C503B-ACN-VX0Y0342-0WH - CREE

Features

· Thick Film

· Chip Resistor Arrays

· RoHS Compliant

· Sulphur resistant version available

(Tested to ASTM-B809)

· Range extended to include 0201 size resistors

Features

· Reliable monolithic construction

· Nickel barrier terminations

· Top side marking for easy identiﬁcation

· Concave or convex termination styles

· Square or scalloped edges available

Applications

· Pull up / pull down resistors for digital IC’s

· Series termination on high speed data busses

· Current limit for LED displays

· Available as an 8 bit R/2R Ladder Network

Beneﬁts

· Saves board space over equivalent

rated chip resistors

· Eliminates up to seven pick & place operations

· Single component reliability

· Leadless chip, reduced inductance

· Mounts close to active devices

BCN Series

BCN

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

Model (Width) # of Resistors Circuit Package

Size

Chip

Array

Edge Finish / Termination

Scalloped

Convex

Square

Convex

Square

Concave

Model BCN 06 2 (0.6mm) 2 Resistors Isolated 0302 0201 •

Model BCN 06 4 (0.6mm) 4 Resistors Isolated 0502 0201 •

Model BCN 2D (1.6mm) 2 Resistors Isolated 0606 0603 •

Model BCN 10 (1.0mm) 4 Resistors Isolated 0804 0402 •

Model BCN 16 4ABI (1.6mm) 4 Resistors Isolated 1206 0603 •

Model BCN 16 4A/AB (1.6mm) 4 Resistors Isolated 1206 0603 • •

Model BCN 16 8RB/8SB (1.6mm) 8 Resistors Bussed 1206 0603 •

Model BCN 21 (2.1mm) 8 Resistors Bussed 1608 0804 •

Model BCN 4D (3.1mm) 4 Resistors Isolated 2112 1206 •

Model BCN 4DBI (3.1mm) 4 Resistors Isolated 2112 1206 •

Model BCN 31 8RB/8SB (3.1mm) 8 Resistors Bussed 2512 1206 •

Model BCN 31 8RBI/8SBI (3.1mm) 8 Resistors Bussed 2512 1206 •

Jumper Chip Array 4/8 Resistors Isolated/Bussed All All • • •

Model Styles

BCN Series

BCN

Electrical

Environmental

Construction

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

Standard Resistance Range,

Ohms

BCN06 2,BCN06 4, BCN2D, BCN4D, BCN10, BCN16 4:

BCN 16 8R / 8S:

BCN 31 8R / 8S:

BCN 21:

10 to 1 Megohm

100 to 1 Megohm

22 to 1 Megohm

68 to 220K

Standard Resistance Tolerance

±5% (J Tol.)

Optional: ±1% (F Tol.), BCN 4D, BCN 16 4, BCN31 8RB / 8SB Only

±2% (G Tol.), BCN 16 4, BCN31 8RB / 8SB Only

Operating Voltage, Maximum

BCN 4D:

BCN 2D, BCN 16 4, BCN 31 8R / 8S:

BCN 10, BCN 16 8R / 8S, BCN 21:

BCN 06 2, BCN 06 4:

75Vdc or √pr

50Vdc or √pr

25Vdc or √pr

12.5Vdc or √pr

Power Rating, watts at 70°C

BCN 2D:

BCN 4D:

BCN 06 2:

BCN 06 4:

BCN 10, BCN 164:

BCN 16 8R / 8S:

BCN 21, BCN 31 8R / 8S:

63mW per Resistor / 125mW per Package

125mW per Resistor / 500mW per Package

31mW per Resistor / 63mW per Package

31mW per Resistor / 125mW per Package

63mW per Resistor / 250mW per Package

32mW per Resistor / 250mW per Package

63mW per Resistor / 500mW per Package

Operating Temperature Range -55°C to +125°C

Temperature Coefﬁcient of

Resistance

BCN 2D:

BCN 06 2, BCN 06 4, BCN 4D, BCN 16 8R / 8S, BCN 21, BCN 31:

BCN 10, BCN 16 4:

±300ppm/°C

±200ppm/°C

Moisture Resistance 1,000 hours @ +40°C, 95% R.H. (3.0% +0.1Ω ΔR)

High Temperature Operation 1,000 hours @ 70°C (3.0% +0.1Ω ΔR)

