutch action Net Weight Approx. 0.82 g Wiper (Actual Travel) Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing www.vishay.com 74 - 55 C to + 155 C 55/125/56 Fully sealed - Container IP67 For technical questions, contact: sfer@vishay.com Document Number: 51026 Revision: 23-Nov-07 T93 3/8" Square Multi-Turn Cermet Trimmers Vishay Sfernice STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. POWER AT 70 C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER TYPICAL TCR - 55 C + 125 C W V mA ppm/C 10 22 47 100 220 470 1K 2.2K 4.7K 10K 22K 47K 100K 220K 470K 1M 2.2M 0.5 2.2 3.3 4.8 7 10.5 15.3 22.4 33.2 48.5 70.7 105 153 224 250 250 250 250 224 150 103 70 47 32 22 15 10 7 4.8 3.2 2.2 1.1 0.53 0.25 0.11 100 0.5 0.28 0.13 0.06 0.028 MARKING * VISHAY trademark * Model * Style * Ohmic value (in , k, M) * Tolerance (in %) * Manufacturing date * Marking of terminal 3 PACKAGING * In magazine pack by 50 pieces (tube) code TU50 PERFORMANCES TESTS Load Life Climatic Sequence Long Term Damp Heat Rapid Temperature Change Shock Vibration Rotational Life Document Number: 51026 Revision: 23-Nov-07 TYPICAL VALUES AND DRIFTS CONDITIONS RT/RT (%) R1-2/R1-2 (%) 1000 h at rated power 90'/30' - ambient temp. 70 C 1% Contact res. variation: < 1 % Rn 2% Phase A dry heat 125 C - 30 % Pr Phase B damp heat Phase C cold - 55 C Phase D damp heat 5 cycles 0.5 % 1% 56 days 40 C, 93 % RH 0.5 % Dielectric strength: 1000 VRMS Insulation resistance: > 104 M 1% 5 cycles - 55 C at + 125 C 0.5 % V1-2/V1-3 1 % 50 g at 11 ms 3 successive shocks in 3 directions 0.1 % 0.2 % 10 to 55 Hz 0.75 mm or 10 g during 6 h 0.1 % V1-2/V1-3 0.2 % 200 cycles 4% Contact res. variation: < 1 % Rn - For technical questions, contact: sfer@vishay.com www.vishay.com 75 T93 3/8" Square Multi-Turn Cermet Trimmers Vishay Sfernice SAP ORDERING INFORMATION (Part Number 15 digits) T MODEL 9 3 X A 2 2 4 K T 2 0 STYLE OHMIC VALUE TOLERANCE PACKAGING XA XB YA YB Z From 10 to 2.2 M 224 = 220 k K = 10 % on request J = 5 % T20 = Tube 50 pieces SPECIAL NUMBER (if applicable) Given by VISHAY for custom design PART NUMBER DESCRIPTION (for information only) T93 XA 220K 10 % MODEL VERSION VALUE TOLERANCE www.vishay.com 76 SPECIAL For technical questions, contact: sfer@vishay.com TU50 e3 PACKAGING LEAD (Pb)-FREE Document Number: 51026 Revision: 23-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1