T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10SECK/J4 Super Bright Orange Features Description z Low power consumption. The Orange source color devices are made with AlGaInP z Popular T-1 diameter package. Light Emitting Diode. z General purpose leads. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226 Selection Guide Part No. Dice WP710A10SECK/J4 Iv (mcd) [2] @ 20mA Lens Type Super Bright Orange (AlGaInP) Water Clear Viewing Angle [1] Min. Typ. 2700 4000 *1500 *3000 21/2 34 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Orange D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 611 nm IF=20mA Super Bright Orange 605 nm IF=20mA Spectral Line Half-width Super Bright Orange 17 nm IF=20mA C Capacitance Super Bright Orange 27 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2.2 2.8 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Orange Units Power dissipation 84 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226 Super Bright Orange WP710A10SECK/J4 SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226 PACKING & LABEL SPECIFICATIONS WP710A10SECK/J4 SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226 SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: WP710A10SECK/J4