TLP281,TLP281-4 TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR TLP281,TLP281-4 PROGRAMMABLE CONTROLLERS AC/DC-INPUT MODULE Unit in mm PC CARD MODEM(PCMCIA) TLP281 and TLP281-4 is a very small and thin coupler,suitable for surface mount assembly in applications such as PCMCIA Fax modem,programmable controllers. TLP281 and TLP281-4 consist of photo transistor,optically coupled to a gallium arsenide infrared emitting diode. Collector-Emitter Voltage : 80 V (MIN) Current Transfer Ratio Rank GB : 50% (MIN) : 100% (MIN) Isolation Voltage : 2500 Vrms (MIN) UL Recognized : UL1577 , File No. E67349 BSI Approved : BS EN 60065: 1994, : BS EN 41003: 1997 Certificate No. 8143, 8144 TOSHIBA Weight: 0.05 g Unit in mm PIN CONFIGURATION(Top view) TLP281 TLP281-4 1 4 1 16 2 3 2 15 3 14 4 13 5 12 6 11 7 10 8 9 1:ANODE 2:CATHODE 3:EMITTER 4:COLLECTOR TOSHIBA Weight: 0.19 g 1,3,5,7 :ANODE 2,4,6,8 :CATHODE 9,11,13,15 :EMITTER 10,12,14,16 :COLLECTOR 1 2004-01-16 TLP281,TLP281-4 TYPE ClassiFication(*1) Blank TLP281 TLP281-4 Current Transfer Ration (%) (IC / IF) IF = 5 mA, VCE = 5 V, Ta = 25 Min Max Marking of Classification 50 600 Blank ,Y ,YE,G,G ,GR,B,BL,GB Rank Y 50 150 YE Rank GR 100 300 GR Rank BL 200 600 BL Rank GB 100 600 GB Rank YH 75 150 Y Rank GRL 100 200 G Rank GRH 150 300 G Rank BLL 200 400 B Blank 50 600 Blank , GB Rank GB 100 600 GB *1: Ex. rank GB: TLP281 (GB) (Note): Application type name for certification test, please use standard product type name, i.e. TLP281 (GB): TLP281-1 , TLP281-4 (GB): TLP281-4 2 2004-01-16 TLP281,TLP281-4 MAXIMUM RATINGS (Ta = 25) CHARACTERISTIC SYMBOL Forward Current LED TLP281-4 IF Forward Current Derating DETECTOR RATING TLP281 UNIT 50 IF /C -0.7 (Ta53C) mA -0.5 (Ta25C) mA /C Pulse Forward Current IFP 1 A Reverse Voltage VR 5 V Junction Temperature Tj 125 C Collector-Emitter Voltage VCEO 80 V Emitter-Collector Voltage VECO 7 V Collector Current IC 50 mA Collector Power Dissipation (1 Circuit) PC 150 100 mW PC /C -1.5 -1.0 mW /C Collector Power Dissipation Derating(Ta25C) (1 Circuit) Junction Temperature Tj 125 C Operating Temperature Range Topr -55~100 C Storage Temperature Range Tstg -55~125 C Lead Soldering Temperature Tsol 260 (10s) C Total Package Power Dissipation (1 Circuit) Total Package Power Dissipation Derating (Ta25C) (1 Circuit) Isolation Voltage (Note1) PT 200 170 mW PT /C -2.0 -1.7 mW /C BVS 2500(AC,1min,R.H.60%) Vrms (Note1)Device considered a two terminal device : LED side pins shorted together and DETECTOR side pins shorted together. INDIVIDUAL ELECTRICAL CHARACTERISTICS (Ta = 25) LED CHARACTERISTIC SYMBOL MIN. TYP. MAX. UNIT Forward Voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse Current IR VR = 5 V -- -- 10 A Capacitance CT V = 0, f = 1 MHz -- 30 -- pF V(BR) CEO IC = 0.5 mA 80 -- -- V V(BR) ECO IE = 0.1 mA 7 -- -- V -- 0.01 (2) 0.1 (10) A -- 2 (4) 50 (50) A -- 10 -- pF Collector-Emitter Breakdown Voltage Emitter-Collector DETECTOR TEST CONDITION Breakdown Voltage Collector Dark Current Capacitance (Collector to Emitter) (Note2) ICEO CCE VCE = 48 V, Ambient Light Below (100 x) VCE = 48 V, Ta = 85C Ambient Light Below (100 x) V = 0, f = 1 MHz (Note 2) Because of the construction,leak current might be increased by ambient light. Please use photocoupler with less ambient light. 3 2004-01-16 TLP281,TLP281-4 COUPLED ELECTRICAL CHARACTERISTICS (Ta = 25) CHARACTERISTIC SYMBOL Current Transfer Ratio Saturated CTR Collector-Emitter Saturation Voltage IC / IF IC / IF (sat) TEST CONDITION MIN. TYP. MAX. 50 -- 600 Rank GB 100 -- 600 -- 60 -- Rank GB 30 -- -- -- -- 0.4 -- 0.2 -- -- -- 0.4 -- -- 10 A MIN. TYP. MAX. UNIT -- 0.8 -- pF -- IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 0.4 V IC = 2.4 mA, IF = 8 mA VCE (sat) IC = 0.2 mA, IF = 1 mA Rank GB Off-State Collector Current IC (off) VF = 0.7 V, VCE = 48 V UNIT % % V ISOLATION CHARACTERISTICS (Ta = 25) CHARACTERISTIC SYMBOL Capacitance (Input to Output) CS Isolation Resistance RS TEST CONDITION VS = 0 V, f = 1 MHz VS = 500 V, R.H.60% AC , 1 minute Isolation Voltage BVS 5x10 10 14 10 2500 -- -- AC , 1 second,in OIL -- 5000 -- DC , 1 minute, in OIL -- 5000 -- Vdc MIN. TYP. MAX. UNIT -- 2 -- -- 3 -- -- 3 -- -- 3 -- -- 2 -- -- 25 -- 40 -- Vrms SWITCHING CHARACTERISTICS (Ta = 25) CHARACTERISTIC SYMBOL Rise Time tr Fall Time tf Turn-On Time ton Turn-Off Time toff Turn-On Time tON Storage Time Turn-Off Time ts TEST CONDITION VCC = 10 V, IC = 2 mA RL = 100 RL = 1.9 k (Fig.1) VCC = 5 V, IF = 16 mA tOFF -- s s (Fig.1)SWITCHING TIME TEST CIRCUIT 4 2004-01-16 TLP281,TLP281-4 TLP281 TLP281-4 TLP281 TLP281-4 5 2004-01-16 TLP281,TLP281-4 6 2004-01-16 TLP281,TLP281-4 7 2004-01-16 TLP281,TLP281-4 RESTRICTIONS ON PRODUCT USE 030619EBC * The information contained herein is subject to change without notice. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. 8 2004-01-16