DATA SH EET
Product specification
File under Passive Components, PA02 1995 Apr 11
PASSIVE COMPONENTS
Philips Components
2322 633 5/7/8
NTC thermistors,
high-temperature sensors
1995 Apr 11 2
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
FEATURES
•Small diameter
•Quick response to temperature
change
•High stability over a long life
•Wide temperature range from
−40 to +300 °C
•Resistant to corrosive atmospheres
and harsh environments.
APPLICATION
•High temperature measurement
control
– Domestic appliances
– Automotive systems
– Industrial process control.
DESCRIPTION
These thermistors have a negative
temperature coefficient and are
mounted in a glass envelope:
2322 633 5.... (SOD80) without
leads and suitable for surface
mounting
2322 633 7.... (SOD27) with
nickel-plated leads
2322 633 8.... (SOD27) with tinned
copper leads.
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Temperature range:
2322 633 5.... −40 to +200 °C
2322 633 7.... 0 to 300 °C
2322 633 8.... −40 to +200 °C
Resistance value at 25 °C (R25) 10 to 100 kΩ
Tolerance on R25-value ±5 and ±10 %
B25/85-value 3977 K
Tolerance on B25/85-value ±1.3 %
Rated dissipation 100 mW
Dissipation factor 2.5 mW/K
Response time 0.9 s
Thermal time constant τ6s
Temperature coefficient at 25 °C−4.38 %/K
Climatic category:
2322 633 5.... 40/155/56
2322 633 7.... 0/300/56
2322 633 8.... 40/200/56
Mass:
2322 633 5.... ≈0.03 g
2322 633 7.... ≈0.14 g
2322 633 8.... ≈0.14 g
MECHANICAL DATA
Marking
None.
Mounting
By soldering in any position.
1995 Apr 11 3
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Outlines
Fig.1 Component outline for 2322 633 7/8.... (SOD27).
Dimensions in mm.
handbook, 4 columns
MBA936
O
4.25 max25.4 min 25.4 min
0.56
max
1.85 maxO
Fig.2 Component outline for
2322 633 5.... (SOD80).
Dimensions in mm.
handbook, 2 columns
MBC018
1.7
max
0.3 0.3
O
3.7
max
ELECTRICAL CHARACTERISTICS
Unless otherwise stated, measurements are in accordance with
“IEC publication 539”
; see also Table 1
Table 1 R25-values, B25/85-values and catalogue numbers
The thermistors have a 12-digit catalogue number starting with 2322 633 5..../7..../8....; the subsequent 4 digits indicate
the resistance value and tolerance.
Notes
1. 2322 633 7.... only available at 100 kΩ.
2. Only available in blister tape.
PARAMETER VALUE
2322 633 5.... 2322 633 7.... 2322 633 8....
B25/85-values 3977 K
Tolerance on B-value ±1.3%
Ratio RT/R25 Table 2 Table 3 Table 4
Rated dissipation 100 mW
Deviation in resistance value due to B-tolerance Table 2 Table 3 Table 4
Temperature coefficient Table 2 Table 3 Table 4
R25
(kΩ)B25/85-VALUE
CATALOGUE NUMBER 2322 633 .....
SOD27 (leaded) SOD80 (SMD)(2)
633 5....
633 8....
tinned-copper 633 7....(1)
nickel-plated
10% 5% 10% 5% 10% 5%
10 3977 K ±1.3% 2103 3103 −−2103 3103
20 3977 K ±1.3% 2203 3203 −−2203 3203
30 3977 K ±1.3% 2303 3303 −−2303 3303
100 3977 K ±1.3% 2104 3104 2104 3104 2104 3104
1995 Apr 11 4
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Derating
MLC936
05540 85 T ( C)
o155
100
0
P
(%)
amb
Fig.3 Derating curve for 2322 633 5.... series.
