Instructions
Features Tech SpecsOverview
Product Datasheet (CH2AA)
1-800-383-7323 USA/CAN
www.energizer.com
Ener gi To Go
®
Instructions
S d k b tt t b tt f it t l d i t
.
queeze
ar
ray
u
ons a
o
om o
un
o re
ease cover an
a
n access
o
the battery cavity area.
2. Locate battery diagrams on inside body of charger and insert batteries facing
opposite directions as indicated by the battery diagrams.
3. S queeze bottom cover piece and reattach to charger unit.
4. Connect phone-specific connector to charger unit.
Connect your phone to the phone
.
-
.
•Unit will begin flashing within 10 seconds
•If the unit does not flash, change the batteries.
6. Your phone should indicate that it is charging.
•The unit will stop flashing when the charging process is complete.
•For best results do not leave charger connected to phone overnight.
To stop charging remove the connector from the phone
.
,
.
•Charger unit will stop flashing within 10 seconds.
8. Charger and batteries may become warm during the charging process.
For maximum charge time, use Energizer®Lithium batteries.
For best results: Charge your phone before its battery becomes fully exhausted.
Do not mix new and old batteries. Do not mix battery chemistries. Remove batteries from
charger when not in use for extended periods of time. Do not store batteries in charger.
Caution: Leave charger disconnected for at least 10 minutes before changing batteries .
Form No. EBC – 9201A ©Energizer Holdings, Inc. – Contents herein do not constitute a warranty. Page 3 of 4
View Demo