G-
G
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog
U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice.
Connector Designator
AMIL-DTL-, -, Series II and - Series I and III
FMIL-DTL- Series I, II
HMIL-DTL- Series III and IV
LLN
SPATT , PATT , PATT
ROTATABLE COUPLING
Dimensions
Shell Size - Conn.
Desig. F
Max
G
Max
H
Max
J
MaxA-F-L-S H
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
SERIES 77
Metal Shrink Boot Adapters
319-001 Low Prole EMI/RFI Adapter with Rotatable
Coupling and Shield Sock
How to Order
Sample Part Number 319 F S 001 M 16 06 6 T
Product Series 319
Connector Designator See connector designator table
Angular Function B = 45° A = 90° S = straight
Basic Part Number 001
Finish Symbol
B = cadmium plate, olive drab C = anodize, black
G = hard coat, anodic M = electroless nickel
NF = cadmium plate, olive drab over electroless nickel
Shell Size See dimensions table
Cable Entry Dash No. See cable entry dash number table
Shield Length 1-inch increments, minimum 6 Inches
Shrink Boot Omit for none; see cable entry and shrink boot table
Add "T" to Part Number
for Standard Boot
T
S
T
A
N
D
A
R
D
B
O
O
T
K
I
T
NOTES
1. See Table I on page G-4 for connector designator interface
dimensions
2. Cable Entry is dened as the accomodation range for the
wire bundle or cable. Dimensions shown are not intended for
inspection criteria.
3. O-Ring not supplied with Connector Designator A.
4. When maximum entry is exceeded, Style 2 will be supplied and
dimensions F, G, H and J will not apply. Please consult factory.
5. Standard Boot Kit includes a straight lipped, type 1 material
boot without adhesive. For additional material adhesive options
order separately from section B
6. Glenair 600 series backshell assembly tools are recommnded for
assembly and installation
G-
G
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog
U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice.
Cable Entry and Shrink Boot
Dash
No.
Cable
Entry
Shrink Boot
Part Number
Dash
No.
Cable
Entry
Shrink Boot
Part Number
. (.) N/A . (.) -S
. (.) N/A . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
. (.) -S . (.) -S
SERIES 77
Metal Shrink Boot Adapters
319-001 Low Prole EMI/RFI Adapter with Rotatable
Coupling and Shield Sock
G
F
Shield
Length
Shield
Length
H
J
Single Layer Shield
(Tinned Copper)
A Thread
(Table I)
Typ
C
(Table I)
Typ
O-Ring, Typ
(See Note 3)
1.0
(25.4) Shield
Length
(Approx.)
Cable Entry, Typ
Single Layer Shield
(Tinned Copper)
.140/.130, Typ
STYLE II
.88 (22.4)
Max
STYLE II
(STRAIGHT ONLY)
See Note 4
(45 and 90°)
See Note 4
1.75 (44.45)
MAX
Sym B - 45°
Sym A - 90°
Sym S - Straight
See Pages G-4 and G-5 for Adapter Interface Dimensions
G-
G
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog
U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice.
Cable Entry and Shrink Boots
Dash
No.
Cable
Entry
Shrink Boot
Part Number
. (.) N/A
. (.) N/A
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
. (.) -S
SERIES 77
Metal Shrink Boot Adapters
319-044 Standard Prole EMI/RFI Adapter with
Rotatable Self-Locking Coupling and Shield Sock
How to Order
Sample Part Number 319 F J 044 M 16 06 6 4 T
Product Series 319
Connector Designator See connector designator table
Angular Function H = 45° J = 90° S = straight
Basic Part Number 044
Finish Symbol
B = cadmium plate, olive drab C = anodize, black
G = hard coat, anodic M = electroless nickel
NF = cadmium plate, olive drab over electroless nickel
Shell Size See dimensions table
Cable Entry Dash No. See cable entry dash number table
Shield Length 1-inch increments, minimum 6 Inches
Length (S Only) 1/2-inch increments (e.g. 4 = 2 inches)
Shrink Boot T = shrink boot; see cable entry and shrink boots table Omit for none
Add "T" to Part Number
for Standard Boot
T
S
T
A
N
D
A
R
D
B
O
O
T
K
I
T
Dimensions
Shell Size - Conn. Desig. F
Max
G
Max
H
Max
J
MaxA-F-L-S H
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
. (.) . (.) . (.) . (.)
Connector Designator
AMIL-DTL-, -, Series II and - Series I and III
FMIL-DTL- Series I, II
HMIL-DTL- Series III and IV
LLN
SPATT , PATT , PATT
ROTATABLE COUPLING
SELF-LOCKING
G-
G
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog
U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice.
NOTES
1. Cable Entry is dened as the
accommodation range for the wire
bundle or cable. Dimensions shown are
not intended for inspection criteria.
2. O-Ring not supplied with Connector
Designator A.
3. When maximum entry is exceeded,
Style II will be supplied. Dimensions F, G,
H and J will not apply.
4. For shorter lengths on straight adapters,
please consult the factory
5. Standard Boot Kit includes a straight
lipped, type 1 material boot without
adhesive. For additional material
adhesive options order separately from
section B
6. Glenair 600 series backshell assembly
tools are recommnded for assembly and
installation
SERIES 77
Metal Shrink Boot Adapters
319-044 Standard Prole EMI/RFI Adapter with
Rotatable Self-Locking Coupling and Shield Sock
G
F
Single Layer Shield Typ.
(Tinned Copper)
STYLE II
45° & 90°
See Note 3
1.00 (25.4)
Max
A Thread, Typ
(Table I)
E, Typ.
(Table I) Cable Entry
Length Typ
* Length ± .060 (1.52)
Minimum Order Length 1.5 Inch
(See Note 4)
STYLE II
STRAIGHT
See Note 3
Length ± .060 (1.52)
Min. Order Length 2.0 (50.8)
(See Note 4)
Anti-Rotation
Device (Typ.)
O-Ring (See Note 2)
J
H
Shield Length
(Approx.)
Sym H - 45°
Sym J - 90°
Sym S - Straight
See Pages G-4 and G-5 for Adapter Interface Dimensions
