SERIES 77 Metal Shrink Boot Adapters 319-001 Low Profile EMI/RFI Adapter with Rotatable Coupling and Shield Sock How to Order Sample Part Number 319 Product Series 319 Connector Designator See connector designator table Angular Function B = 45 Basic Part Number 001 Finish Symbol B = cadmium plate, olive drab C = anodize, black G = hard coat, anodic M = electroless nickel NF = cadmium plate, olive drab over electroless nickel Shell Size See dimensions table Cable Entry Dash No. See cable entry dash number table Shield Length 1-inch increments, minimum 6 Inches Shrink Boot Omit for none; see cable entry and shrink boot table S 001 D BOOT K 06 -6 T Add "T" to Part Number for Standard Boot MIL-DTL-38999 Series I, II NOTES MIL-DTL-38999 Series III and IV 1. See Table I on page G-4 for connector designator interface dimensions 2. Cable Entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. O-Ring not supplied with Connector Designator A. 4. When maximum entry is exceeded, Style 2 will be supplied and dimensions F, G, H and J will not apply. Please consult factory. 5. Standard Boot Kit includes a straight lipped, type 1 material boot without adhesive. For additional material adhesive options order separately from section B 6. Glenair 600 series backshell assembly tools are recommnded for assembly and installation LN29729 PATT 105, PATT 603, PATT 608 Dimensions Shell Size - Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 32 36 G-14 16 MIL-DTL-5015, -26482, Series II and -83723 Series I and III ROTATABLE COUPLING G T IT Connector Designator A F H L S M S = straight NDA STA R A = 90 F F Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) G H Max Max 1.710 (43.4) .500 (12.7) 1.770 (45.0) .595 (15.1) 1.830 (46.5) .610 (15.5) 1.920 (48.8) .700 (17.8) 2.030 (51.6) .885 (22.5) 2.220 (56.4) .975 (24.8) 2.220 (56.4) .975 (24.8) 2.370 (60.2) 1.125 (28.6) 2.370 (60.2) 1.125 (28.6) 2.420 (61.5) 1.225 (31.1) 2.520 (64.0) 1.575 (40.0) 2.610 (66.3) 1.775 (45.1) J Max 1.730 (43.9) 1.850 (47.0) 1.870 (47.5) 1.940 (49.3) 2.030 (51.6) 2.200 (55.9) 2.200 (55.9) 2.310 (58.7) 2.310 (58.7) 2.480 (63.0) 2.730 (69.3) 2.730 (69.3) (c) 2017 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 * Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Metal Shrink Boot Adapters 319-001 Low Profile EMI/RFI Adapter with Rotatable Coupling and Shield Sock See Pages G-4 and G-5 for Adapter Interface Dimensions O-Ring, Typ (See Note 3) 1.0 (25.4) Shield Length (Approx.) A Thread (Table I) Typ H C (Table I) Typ Cable Entry, Typ .140/.130, Typ Single Layer Shield (Tinned Copper) J Sym S - Straight Shield Length F Single Layer Shield (Tinned Copper) G Sym A - 90 Shield Length 1.75 (44.45) MAX .88 (22.4) Max Sym B - 45 STYLE II (45 and 90) See Note 4 Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 Cable Entry .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .875 (22.2) Cable Entry and Shrink Boot Shrink Boot Dash Cable Part Number No. Entry N/A 13 .938 (23.8) N/A 14 1.000 (25.4) 770-001S103 15 1.250 (31.8) 770-001S103 16 1.500 (38.1) 770-001S103 17 1.750 (44.5) 770-001S104 18 2.000 (50.8) 770-001S104 19 1.125 (28.6) 770-001S104 20 1.375 (34.9) 770-001S105 21 1.625 (41.3) 770-001S105 22 1.062 (27.0) 770-001S105 23 1.188 (30.2) 770-001S106 24 1.875 (47.6) STYLE II (STRAIGHT ONLY) See Note 4 G Shrink Boot Part Number 770-001S106 770-001S106 770-001S107 770-001S108 770-001S108 770-001S109 770-001S107 770-001S107 770-001S108 770-001S106 770-001S107 770-001S109 (c) 2017 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 * Dimensions in Inches (millimeters) are subject to change without notice. G-15 SERIES 77 Metal Shrink Boot Adapters 319-044 Standard