MLC937
0 55 85 200
T ( C)
o300
100
0
P
(%)
amb
Fig.4 Derating curve for 2322 633 7.... series.
MLC938
05540 85 200
T ( C)
o
100
0
P
(%)
amb
Fig.5 Derating curve for 2322 633 8.... series.
1995 Apr 11 5
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Stability and R-T characteristics
Fig.6 Stability of glass encapsulated NTCs after thermal shock test.
handbook, full pagewidth
0
0.8
0.6
0.2
MLC989
106
105
104
103
0.4
∆R
R
(%)
0.4
0
0.1
0.3
0.2
∆T
(K)
∆T (25 deg)
∆T (85 deg)
∆R 85/R 85
∆R 25/R 25
cycles
Fig.7 Typical R-T characteristics for the 2322 633 5/7/8 series.
handbook, full pagewidth
50 50 150 250 350
104
10 2
102
103
MLC988
1
10
10 1
T ( C)
o
R
(Ω)
100 kΩ
30 kΩ
20 kΩ
10 kΩ
1995 Apr 11 6
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Table 2 Resistance values at intermediate temperatures for 2322 633 5.... series
Tamb
(°C) RT/R25
∆R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
R25
(kΩ)
2322 633 .....; see Table 4, note 1
5.103 5.203 5.303 5.104
−40 33.06 4.65 6.59 330.6 661.2 991.8 3306
−35 23.90 4.21 6.37 239.0 478.1 717.1 2390
−30 17.47 3.79 6.16 174.7 349.4 524.1 1747
−25 12.90 3.38 5.96 129.0 258.0 387.0 1290
−20 9.621 2.99 5.77 96.21 192.4 288.6 962.1
−15 7.242 2.61 5.59 72.42 144.8 217.3 724.2
−10 5.501 2.24 5.41 55.01 110.0 165.0 550.1
−5 4.214 1.89 5.24 42.14 84.28 126.4 421.4
0 3.255 1.55 5.08 32.55 65.09 97.64 325.5
5 2.534 1.22 4.93 25.34 50.67 76.01 253.4
10 1.987 0.90 4.78 19.87 39.74 59.62 198.7
15 1.570 0.59 4.64 15.70 31.40 47.10 157.0
20 1.249 0.29 4.51 12.49 24.98 37.46 124.9
25 1.000 0.00 4.38 10.00 20.00 30.00 100.0
30 0.8059 0.28 4.25 8.059 16.12 24.18 80.59
35 0.6534 0.55 4.13 6.534 13.07 19.60 65.34
40 0.5329 0.82 4.02 5.329 10.66 15.99 53.29
45 0.4371 1.08 3.91 4.371 8.742 13.11 43.71
50 0.3604 1.34 3.80 3.604 7.209 10.81 36.04
55 0.2988 1.58 3.70 2.988 5.976 8.963 29.88
60 0.2489 1.82 3.60 2.489 4.978 7.467 24.89
65 0.2084 2.06 3.51 2.084 4.168 6.251 20.84
70 0.1753 2.29 3.42 1.753 3.505 5.258 17.53
75 0.1481 2.51 3.33 1.481 2.961 4.442 14.81
80 0.1256 2.73 3.24 1.256 2.512 3.769 12.56
85 0.1070 2.95 3.16 1.070 2.141 3.211 10.70
90 0.09156 3.16 3.08 0.9156 1.831 2.747 9.156
95 0.07862 3.36 3.01 0.7862 1.572 2.359 7.862
100 0.06777 3.56 2.93 0.6777 1.355 2.033 6.777
105 0.05863 3.76 2.86 0.5863 1.173 1.759 5.863
110 0.05089 3.95 2.79 0.5089 1.018 1.527 5.089
