© 2004 Fairchild Semiconductor Corporation DS500465 www.fairchildsemi.com
June 2001
Revised September 2004
NC7SZ11 Ti nyLogic
UHS 3-Input AND Gate
NC7SZ11
TinyLogic UHS 3-Input AND Gate
General Description
The NC7SZ11 is a single 3-input AND Gate from Fairchild’s
Ultra High Speed Series of T inyLogic. The devi ce i s fa br i-
cated with advanced CMOS technology to achieve ultra
high speed with high output drive while maintaining low
static power dissipation over a very broad VCC operating
range. Th e device is s peci f ied to op erate over the 1.6 5V to
5.5V VCC range. The inputs and output are high impedance
when VCC is 0V. Inpu ts tol e rat e voltages up to 7V inde pe n-
dent of VCC operating voltage.
Features
■Space savin g SC70 6-lead package
■Ultra small MicroPak leadless packa ge
■Ultra High Speed; tPD 2.7 ns Typ into 50 pF at 5V VCC
■High Output Drive; ±24 mA at 3V VCC
■Broad VCC Operating Range; 1.65V to 5.5V
■Power down high impedance inputs/output
■Overvoltage tolerant inputs facilitate 5V to 3V translation
■Patented noise/EMI reduction circuitry implemented
Ordering Code:
Logic Symbol
IEEE/IEC
Pin Descriptions
Function Table
Y = ABC
H = HIGH Logic Level
L = LOW Logic Le v el
X = Either LOW or HIGH Logic Level
Connection Diagrams
(Top V iew)
Pin One Orientation Diagram
AAA represents Product Code Top Mark - see ordering code.
Note: O rientat ion of Top Mark determi nes Pin One lo cation. Read the Top
Product Code Mark left to right, Pin One is the lower left p in (see diagram)
Pad As signme nt for MicroP ak
(Top Thru View)
TinyLogic is a regist ered tradem ark of F airc hild Semiconduc t or Corporation.
MicroPak is a trad emark of F airchild Semiconductor Co rporation.
Order Package Product Code Packag e Descript ion Supp lie d As
Numbe r Numbe r Top Mark
NC7SZ11P6X MAA06A Z11 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel
NC7SZ11L6X MAC 06A E7 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape an d Reel
Pin Names Description
A, B, C Inputs
YOutput
Inputs Output
ABC Y
XXL L
XLX L
LXX L
HHH H
www.fairchildsemi.com 2
NC7SZ11
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions (Note 2)
Note 1: Absolute maxi mum rat ings are DC val ues beyo nd which the devi ce
may be d ama ged or hav e it s u sef ul lif e im pai red . Th e data shee t sp ecif ica-
tions should be met, without exception, to ensure that the system design is
reliable over its power supply, temperature and output/input loading vari-
ables. F airchild does not re commend ope ration outside da tasheet specif i-
cations.
Note 2: Unu s ed inputs m ust be he ld H I GH or LOW. They ma y not fl oat.
DC Electrical Characteristi cs
Supply Voltage (VCC)−0.5V to +7.0V
DC Input Voltage (VIN)−0.5V to +7.0V
DC Output Voltage (VOUT)−0.5V to +7.0V
DC Input Diode Current (IIK)
@VIN < −0.5V −50 mA
@ VIN > 6V +20 mA
DC Output Diode Current (IOK)
@VOUT < −0.5V −50 mA
@ VOUT > 6V, VCC = GND +20mA
DC Output Current (IOUT)±50 mA
DC VCC/GND Current (ICC/IGND)±50 mA
Storage Temperature (TSTG)−65°C to +150°C
Junction Temperature under Bias (TJ) 150°C
Junction Lead Temperature (TL)
(Solder ing, 10 seco nds) 260°C
Power Dissipation (PD) @ +85°C
SC70–5 150 mW
Supply Voltage Operating (VCC) 1.65V to 5.5V
Supply Voltage Data Retention (VCC) 1.5V to 5.5V
Input Voltage (VIN)0V to 5.5V
Output Voltage (VOUT) 0V to VCC
Operating Temp erature (T A)−40°C to +85°C
Input Rise and Fall Time (tr, tf)
VCC = 1.8V, 2.5V ±0.2V 0 ns/V to 20 ns/V
VCC = 3.3V ±0.3V 0 ns/V to 10 ns/V
VCC = 5.0V ±0.5V 0 ns/V to 5 ns/V
Thermal Resistance (θJA)
SC70–5425
°C/W
Symbol Parameter VCC TA = 25°CT
A = −40°C to +85°CUnits Conditions
(V) Min Typ Max Min Max
VIH HIGH Level Input Voltage 1.8 ± 0.15 0.75 VCC 0.75 VCC V