Profile EMI/RFI Adapter with Rotatable Self-Locking Coupling and Shield Sock How to Order Sample Part Number 319 F Product Series 319 Connector Designator See connector designator table Angular Function H = 45 Basic Part Number 044 Finish Symbol B = cadmium plate, olive drab C = anodize, black G = hard coat, anodic M = electroless nickel NF = cadmium plate, olive drab over electroless nickel Shell Size See dimensions table Cable Entry Dash No. See cable entry dash number table Shield Length 1-inch increments, minimum 6 Inches Length (S Only) 1/2-inch increments (e.g. 4 = 2 inches) Shrink Boot T = shrink boot; see cable entry and shrink boots table Omit for none MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV LN29729 PATT 105, PATT 603, PATT 608 SELF-LOCKING Dimensions Shell Size - Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 G-16 F Max .986 (25.0) 1.016 (25.8) 1.038 (26.4) 1.056 (26.8) 1.066 (27.1) 1.106 (28.1) 1.136 (28.9) 1.156 (29.4) 1.186 (30.1) 16 G Max 1.045 (26.5) 1.075 (27.3) 1.097 (27.9) 1.125 (28.6) 1.145 (29.1) 1.165 (29.6) 1.195 (30.4) 1.215 (30.9) 1.245 (31.6) D BOOT K H Max 1.096 (27.8) 1.166 (29.6) 1.226 (31.1) 1.286 (32.7) 1.346 (34.2) 1.396 (35.5) 1.466 (37.2) 1.516 (38.5) 1.586 (40.3) J Max 1.155 (29.3) 1.225 (31.1) 1.285 (32.6) 1.345 (34.2) 1.405 (35.7) 1.455 (37.0) 1.525 (38.7) 1.575 (40.0) 1.645 (41.8) T IT MIL-DTL-5015, -26482, Series II and -83723 Series I and III ROTATABLE COUPLING G M 06 -6 -4 T S = straight Connector Designator A F H L S 044 NDA STA R J = 90 J Add "T" to Part Number for Standard Boot Cable Entry and Shrink Boots Dash Cable Shrink Boot No. Entry Part Number 01 .188 (4.8) N/A 02 .250 (6.4) N/A 03 .312 (7.9) 770-001S103 04 .375 (9.5) 770-001S103 05 .438 (11.1) 770-001S103 06 .500 (12.7) 770-001S104 07 .562 (14.3) 770-001S104 08 .625 (15.9) 770-001S104 09 .688 (17.5) 770-001S105 10 .750 (19.1) 770-001S105 11 .812 (20.6) 770-001S105 12 .875 (22.2) 770-001S106 13 .938 (23.8) 770-001S106 14 1.000 (25.4) 770-001S106 15 1.250 (31.8) 770-001S107 16 1.500 (38.1) 770-001S107 17 1.750 (44.5) 770-001S108 18 2.000 (50.8) 770-001S109 19 1.125 (28.6) 770-001S107 20 1.375 (34.9) 770-001S107 21 1.625 (41.3) 770-001S108 22 1.062 (27.0) 770-001S106 23 1.188 (30.2) 770-001S107 24 1.875 (47.6) 770-001S109 (c) 2017 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 * Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Metal Shrink Boot Adapters 319-044 Standard Profile EMI/RFI Adapter with Rotatable Self-Locking Coupling and Shield Sock See Pages G-4 and G-5 for Adapter Interface Dimensions A Thread, Typ (Table I) * Length .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) O-Ring (See Note 2) H Length Typ E, Typ. (Table I) Cable Entry J Single Layer Shield Typ. (Tinned Copper) Anti-Rotation Device (Typ.) Sym J - 90 Sym S - Straight NOTES 1. Cable Entry is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. O-Ring not supplied with Connector Designator A. 3. When maximum entry is exceeded, Style II will be supplied. Dimensions F, G, H and J will not apply. 4. For shorter lengths on straight adapters, please consult the factory 5. Standard Boot Kit includes a straight lipped, type 1 material boot without adhesive. For additional material adhesive options order separately from section B 6. Glenair 600 series backshell assembly tools are recommnded for assembly and installation Shield Length (Approx.) F G Sym H - 45 Length .060 (1.52) Min. Order Length 2.0 (50.8) (See Note 4) STYLE II STRAIGHT See Note 3 G 1.00 (25.4) Max STYLE II 45 & 90 See Note 3 (c) 2017 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 * Dimensions in Inches (millimeters) are subject to change without notice. G-17