A6259 8-Bit Addressable DMOS Power Driver Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no longer available. Date of status change: April 30, 2007 Recommended Substitutions: NOTE: For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative. Allegro MicroSystems, Inc. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or other rights of third parties which may result from its use. Data Sheet 26186.120 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER 20 POWER GROUND 2 19 CLEAR S 0 (LSB) 3 18 DATA OUT 0 4 17 OUT 7 OUT 1 5 16 OUT 6 OUT 2 6 15 OUT 5 OUT 3 7 14 OUT 4 S1 8 13 ENABLE LOGIC GROUND 9 12 S 2 (MSB) POWER GROUND 10 11 POWER GROUND VDD LATCHES LOGIC SUPPLY LATCHES 1 DECODER LOGIC POWER GROUND EN Dwg. PP-050-2 Note that the A6259KA (DIP) and the A6259KLW (SOIC) are electrically identical and share a common terminal number assignment. ABSOLUTE MAXIMUM RATINGS at TA = 25C Output Voltage, VO ............................ 50 V Output Drain Current, Continuous, IO ...................... 250 mA* Peak, IOM ............................. 750 mA* Peak, IOM ................................... 2.0 A Single-Pulse Avalanche Energy, EAS ............................................. 75 mJ Logic Supply Voltage, VDD .............. 7.0 V Input Voltage Range, VI ............................... -0.3 V to +7.0 V Package Power Dissipation, PD ....................................... See Graph Operating Temperature Range, TA ............................. -40C to +125C Storage Temperature Range, TS ............................. -55C to +150C *Each output, all outputs on. Pulse duration 100 s, duty cycle 2%. Caution: These CMOS devices have input static protection (Class 3) but are still susceptible to damage if exposed to extremely high static electrical charges. The A6259KA and A6259KLW combine a 3-to-8 line CMOS decoder and accompanying data latches, control circuitry, and DMOS outputs in a multi-functional power driver capable of storing single-line data in the addressable latches or use as a decoder or demuliplexer. Driver applications include relays, solenoids, and other medium-current or high-voltage peripheral power loads. The CMOS inputs and latches allow direct interfacing with microprocessor-based systems. Use with TTL may require appropriate pullup resistors to ensure an input logic high. Four modes of operation are selectable with the CLEAR and ENABLE inputs. The addressed DMOS output inverts the DATA input with all unaddressed outputs remaining in their previous states. All of the output drivers are disabled (the DMOS sink drivers turned off) with the CLEAR input low and the ENABLE input high. The A6259KA/KLW DMOS open-drain outputs are capable of sinking up to 750 mA. Similar devices with reduced rDS(on) are available as the A6A259. The A6259KA is furnished in a 20-pin dual in-line plastic package. The A6259KLW is furnished in a 20-lead wide-body, small-outline plastic package (SOIC) with gull-wing leads for surface-mount applications. Copper lead frames, reduced supply current requirements, and low on-state resistance allow both devices to sink 150 mA from all outputs continuously, to ambient temperatures over 85C. FEATURES 50 V Minimum Output Clamp Voltage 250 mA Output Current (all outputs simultaneously) 1.3 Typical rDS(on) Low Power Consumption Replacements for TPIC6259N and TPIC6259DW Always order by complete part number: Part Number Package A6259KA 20-pin DIP A6259KLW 20-lead SOIC RJA 55C/W 70C/W RJC 25C/W 17C/W 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS LOGIC SYMBOL 2.5 3 8 12 13 18 19 2.0 SU FF IX 1.5 SU FF IX 'A ', R J A = 'LW ', R J 1.0 A 55 C /W =7 0 C/ W 0.5 0 50 75 100 125 AMBIENT TEMPERATURE IN C 25 150 0 8M 