2.3 to 5.5 0.7 VCC 0.7 VCC
VIL LOW Level Input Voltage 1.8 ± 0.15 0.25 VCC 0.25 VCC V
2.3 to 5.5 0.3 VCC 0.3 VCC
VOH HIGH Level Output Voltage 1.65 1.55 1.65 1.55
V
VIN = VIH IOH = −100 µA
2.3 2.2 2.3 2.2
3.0 2.9 3.0 2.9
4.5 4.4 4.5 4.4
1.65 1.29 1.52 1.29 IOH = −4 mA
2.3 1.9 2.15 1.9 IOH = −8 mA
3.0 2.5 2.80 2.4 IOH = −16 mA
3.0 2.4 2.68 2.3 IOH = −24 mA
4.5 3.9 4.20 3.8 IOH = −32 mA
VOL LOW Level Output Voltage 1.65 0.0 0.1 0.1
V
VIN = VIL IOL = 100 µA
2.3 0.0 0.1 0.1
3.0 0.0 0.1 0.1
4.5 0.0 0.1 0.1
1.65 0.08 0.24 0.24 IOL = 4 mA
2.3 0.10 0.3 0.3 IOL = 8 mA
3.0 0.15 0.4 0.4 IOL = 16 mA
3.0 0.22 0.55 0.55 IOL = 24 mA
4.5 0.22 0.55 0.55 IOL = 32 mA
IIN Input Leakage Current 0 to 5.5 ±1±10 µAV
IN = 5.5V, GND
IOFF Power Off Leakage Current 0.0 1 10 µAV
IN or VOUT = 5.5V
ICC Quiescent Supply Current 1.65 to 5.5 2.0 20 µAV
IN = 5.5V, GND
3 www.fairchildsemi.com
NC7SZ11
AC Electrical Characteristics
Note 3: CPD is defined as the value of t he internal equivalent capacitan c e w hic h is deriv ed from dy namic o perating c urrent consump ti on (ICCD) at no outp ut
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic op erating cu rrent by the ex pressio n:
ICCD = (CPD) (VCC) (fIN) + (I CC static)
AC Loading and Waveforms
CL include s l oad and str ay c apacitan ce
Input PRR = 1.0 MHz, t w = 500 ns
FIGURE 1. AC Test Circuit
Input = Ac Waveform; tr = tf = 1.8 ns;
PRR = 10 MHz; Duty Cycle = 50%
FIGURE 2. ICCD Test Circuit
FIGURE 3. AC Waveforms
Symbol Parameter VCC TA = +25°CT
A = −40°C to +85°CUnits Conditions Figure
(V) Min Typ Max Min Max Number
tPLH, Propagation Delay 1.8 ± 0.15 2.0 9.0 18.5 2.0 19.0
ns Figures
1, 3
tPHL 2.5 ± 0.2 0.8 4.9 10.5 0.8 11.0 CL = 15 pF,
3.3 ± 0.3 0.5 3.5 8.5 0.5 9.0 RL = 1 MΩ
5.0 ± 0.5 0.5 2.5 6.5 0.5 7.0
tPLH, Propagation Delay 3.3 ± 0.3 1.5 4.1 8.5 1.5 9.0 ns CL = 50 pF, Figures
1, 3
tPHL 5.0 ± 0.5 0.8 2.9 7.5 0.8 8.0 RL = 500Ω
CIN Input Capacitance 0 4 pF
CPD Power Dissipation Capacitance 3.3 20 pF (Note 3) Figure 2
5.0 25
www.fairchildsemi.com 4
NC7SZ11
Tape and Reel Specification
TAPE FORMAT for SC70
TAPE DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
Leader (Start End) 125 (typ) Empty Sealed
P6X Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Package Tape Size DIM A DIM B DIM F DIM KoDIM P1 DIM W
SC70-6 8 mm 0.093 0.096 0.138 ± 0.004 0.053 ± 0.004 0.157 0.315 ± 0.004
(2.35) (2.45) (3.5 ± 0.1 0) (1.35 ± 0.10) (4) (8 ± 0.1)
5 www.fairchildsemi.com
NC7SZ11
Tape and Reel Specification (Continu ed)
TAPE FORMAT for MicroPak
REEL DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
Leader (Start End) 125 (typ) Empty Sealed
L6X Carrier 5000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty S eale d
Tape
Size ABCDN W1 W2 W3
8 mm 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00)
www.fairchildsemi.com 6
NC7SZ11
Physical Dimensions inches (millimeters) unless otherwise noted
6-Lead SC70, EIAJ SC88, 1.25mm Wide
Package Number MAA06A
7 www.fairchildsemi.com
NC7SZ11 Ti nyLogic
UHS 3-Input AND Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
6-Lead MicroPak , 1.0mm Wide
Package Number MAC06A
Fairchild does not assume an y responsibility for u se of any circuitry d escribed, no circu it patent licenses are im plied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r syst ems are dev ic es or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instruct ions fo r use pr ovi de d in the l abe ling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A crit ical componen t in any com ponen t of a life s uppor t
device or system whose failure to perform can be rea-
sonabl y e xpec ted to cause th e fa i lure of the l ife s upport
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