115 0.04433 4.13 2.73 0.4433 0.8865 1.330 4.433
120 0.03873 4.32 2.66 0.3873 0.7747 1.162 3.873
125 0.03395 4.50 2.60 0.3395 0.6791 1.019 3.395
130 0.02985 4.67 2.54 0.2985 0.5971 0.8956 2.985
135 0.02633 4.84 2.49 0.2633 0.5265 0.7898 2.633
140 0.02328 5.01 2.43 0.2328 0.4656 0.6984 2.328
145 0.02065 5.17 2.38 0.2065 0.4129 0.6194 2.065
150 0.01836 5.33 2.32 0.1836 0.3671 0.5507 1.836
1995 Apr 11 7
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Table 3 Resistance values at intermediate temperatures for 2322 633 7.... series
Tamb
(°C) RT/R25
∆R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
R25
(kΩ)
2322 633 .....; see Table 4, note 1
7.104
0 3.255 1.55 5.08 325.5
5 2.534 1.22 4.93 253.4
10 1.987 0.90 4.78 198.7
15 1.570 0.59 4.64 157.0
20 1.249 0.29 4.51 124.9
25 1.000 0.00 4.38 100.0
30 0.8059 0.28 4.25 80.59
35 0.6534 0.55 4.13 65.34
40 0.5329 0.82 4.02 53.29
45 0.4371 1.08 3.91 43.71
50 0.3604 1.34 3.80 36.04
55 0.2988 1.58 3.70 29.88
60 0.2489 1.82 3.60 24.89
65 0.2084 2.06 3.51 20.84
70 0.1753 2.29 3.42 17.53
75 0.1481 2.51 3.33 14.81
80 0.1256 2.73 3.24 12.56
85 0.1070 2.95 3.16 10.70
90 0.09156 3.16 3.08 9.156
95 0.07862 3.36 3.01 7.862
100 0.06777 3.56 2.93 6.777
105 0.05863 3.76 2.86 5.863
110 0.05089 3.95 2.79 5.089
115 0.04433 4.13 2.73 4.433
120 0.03873 4.32 2.66 3.873
125 0.03395 4.50 2.60 3.395
130 0.02985 4.67 2.54 2.985
135 0.02633 4.84 2.49 2.633
140 0.02328 2.43 2.43 2.328
145 0.02065 2.38 2.38 2.065
150 0.01836 2.32 2.32 1.836
155 0.01636 2.27 2.27 1.636
160 0.01455 2.23 2.23 1.455
165 0.01303 2.18 2.18 1.303
170 0.01169 2.14 2.14 1.169
175 0.01052 2.09 2.09 1.052
1995 Apr 11 8
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
180 0.00948 2.05 2.05 0.948
185 0.00857 2.01 2.01 0.857
190 0.00776 1.97 1.97 0.776
195 0.00704 1.93 1.93 0.704
200 0.00640 1.89 1.89 0.640
205 0.00575 1.87 1.87 0.575
210 0.00524 1.83 1.83 0.524
215 0.00479 1.80 1.80 0.479
220 0.00438 1.76 1.76 0.438
225 0.00402 1.73 1.73 0.402
230 0.00369 1.70 1.70 0.369
235 0.00339 1.66 1.66 0.339
240 0.00312 1.63 1.63 0.312
245 0.00288 1.60 1.60 0.288
250 0.00266 1.57 1.57 0.266
255 0.00246 1.55 1.55 0.246
260 0.00228 1.52 1.52 0.228
265 0.00211 1.49 1.49 0.211
270 0.00196 1.47 1.47 0.196
275 0.00182 1.44 1.44 0.182
280 0.00170 1.42 1.42 0.170
285 0.00158 1.39 1.39 0.158
290 0.00148 1.37 1.37 0.148
