Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model
C
2
5N
50Z
4
Features:
• DC – 3.0 GHz
• 25 Watts
• Aluminum Nitride Ceramic
• Non-Nichrome Resistive
Element
• 100% Tested
• RoHS Compliant
ALN SMT Termination
25 Watts, 50Ω
General Specifications
Resistive Element Thick film
Terminations Matte Tin Finish
Substrate Aluminum Nitride
Electrical Specifications
Resistance value: 50 ohms
Frequency Range; DC – 3.0 GHz
Power: 25 Watts
VSWR: 1.25:1
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. Operating temperature is -55ºC to 125ºC (see
chart for derating temperatures).
All dimensions in inches.
Specifications subject to change with out notice.
Outline Drawing
C25N50Z4A (097) Rev C
RoHS
Compliant
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model
C
2
5
N
50Z
4
Typical performance
Mounting Procedure: Power De-rating:
1. Solder part in place using SN96 type solder with a controlled temperature iron.
2. Drill thermal vias through PCB and fill with solder.
3. To ensure good thermal connectivity to heat sink, which is critical for proper
operation drill and tap heatsink and mount PCB to heat sink using screws.
SOLDER
PASTE
HEATSINK
SOLDER
FILLED VIA
SCREW
(2 PLS.)
MOUNTING PROCEDURE
PC BOARD
C25N50Z4A (097) Rev C
RoHS
Compliant