Short Time Overload 2.5 X rated voltage, 5 seconds (2.0% +0.1Ω ΔR)

Temperature Cycling -55°C to +125°C, 5 cycles (1.0% +0.1Ω ΔR)

Resistance to Solder Heat 260°C for 10 seconds (1.0% +0.1Ω ΔR)

Load Life 1,000 hours @ 70°C (3.0% +0.1Ω ΔR)

Glass Passivation

Conductor

Nickel Barrier

Resistor: Ruthenium Oxide

Alumina Substrate

100% Tin

BCN Series

BCN

Model BCN 06, BCN 2D, BCN 4D, BCN 10 & BCN 16 4

10 100 1K 10K 100K 1 Meg

12 120 1.2K 12K 120K Jumper

15 150 1.5K 15K 150K

18 180 1.8K 18K 180K

22 220 2.2K 22K 220K

27 270 2.7K 27K 270K

33 330 3.3K 33K 330K

39 390 3.9K 39K 390K

47 470 4.7K 47K 470K

56 560 5.6K 56K 560K

68 680 6.8K 68K 680K

82 820 8.2K 82K 820K

Model BCN 16 8R & BCN 16 8S

220 1K 10K 100K

330 4.7K 47K 1 Meg

Model BCN 21

68 330 4.7K 10K

220 1K 47K 100K

Model BCN 31 8R Model BCN 31 8S

220 2.2K 10K 100K

330 2.7K 22K 470K

1K 4.7K 47K 1 Meg

Electrical

Standard Resistance Values, Ohms

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

R1 R2 R3 R 4

R1 = R2….Rn

(n = 2, 4)

BCN062,

BCN 06 4, BCN 4D, BCN 10 & BCN 16 4

10 9 8 7 6

1 2 3 4 5

BCN 16 8R & BCN 31 8R

10 9 8 7 6

5 4 3 2 1

BCN 16 8S & BCN 31 8S BCN 21

BCN Series

BCN

L W H P B B1 C

BCN 2D .063 ±.006 .063 ±.006 .020 ±.006 .031 ±.004 .020 ±.004 -.010 ±.004

1.60 ±0.15 1.60 ±0.15 0.50 ±0.15 0.80 ±0.10 0.50 ±0.10 0.25 ±0.10

BCN 4D .210 ±.008 .122 ±.008 .022 ±.004 .050 ±.008 .030 ±.008 -.012 ±.008

5.34 ±0.20 3.10 ±0.20 0.55±0.10 1.27±0.20 0.80 ±0.20 0.30 ±0.20

BCN 10 .079 ±.008 .039 ±.006 .014 ±.004 .020 ±.004 .012 ±.006 .016±.006 .006±.002

2.00 ±0.20 1.00 ±0.15 0.36 ±0.10 0.50 ±0.10 0.30 ±0.15 0.40 ±0.15 0.15 ±0.05

BCN 16 4A/ AB .126 ±.004 .063 ±.004 .020 ±.004 .031 ±.002 .020 ±.004 -.009 ±.005

3.20 ±0.10 1.60 ±0.10 0.50 ±0.10 0.80 ±0.05 0.50 ±0.10 0.229 ±0.125

BCN 31 .252 ±.008 .122+.012,-.008 .022 ±.004 .050 ±.002 .032 ±.004 .041±.004 .012 ±.004

6.40 ±0.20 3.1 +0.3, -0.2 0.55 ±0.10 1.27 ±0.051 0.80 ±0.10 1.05±0.10 0.30 ±0.10

L W H P B C C1

BCN 4 DBI

BCN 16 4ABI

.210 ±.008 .122 ±.008 .022 ±.004 .050 ±.008 .030 ±.008 .012 ±.008 -

5.34 ±0.20 3.10 ±0.20 0.55 ±0.10 1.27 ±0.20 0.80 ±0.20 0.30 ±0.20

.126 ±.008 .063 ±.006 .024 ±.004 .031 ±.004 .016 ±.006 .012 ±.008 .012 ±.008

3.20 ±0.20 1.60 ±0.15 0.60 ±0.10 0.80 ±0.10 0.40 ±0.15 0.30 ±0.20 0.30 ±0.20

BCN 31

.252 ±.008 .122 ±.008 .024 ±.004 .050 .028 ±.008 .012 .012 +.008

-.004

6.40 ±0.20 3.10 ±0.20 0.60 ±0.10 1.27 0.70 ±0.20 0.30 0.30 +.02

-.01

Outline Dimensions (Inch /mm)