295 0.00138 1.35 1.35 0.138
300 0.00129 1.32 1.32 0.129
Tamb
(°C) RT/R25
∆R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
R25
(kΩ)
2322 633 .....; see Table 4, note 1
7.104
1995 Apr 11 9
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Table 4 Resistance values at intermediate temperatures for 2322 633 8.... series
Tamb
(°C) RT/R25
∆R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
R25
(kΩ)
2322 633 .....; see note 1
8.103 8.203 8.303 8.104
−40 33.06 4.65 6.59 330.6 661.2 991.8 3306
−35 23.90 4.21 6.37 239.0 478.1 717.1 2390
−30 17.47 3.79 6.16 174.7 349.4 524.1 1747
−25 12.90 3.38 5.96 129.0 258.0 387.0 1290
−20 9.621 2.99 5.77 96.21 192.4 288.6 962.1
−15 7.242 2.61 5.59 72.42 144.8 217.3 724.2
−10 5.501 2.24 5.41 55.01 110.0 165.0 550.1
−5 4.214 1.89 5.24 42.14 84.28 126.4 421.4
0 3.255 1.55 5.08 32.55 65.09 97.64 325.5
5 2.534 1.22 4.93 25.34 50.67 76.01 253.4
10 1.987 0.90 4.78 19.87 39.74 59.62 198.7
15 1.570 0.59 4.64 15.70 31.40 47.10 157.0
20 1.249 0.29 4.51 12.49 24.98 37.46 124.9
25 1.000 0.00 4.38 10.00 20.00 30.00 100.0
30 0.8059 0.28 4.25 8.059 16.12 24.18 80.59
35 0.6534 0.55 4.13 6.534 13.07 19.60 65.34
40 0.5329 0.82 4.02 5.329 10.66 15.99 53.29
45 0.4371 1.08 3.91 4.371 8.742 13.11 43.71
50 0.3604 1.34 3.80 3.604 7.209 10.81 36.04
55 0.2988 1.58 3.70 2.988 5.976 8.963 29.88
60 0.2489 1.82 3.60 2.489 4.978 7.467 24.89
65 0.2084 2.06 3.51 2.084 4.168 6.251 20.84
70 0.1753 2.29 3.42 1.753 3.505 5.258 17.53
75 0.1481 2.51 3.33 1.481 2.961 4.442 14.81
80 0.1256 2.73 3.24 1.256 2.512 3.769 12.56
85 0.1070 2.95 3.16 1.070 2.141 3.211 10.70
90 0.09156 3.16 3.08 0.9156 1.831 2.747 9.156
95 0.07862 3.36 3.01 0.7862 1.572 2.359 7.862
100 0.06777 3.56 2.93 0.6777 1.355 2.033 6.777
105 0.05863 3.76 2.86 0.5863 1.173 1.759 5.863
110 0.05089 3.95 2.79 0.5089 1.018 1.527 5.089
115 0.04433 4.13 2.73 0.4433 0.8865 1.330 4.433
120 0.03873 4.32 2.66 0.3873 0.7747 1.162 3.873
125 0.03395 4.50 2.60 0.3395 0.6791 1.019 3.395
130 0.02985 4.67 2.54 0.2985 0.5971 0.8956 2.985
135 0.02633 4.84 2.49 0.2633 0.5265 0.7898 2.633
1995 Apr 11 10
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Note
1. Replace dot in code number by a number according to the following list and depending on tolerance on
required R25-value:
a) 3 for a tolerance of ±5%.
b) 2 for a tolerance of ±10%.
