ME910C1N002T7A4000 - Telit

Product Description

The ME910C1 is the Category M1/NB1 evolution of the Telit

LE910 Series of LTE modules. Specified in the approved

Release 13 of the 3GPP standard, Cat M1/NB1 devices are

specifically tailored for IoT applications, offering optimized

power consumption and enhanced coverage. This model

further enriches the widely deployed Telit xE910 family of

28 x 28 mm LGA modules.

The ME910C1 is an LTE UE Category M1/NB1 device with

maximum downlink and uplink data rate of 1Mbps. This

next generation of products supports the new features

specified by 3GPP to boost IoT applications, such as the

Power Saving Mode (PSM) and the extended Discontinu-

ous Reception (eDRX), which allow the devices to wake up

periodically to deliver only very small amounts of data to

the network and then go back to sleep for most of the time,

thus allowing longer battery operation. Enhanced cover-

age, with up to +15dB/+20dB in maximum coupling loss

(MCL) compared to the other cellular technologies, is also

one of the key benefits of this new LTE flavour. LTE Cat

M1/NB1 devices are therefore optimized in cost, size and

power consumption compared to higher UE categories.

These advantages make the ME910C1 the perfect platform

to enable a quick implementation of LTE technology in IoT/

M2M where low cost and low power are more relevant than

high speed.

The ME910C1 helps increase the addressable market for

LTE technology to include a broad range of new applica-

tions and use cases best served with lower maximum data

rate, ultra-low power, reduced complexity and cost. Some

examples are smart meters, industrial sensors, healthcare

monitors, home automation, asset tracker and many more

low data rate IoT devices. The ME910C1 is offered in differ-

ent band configurations for deployment in North America

(Verizon and AT&T 4G networks), and in EMEA, the latter

with dual mode Cat M1/NB1 (NB-IoT) capability. It is highly

recommended for new designs, but also in particular as a

migration path for existing GPRS or CDMA devices, both

new and updated designs benefit from a significant

extension in lifecycle with LTE Cat M1/NB1.

Key Benets

• Design once and deploy globally, thanks to the xE910

form factor family

• Perfect platform for regional IoT applications such as

smart metering, security & surveillance, point of sales,

health monitoring, fleet management, asset tracking and

wearable devices

• LTE UE Category M1/NB1 compliant to the latest 3GPP

Release 13 enhanced Machine-Type Communication

(eMTC) and Narrow Band IoT (NB-IoT), specifically

designed for IoT use cases, offering minimum power

consumption and extended coverage

Family Concept

The ME910C1 is a member of Telit’s flagship xE910 module

family delivering 4G radio access technology in the 28.2 x

28.2 x 2.2mm family form factor. The Telit xE910 Unified

Form Factor Family is comprised of 2G, 3G, and 4G that are

3GPP and 3GPP2 products sharing a common form factor

as well as electrical and programming interfaces which

allows developers to implement a “design once, use any-

where” strategy.

Connecting the world

from the inside out 1

AVAILABLE FOR

EMEA

North America

IoT Modules IoT PlatformsIoT Connectivity

Complete,

Ready to Use Access

to the Internet of Things

LTE Cat M1/NB1 Embedded

ME910C1 Series

28.2 mm

2.2 mm

28.2 mm

Product Features

• LTE UE Category M1/NB1

• 3GPP release 13 compliant

• Half Duplex FDD

• Single Rx, single antenna

• 3GPP Rel. 12 Power Saving Mode (PSM)

• 3GPP Rel. 13 Extended Discontinuous

Reception (eDRX)

• 3GPP Rel. 13 Extended coverage

• Control via AT commands according to 3GPP

TS27.005, 27.007 and customized

AT commands

• SIM application Tool Kit 3GPP TS 51.01

• SMS

• IPv4/IPv6 stack with TCP and UDP protocol

• OMA Lightweight M2M (LWM2M)

• Over-the-Air firmware update

(for future release)

• Telit Application Development Environment:

AppZone C (for future release)

• SSL

• Optional embedded GNSS

(GPS, GLONASS, Beidou, Galileo)

Data

LTE Category M1

• Uplink up to 375 kbps

• Downlink up to 300 kbps

LTE Category NB1

• Uplink up to 20 kbps (single-tone),

250 kbps (multi-tone)

• Downlink up to 250 kbps

Physical & Environmental

• Dimensions 28.2 x 28.2 x 2.2 mm

• Extended temperature range: -40 to +85 °C

Interfaces

• 10 I/O ports maximum including

multifunctional I/Os

• USB 2.0 HS

• UART

• SPI

• I2C

• 1.8 V / 3 V SIM interface

Electrical

• Supply voltage

- Nominal: 3.8 VDC

- Range: 3.4 - 4.2 VDC

ME910C1 Series

ME910C1-NV ME910C1-NA ME910C1-E1 ME910C1-AU

Market North America (Verizon) North America (AT&T) Europe Australia

M1/NB1 support M1 M1 Dual mode M1&NB1 Dual mode M1&NB1

Frequencies

4G bands (MHz) B4(AWS1700)

B13(700)

B2(1900)

B4(AWS1700)

B12(700)

B3(1800)

B8(900)

B20(800)

B3(1800)

B5(850)

B8(900)

B28(700)

Approvals FCC, GCF, Verizon FCC, PTCRB, AT&T RED, GCF RCM, Telstra

[12.2017]

Telit reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be

subject to intellectual property rights. The information contained herein is provided “as is.” No warranty of any kind, either express or implied, is made in relation to

the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by Telit at any time. For most recent documents,

please visit www.telit.com

QUESTIONS? VISIT WWW.TELIT.COM/CONTACT-US

www.telit.com/facebook | www.telit.com/googleplus | www.telit.com/linkedin | www.telit.com/twitter