0/7 2 G8 Z9 Z10 9,0D 10,0R 4 9,1D 10,1R 5 9,2D 10,2R 6 9,3D 10,3R 7 9,4D 10,4R 14 9,5D 10,5R 15 9,6D 10,6R 16 9,7D 10,7R 17 Dwg. FP-046 Dwg. GS-004A VDD OUT IN Dwg. EP-063 Dwg. EP-010-15 LOGIC INPUTS DMOS POWER DRIVER OUTPUT FUNCTION TABLE Inputs CLEAR ENABLE DATA H H H L L L L L H L L H L = Low Logic Level H L X H L X LATCH SELECTION TABLE Addressed OUTPUT Other OUTPUTs L H R L H H R R R H H H H = High Logic Level X = Irrelevant Function Addressable Latch Memory 8-Line Demultiplexer Clear R = Previous State Select Inputs Addressed S2 (MSB) S1 S0 (LSB) OUTPUT L L L L H H H L L H H L L H L H L H L H L 0 1 2 3 4 5 6 H H H 7 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 Copyright (c) 2000, Allegro MicroSystems, Inc. 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER FUNCTIONAL BLOCK DIAGRAM D S0 (LSB) OUT 0 C1 CLR D OUT 1 C1 CLR S1 D OUT 2 C1 CLR D OUT 3 C1 CLR S2 (MSB) D OUT 4 C1 CLR D LOGIC SUPPLY V DD OUT 5 C1 CLR LOGIC GROUND D OUT 6 C1 CLR DATA D OUT 7 C1 ENABLE (ACTIVE LOW) CLR CLEAR POWER GROUND (ACTIVE LOW) Dwg. FP-047-1 Grounds (terminals 1, 9, 10, 11, and 20) must be connected externally to a single point. www.allegromicro.com 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER RECOMMENDED OPERATING CONDITIONS over operating temperature range Logic Supply Voltage Range, VDD ............... 4.5 V to 5.5 V High-Level Input Voltage, VIH ............................ 0.85VDD Low-level input voltage, VIL ................................. 0.15VDD ELECTRICAL CHARACTERISTICS at TA = +25C, VDD = 5 V, tir = tif 10 ns (unless otherwise specified). Limits Characteristic Logic Supply Voltage Symbol Test Conditions Min. Typ. Max. Units VDD Operating 4.5 5.0 5.5 V V(BR)DSX IO = 1 mA 50 -- -- V IDSX VO = 40 V -- 0.05 1.0 A VO = 40 V, TA = 125C -- 0.15 5.0 A IO = 250 mA, VDD = 4.5 V -- 1.3 2.0 IO = 250 mA, VDD = 4.5 V, TA = 125C -- 2.0 3.2 IO = 500 mA, VDD = 4.5 V (see note) -- 1.3 2.0 VDS(on) = 0.5 V, TA = 85C -- 250 -- mA IIH VI = VDD = 5.5 V -- -- 1.0 A IIL VI = 0, VDD = 5.5 V -- -- -1.0 A tPLH IO = 250 mA, CL = 30 pF -- 625 -- ns tPHL IO = 250 mA, CL = 30 pF -- 140 -- ns Output Rise Time tr IO = 250 mA, CL = 30 pF -- 650 -- ns Output Fall Time tf IO = 250 mA, CL = 30 pF -- 400 -- ns IDD(off) VDD = 5.5 V, Outputs OFF -- 15 100 A IDD(on) VDD = 5.5 V, Outputs ON -- 150 300 A Output Breakdown Voltage Off-State Output Current Static Drain-Source On-State Resistance Nominal Output Current Logic Input Current Prop. Delay Time Supply Current rDS(on) IO(nom) Typical Data is at VDD = 5 V and is for design information only. NOTE -- Pulse test, duration 100 s, duty cycle 2%. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER FUNCTIONAL DESCRIPTION and INPUT REQUIREMENTS Four modes of operation are selectable by controlling the CLEAR and ENABLE inputs as shown above. ENABLE DATA In the addressable-latch mode, data at the DATA input is written into the addressed transparent latch. The addressed output inverts the data input with all other outputs remaining in their previous states. 50% t PLH t PHL 90% ADDRESSED OUTPUT 10% tr tf Dwg. WP-036 OUTPUT SWITCHING TIME ENABLE DATA In the demultiplexing/decoding mode, the addressed output inverts the data input and all other outputs are OFF. 50% t h(D) t su(D) In the memory mode, all outputs remain in their previous states and are unaffected by the DATA or address (Sn) inputs. To prevent entering erroneus data in the latches, ENABLE should be held HIGH while the address lines are changing. In the clear mode, all outputs are OFF and are unaffected by the DATA or address (SN) inputs. 50% t w(D) Dwg. WP-037 DATA INPUT REQUIREMENTS Data Active Time Before Enable (Data Set-Up Time), tsu(D) .............................................. 