PACKAGING AND ORDERING INFORMATION
Table 5 Catalogue numbers and packaging quantities
Notes
1. Catalogue number 2322 633 3.... is the series 2322 633 8.... on tape.
2. Catalogue number 2322 633 4.... is the series 2322 633 7.... on tape.
140 0.02328 5.01 2.43 0.2328 0.4656 0.6984 2.328
145 0.02065 5.17 2.38 0.2065 0.4129 0.6194 2.065
150 0.01836 5.33 2.32 0.1836 0.3671 0.5507 1.836
155 0.01636 5.49 2.27 0.1636 0.3273 0.4909 1.636
160 0.01455 5.65 2.23 0.1455 0.2910 0.4365 1.455
165 0.01303 5.80 2.18 0.1303 0.2606 0.3909 1.303
170 0.01169 5.95 2.14 0.1169 0.2339 0.3508 1.169
175 0.01052 6.10 2.09 0.1052 0.2104 0.3156 1.052
180 0.00948 6.24 2.05 0.09484 0.1897 0.2845 0.9484
185 0.00857 6.38 2.01 0.08569 0.1714 0.2571 0.8569
190 0.00776 6.52 1.97 0.07757 0.1551 0.2327 0.7757
195 0.00704 6.66 1.93 0.07037 0.1407 0.2111 0.7037
200 0.00640 6.79 1.89 0.06396 0.1279 0.1919 0.6396
CATALOGUE
NUMBER BULK BLISTER TAPE
2322 633 3....; note 1 −−10000
2322 633 4....; note 2 −−10000
2322 633 5.... −2500 −
2322 633 7.... 1000 −−
2322 633 8.... 1000 −−
T
amb
(°C) RT/R25
∆R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
R25
(kΩ)
2322 633 .....; see note 1
8.103 8.203 8.303 8.104
1995 Apr 11 11
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Blister tape, reel and bandolier data
Fig.8 Blister tape.
h
andbook, full pagewidth
MBE407
K0
KT1
D1
T
δδ
B
0
B
1
F
E
W
1
W
PP
2
P
0
D
Direction of unreeling
0
A5 max
0o
h
andbook, full pagewidth
MEA942
O
E
U
leader
fixing
tape
trailer
CBA
W
t
Fig.9 Reel.
1995 Apr 11 12
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Table 6 Blister tape and reel dimensions
Dimensions in mm unless otherwise stated; see Figs 8 and 9.
SYMBOL PARAMETER DIMENSIONS (mm)
NOMINAL TOLERANCE
Blister tape
K overall thickness <2.5 −
POCKET
A0length 2.1 +0.3
B0width >3.8 −
K0depth 2.1 +0.3
B1outside width <4.5 −
P pitch 4.0 ±0.1
D1hole diameter 1.0 ±0.1
FEED-HOLE
D0diameter 1.5 ±0.1
P0pitch 4.0 ±0.1
E distance 1.75 ±0.1
cumulative pitch error over 10 positions 0 ±0.1
CENTRE LINE
P2length 2.0 ±0.05
F width 3.5 ±0.1
FIXING TAPE
W1width <5.5 −
T1thickness <0.1 −
CARRIER TAPE
W thickness 8.0 ±0.2
δbending <0.3 −
T thickness <0.4 −
Reel
FLANGE
A diameter 180 +0
t thickness 1.5 +0.5
W space between flanges 9.5 ±0.5
HUB
B diameter 62.0 ±1.5
C spindle hole 12.75 +0.15/−0
KEY SLIT
E width 2.0 ±0.5
U depth 4.0 ±0.5
O location 120°−
1995 Apr 11 13
Philips Components Product specification
NTC thermistors,
high-temperature sensors 2322 633 5/7/8
Note to Table 6 and Fig.10
The bandolier of a 180 mm reel contains at least 2500 devices with no more than 0.5% empty positions. Three
consecutive empty places may be found provided this gap is followed by 6 consecutive devices.
The carrier tape starts (leader) and ends (trailer) with at least 75 empty positions (equivalent to 300 mm); the covering
foil is at least 300 mm. In order to fix the carrier tape a self-adhesive tape of 20 to 50 mm width is applied.
Fig.10 Thermistors on bandolier.
handbook, full pagewidth
MBC941
0.8 max
5
0.3
S
6 0.5
L2
L153 1.5
1.2
max
A black marker is printed on the tape of the bandolier after every 50 units.
The components are centred so that L1-L
2
= 1.2 mm. max.
The cumulative space (S) measured over 10 spacings = 50 ±2 mm.