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

L (BCN 2D)

L (BCN 4D, BCN 16 4A)

B P

L (BCN 4D, BCN 10,BCN 16 4A)

L (BCN 31)

P B1

Exterior Termination (Convex)

Scalloped Edge: Models BCN 2D, 4D, 16 4A Square Edge: Models BCN 16 4AB, 31

Interior Termination (Concave)

Square Edge: Models BCN 4 DBI, 16 4ABI, 31

B P

H LC1

BCN Series

BCN

Outline Dimensions (Inch /mm)

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

L W T A B1 B2 C P

.126 ±.008 .063 ±.008 .020 ±.004 .012 ±.006 .014 ±.006 .020 ±.006 .008 .025

3.20 ±0.20 1.60 ±0.20 0.50 ±0.10 0.30 ±0.15 0.36 ±0.15 0.50 ±0.15 0.20 0.64

L W T A B C D

.157 ±.008 .083 ±.008 .021 ±.004 .020 ±.008 .010 ±.008 .020 ±.008 .012 ±.008

4.00 ±0.20 2.10 ±0.20 0.55 ±0.10 0.50 ±0.20 0.25 ±0.20 0.50 ±0.20 0.30 ±0.20

A1 B1 C1 D1 E P

.016 ±.008 .014 ±.008 .020 ±.008 .014 ±.008 .012 Typ.

0.30

.032 Typ.

0.80

0.40 ±0.20 0.40 ±0.20 0.50 ±0.20 0.35 ±0.20

Exterior Termination (Convex)

Square Edge: Models BCN 16 8R, 8S

P B2

Interior Termination (Concave)

Square Edge: Models BCN 21

L T

1D E 1A

BCN Series

BCN

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

Outline Dimensions

Solder Pad Layout

Unit : mm

Type A B C I P

BCN 06 2 0.80 0.90 - 0.30 0.50

BCN 06 4 1.40 0.90 0.20 0.30 0.40

Unit : mm

Type

Number

Resiostors

L W H A B C Y Weight (g)

(1000pcs)

BCN 06 2 2 0.80 ±.0.10 0.60 ±.0.10 0.35 ±.0.10 0.30 ±.0.10 0.50 ± 0.10 0.15 ±.0.10 0.15 ±.0.10 0.500

BCN 06 4 4 1.40 ± 0.10 0.60 ±.0.10 0.35 ±.0.10 0.20 ± 0.10 0.40 ± 0.10 0.10 ± 0.07 0.15 ±.0.05 0.833

Exterior Termination (Convex)

Square Edge: Models BCN 06 2, BCN 06 4

Exterior Termination (Convex)

Square Edge: Models BCN 06 2, BCN 06 4

BCN 06 2 BCN 06 4

BCN Series

BCN

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

Solder pad layout (Inch / mm)

Wave Solder Process Re-ﬂow Solder Process

P A B X X1 Y A B X X1 Y

BCN 16 8RB / 8SB .025 .048 .096 .012 .018 .024 .048 .096 .012 .018 .024

0.64 1.20 2.40 0.30 0.45 0.60 1.20 2.40 0.30 0.45 0.60

BCN 2D

BCN 4D/4DBI

BCN 16 4A,

AB, ABI

BCN 31 8R, 8S

Wave Solder Process Re-ﬂow Solder Process

P A B C X Y A B C X Y

.032 .039 .102 .014 .018 .032 .039 .079 .014 .018 .020

0.80 1.00 2.60 0.35 0.45 0.80 1.00 2.00 0.35 0.45 0.50

.050 .087 .169 .022 .028 .041 .087 .154 .022 .028 .034

1.27 2.20 4.30 0.57 0.70 1.05 2.20 3.90 0.57 0.70 0.85

.032 .039 .118 .014 .018 .039 .039 .118 .014 .018 .039

0.80 1.00 3.00 0.35 0.45 1.00 1.00 3.00 0.35 0.45 1.00

.050 .084 .148 .014 .036 .032 .084 .148 .014 .036 .032

1.27 2.10 3.70 0.35 0.90 0.80 2.10 3.70 0.35 0.90 0.80

BCN 2

BCN 16 4AB, 4ABI

BCN 31 Only

A B

BCN 16 8RB / 8SB

A P

X X1

BCN Series

BCN

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

Solder pad layout (Inch / mm)