20 ns Data Active Time After Enable (Data Hold Time), th(D) ................................................... 20 ns Data Pulse Width, tw(D) ....................................................... 40 ns Input Logic High, VIH ................................................ 0.85VDD Input Logic Low, VIL ................................................. 0.15VDD www.allegromicro.com Given the appropriate inputs, when DATA is LOW for a given address, the output is OFF; when DATA is HIGH, the output is ON and can sink current. 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER TEST CIRCUITS +15 V 0.11 INPUT 100 mH tav IAS = 1.0 A IO DUT OUT VO V(BR)DSX VO(ON) Dwg. EP-066-1 EAS = IAS x V(BR)DSX x tAV/2 Single-Pulse Avalanche Energy Test Circuit and Waveforms 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER TERMINAL DESCRIPTIONS Terminal No. Terminal Name Function 1 POWER GROUND 2 LOGIC SUPPLY 3 S0 4 OUT0 Current-sinking, open-drain DMOS output, address 000. 5 OUT1 Current-sinking, open-drain DMOS output, address 001. 6 OUT2 Current-sinking, open-drain DMOS output, address 010. 7 OUT3 Current-sinking, open-drain DMOS output, address 011. 8 S1 9 LOGIC GROUND Reference terminal for input voltage measurements. 10 POWER GROUND Reference terminal for output voltage measurements (OUT0-3). 11 POWER GROUND Reference terminal for output voltage measurements (OUT4-7). 12 S2 13 ENABLE 14 OUT4 Current-sinking, open-drain DMOS output, address 100. 15 OUT5 Current-sinking, open-drain DMOS output, address 101. 16 OUT6 Current-sinking, open-drain DMOS output, address 110. 17 OUT7 Current-sinking, open-drain DMOS output, address 111. 18 DATA CMOS data input to the addressed output latch. When enabled, the addressed output inverts the data input (DATA = HIGH, OUTPUT = LOW). 19 CLEAR Mode control input; see Function Table. 20 POWER GROUND Reference terminal for output voltage measurements (OUT0-3). (VDD) The logic supply voltage (typically 5 V). Binary-coded output-select input, least-significant bit. Binary-coded output-select input. Binary-coded output-select input, most-significant bit. Mode control input; see Function Table. Reference terminal for output voltage measurements (OUT4-7). NOTE -- Grounds (terminals 1, 9, 10, 11, and 20) must be connected externally to a single point. www.allegromicro.com 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER A6259KA Dimensions in Inches (controlling dimensions) 20 0.014 0.008 11 0.430 MAX 0.280 0.240 0.300 BSC 1 0.070 0.045 0.100 1.060 0.980 10 0.005 BSC MIN 0.210 MAX 0.015 0.150 0.115 MIN 0.022 0.014 Dwg. MA-001-20 in Dimensions in Millimeters (for reference only) 20 0.355 0.204 11 10.92 MAX 7.11 6.10 7.62 BSC 1 1.77 1.15 2.54 26.92 24.89 10 0.13 BSC MIN 5.33 MAX 0.39 3.81 2.93 MIN 0.558 0.356 Dwg. MA-001-20 mm NOTES:1. Exact body and lead configuration at vendor's option within limits shown. 2. Lead spacing tolerance is non-cumulative. 3. Lead thickness is measured at seating plane or below. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER A6259KLW Dimensions in Inches (for reference only) 20 11 0.0125 0.0091 0.419 0.394 0.2992 0.2914 0.050 0.016 0.020 0.013 1 2 0.050 3 0 TO 8 BSC 0.5118 0.4961 0.0926 0.1043 0.0040 MIN. Dwg. MA-008-20 in Dimensions in Millimeters (controlling dimensions) 20 11 0.32 0.23 10.65 10.00 7.60 7.40 1.27 0.40 0.51 0.33 1 2 1.27 3 13.00 12.60 BSC 0 TO 8 2.65 2.35 0.10 MIN. Dwg. MA-008-20 mm NOTES:1. Exact body and lead configuration at vendor's option within limits shown. 2. Lead spacing tolerance is non-cumulative. www.allegromicro.com 6259 8-BIT ADDRESSABLE DMOS POWER DRIVER The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000