Revised September 2004 NC7SZ11 TinyLogic UHS 3-Input AND Gate General Description Features The NC7SZ11 is a single 3-input AND Gate from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. Space saving SC70 6-lead package Ultra small MicroPak leadless package Ultra High Speed; tPD 2.7 ns Typ into 50 pF at 5V VCC High Output Drive; 24 mA at 3V VCC Broad VCC Operating Range; 1.65V to 5.5V Power down high impedance inputs/output Overvoltage tolerant inputs facilitate 5V to 3V translation Patented noise/EMI reduction circuitry implemented Ordering Code: Order Package Product Code Number Number Top Mark NC7SZ11P6X MAA06A Z11 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7SZ11L6X MAC06A E7 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Supplied As Connection Diagrams Logic Symbol IEEE/IEC (Top View) Pin Descriptions Pin One Orientation Diagram Pin Names Description A, B, C Inputs Y Output Function Table Y = ABC Inputs Output A B C Y X X L L X L X L L X X L H H H H AAA represents Product Code Top Mark - see ordering code. Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram) Pad Assignment for MicroPak H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2004 Fairchild Semiconductor Corporation DS500465 www.fairchildsemi.com NC7SZ11 TinyLogic UHS 3-Input AND Gate June 2001 NC7SZ11 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) Supply Voltage (VCC ) -0.5V to +7.0V DC Input Voltage (VIN) -0.5V to +7.0V Supply Voltage Operating (VCC) DC Output Voltage (VOUT) -0.5V to +7.0V Supply Voltage Data Retention (VCC) DC Input Diode Current (IIK) 1.65V to 5.5V 1.5V to 5.5V Input Voltage (VIN) 0V to 5.5V @VIN < -0.5V -50 mA Output Voltage (VOUT) @ VIN > 6V +20 mA Operating Temperature (TA) DC Output Diode Current (IOK) 0V to VCC -40C to +85C Input Rise and Fall Time (tr, tf) @VOUT < -0.5V -50 mA VCC = 1.8V, 2.5V 0.2V 0 ns/V to 20 ns/V @ VOUT > 6V, VCC = GND +20mA VCC = 3.3V 0.3V 0 ns/V to 10 ns/V VCC = 5.0V 0.5V 0 ns/V to 5 ns/V DC Output Current (IOUT) 50 mA DC VCC/GND Current (ICC/IGND) 50 mA Thermal Resistance (JA) -65C to +150 C Storage Temperature (TSTG) 425C/W SC70-5 150 C Junction Temperature under Bias (TJ) Junction Lead Temperature (TL) Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. 260 C (Soldering, 10 seconds) Power Dissipation (PD) @ +85C SC70-5 150 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com TA = 25C VCC Typ TA = -40C to +85C (V) Min Max Min 1.8 0.15 0.75 VCC 0.75 VCC 2.3 to 5.5 0.7 VCC 0.7 VCC Max 0.25 VCC 0.25 VCC 2.3 to 5.5 0.3 VCC 0.3 VCC 1.55 1.65 1.55 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 Conditions V 1.8 0.15 1.65 Units V VIN = VIH IOH = -100 A 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 IOH = -8 mA 3.0 2.5 2.80 2.4 IOH = -16 mA 3.0 2.4 2.68 2.3 IOH = -24 mA 4.5 3.9 4.20 3.8 IOH = -4 mA V IOH = -32 mA 1.65 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 VIN = VIL IOL = 100 A 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.24 2.3 0.10 0.3 0.3 IOL = 8 mA 3.0 0.15 0.4 0.4 IOL = 16 mA 3.0 0.22 0.55 0.55 IOL = 24 mA 4.5 0.22 0.55 0.55 1 10 A VIN = 5.5V, GND 0.0 1 10 A VIN or VOUT = 5.5V 1.65 to 5.5 2.0 20 A VIN = 5.5V, GND 0 to 5.5 2 V IOL = 4 mA IOL = 32 mA Symbol tPLH, Parameter Propagation Delay tPHL tPLH, Propagation Delay tPHL CIN Input Capacitance CPD Power Dissipation Capacitance TA = +25C VCC (V) Min Typ 1.8 0.15 2.0 9.0 2.5 0.2 0.8 4.9 3.3 0.3 0.5 3.5 TA = -40C to +85C Max Min Max 18.5 2.0 19.0 10.5 0.8 11.0 8.5 0.5 9.0 5.0 0.5 0.5 2.5 6.5 0.5 7.0 3.3 0.3 1.5 4.1 8.5 1.5 9.0 5.0 0.5 0.8 2.9 7.5 0.8 8.0 0 4 3.3 20 5.0 25 Units ns ns Conditions CL = 15 pF, RL = 1 M CL = 50 pF, Figure Number Figures 1, 3 RL = 500 Figures 1, 3 (Note 3) Figure 2 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD) (VCC) (fIN) + (ICC static) AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz, tw = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = Ac Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SZ11 AC Electrical Characteristics NC7SZ11 Tape and Reel Specification TAPE FORMAT for SC70 Package Designator P6X Tape Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-6 Tape Size 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) DIM F DIM Ko 0.138 0.004 0.053 0.004 (3.5 0.10) 4 (1.35 0.10) DIM P1 DIM W 0.157 0.315 0.004 (4) (8 0.1) (Continued) TAPE FORMAT for MicroPak Package Tape Number Cavity Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed N W1 W2 W3 REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/-0.000 0.567 W1 + 0.078/-0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/-0.00) (14.40) (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SZ11 Tape and Reel Specification NC7SZ11 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 6 NC7SZ11 TinyLogic UHS 3-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com