0 Items Sign In
SHOP BLOG LEARN FORUMS VIDEOS
BREAKOUT BOARDS / TOUCH / ADAFRUIT TOUCH SCREEN BREAKOUT BOARD FOR 4 PIN 1.0MM FPC
DESCRIPTION
If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a
medium pitch (1.0mm) connector soldered onto it, and it's broken out into the four resistive wires
of the panel. If you need a breakout for 0.5mm-pitch touch panels, check out this product. If you
want a breakout with a resistive-panel control driver chip on it, our STMPE I2C/SPI breakout or
USB AR1100 driver will do what you need!
This is a petite 0.5"x0.5" (12.7mm x 12.7mm) breakout board with two mounting holes as well
that you can use for strain relief. Works perfectly with our 7" touch screen and any other touch
1
ADD TO CART
Adafruit Touch Screen
Breakout Board for 4
pin 1.0mm FPC
PRODUCT ID: 3575
IN STOCK
1-9
10-99
100+
ADD TO WISHLIST
DESCRIPTION
TECHNICAL DETAILS
screen with 1.0mm pitch. The connector we use is double-sided so you can use it with top-
contact or bottom-contact flex PCBs.
Check out our great example Arduino library code that shows how to get readings, debounce,
and read the pressure from any touch screen (so you can detect when it's being touched and
how hard). The code is not complex and is easily ported to other microcontrollers.
TECHNICAL DETAILS
MAY WE ALSO SUGGEST...
New Products 8/9/2017
Product Dimensions: 12.7mm x 12.7mm x 4.5mm / 0.5" x 0.5" x 0.2"
Product Weight: 0.5g / 0.0oz
Touch screen breakout
board (0.5mm FPC)
Resistive Touch Screen
Controller - STMPE610
Resistive Touchscreen
Extension Cable - 20cm / 8"
Resistive Touch Screen to
USB Mouse Controller -
Resistive Touchscreen
Overlay - 7" diag. 165mm x
Resistive Touch screen -
3.7" Diagonal
EXPAND TO SEE DISTRIBUTORS
DISTRIBUTORS
CONTACT
"Science, engineering, design, and