BCN 10

P P1 A B X X1 Y L

.024 .020 .020 ±.004 .060 ±.004 010 ±.004 .018 ±.004 .020 ±.004 .085 ±.004

0.60 0.50 0.50 ±0.10 1.50 ±0.10 0.25 ±0.15 0.45 ±0.10 0.50 ±0.10 2.15 ±0.10

BCN 21

P A B C X Y W W1 W2 W3 L

.032 .060 ±.008 .120 ±.008 .016 ±.004 .016 ±.004 .030 ±.004 .012 ±.001 .015 ±.004 .030 ±.004 .030 ±.004 .196 ±.008

0.80 1.20 ±0.20 3.00 ±0.20 0.40 ±0.10 0.40 ±0.10 0.75 ±0.10 0.31 ±0.02 0.38 ±0.10 0.75 ±0.10 0.75 ±0.10 4.98 ±0.20

X X1

P1 B

A B

BCN 10

BCN 21

BCN Series

BCN

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

Ordering Information

BCN 4 D B I 102 J 7 S

Model Series Construction Option:

No code = Standard product

No. of Resistors:

BCN 2D = 2 Resistors on BCN4DxxxJ7

BCN 4D = 4 Resistors

Packaging Option:

Circuit Configuration: (See Table A)

D = Isolated Tolerance: ±5%

Resistance Code

Edge Option (B = Square Edge): Termination Code:

BCN 2D: Scalloped Edge Only - No Code Used I = Interior (Concave) Termination

BCN 4D: Scalloped Edge Only - No Code Used (Only available in BCN 4 DBI)

S = Sulphur resistant - only

BCN 16 4 A B I 102 J 7 S

Model Series Construction Option:

No code = Standard product

Width: S = Sulphur resistant - only

06 = 0.6mm

10 = 1.0mm

16 = 1.6mm Packaging Option:

21 = 2.1mm (See Table A)

31 = 3.1mm

Tolerance:

No. of Resistors:

BCN 06 2 = 2 Resistors G = ±2% (BCN 16 4, 31 8RB / 8SB Only)

BCN 10 / 06 4 / 16 4 = 4 Resistors J = ±5% (Standard)

BCN 16 8R / 16 8S = 8 Resistors (Use JP for Jumper Chip Array - BCN 16 4 / 31)

BCN 21 / 31 8R / 31 8S = 8 Resistors

Resistance Code:

Circuit Configuration: 3 digits for E4,E12,E24 Series, all Tol.

A = Isolated (BCN 06 / 10 / 16 4A) 4 digits for E96 Series, 1% Tol.

R = Bussed (Reversed) (BCN 16 8R / 31 8R)

S = Bussed (Standard) (BCN 21 / 16 8S / 31 8S) Termination Code:

I = Interior (Concave) Termination

Edge Option (B = Square Edge): No code used for exterior termination ( Standard)

Scalloped Edge - No Code Used (Standard) All interior termination requires ‘B’ for square edge

Square Edge Only - Use Code ‘B’ (BCN 16 4ABI / 31 8RBI / 31 8SBI)

F = ±1% (BCN 4D / 16 4 / 31 8RB / 31 8SB)

See ‘Model Styles’ for Available Options

7” or 13”

on BCN 104/164/168RB

BCN Series

BCN

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

01. 12

Packaging (Table A)

7” Reel Diameter 13” Reel Diameter

Paper Embossed Paper Embossed

BCN 2D 5K 20K

BCN 4D 4K 16K

BCN 06 2 10K

BCN 06 4 10K

BCN 10 10K 40K

BCN 16 4 5K 20K

BCN 16 8 5K 20K

BCN 21 4K 16K

BCN 31 4K 16K

Note: Tape & Reel dimensions per EIA-481.

Sulphur Resistant Arrays

· Special construction resists sulphide growth

· Withstands sulphur bearing fume

environment

· Tested to ASTM-B809 (“Flowers-of-Sulphur”)

· Suitable for industrial, automotive and

roadside uses

· RoHS compliant matt Tin ﬁnish terminations

Performance Data

Hydrogen Sulphide exposure:

· 1000 Hours, 3-5ppm H2S, 50°C, 92%RH

· 0.5% Max ΔR and no visual defects